prEN ISO 13143-1

Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 12813 - Part 1: Test suite structure and test purposes (ISO/DIS 13143-1:2023)

This document specifies the test suite structure (TSS) and test purposes (TPs) for evaluating the conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO 12813.
It provides a basis for conformance tests for dedicated short-range communication (DSRC) OBE and RSE to support interoperability between different equipment supplied by different manufacturers.
ISO 12813 defines requirements on the compliance check communication (CCC) interface level, but not for the RSE or OBE internal functional behaviour. Consequently, tests regarding OBE and/or RSE functional behaviour remain outside the scope of this document.

Elektronische Gebührenerhebung - Bewertung der Konformität fahrzeuginterner und straßenseitiger Ausrüstung nach ISO 12813 - Teil 1: Struktur und Zweck des Prüfprogrammes (ISO/DIS 13143-1:2023)

Perception de télépéage - Évaluation des équipements embarqués et en bord de route quant à la conformité avec l'ISO 12813 - Partie 1: Structure de suite d'essais et buts des essais (ISO/DIS 13143-1:2023)

Le présent document spécifie la structure de la suite d'essais (TSS, Test Suite Structure) et les buts des essais (TP, Test Purposes) pour évaluer la conformité des équipements embarqués (OBE) et des équipements en bord de route (RSE) par rapport à l'ISO 12813.
Il fournit une base pour les essais de conformité des OBE et RSE de communication dédiée à courte portée (DSRC) afin de permettre l'interopérabilité entre les différents équipements fournis par différents fabricants.
L'ISO 12813 définit les exigences applicables au niveau d'interface de communication de contrôle de conformité CCC mais qui ne concernent pas le comportement fonctionnel interne des RSE et OBE. Par conséquent, les essais relatifs au comportement fonctionnel des OBE et/ou RSE restent en dehors du domaine d'application du présent document.

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme v vozilu in obcestni napravi s standardom ISO 12813 - 1. del: Zgradba preskuševalnega niza in namen preskušanja (ISO/DIS 13143-1:2023)

General Information

• Status: Not Published
• Publication Date: 14-Jul-2025
• ICS: 03.220.20 - Road transport
• ICS: 35.240.20 - IT applications in office work
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278 - Road transport and traffic telematics
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 11-Mar-2024
• Completion Date: 11-Mar-2024
• Ref Project: oSIST prEN ISO 13143-1:2024 - Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 12813 - Part 1: Test suite structure and test purposes (ISO/DIS 13143-1:2023)

Relations

• Revises: EN ISO 13143-1:2020 - Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 12813 - Part 1: Test suite structure and test purposes (ISO 13143-1:2020)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13143-1:2024
01-marec-2024
Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme v vozilu in
obcestni napravi s standardom ISO 12813 - 1. del: Zgradba preskuševalnega niza
in namen preskušanja (ISO/DIS 13143-1:2023)
Electronic fee collection - Evaluation of on-board and roadside equipment for conformity
to ISO 12813 - Part 1: Test suite structure and test purposes (ISO/DIS 13143-1:2023)
Elektronische Gebührenerhebung - Bewertung der Konformität fahrzeuginterner und
straßenseitiger Ausrüstung nach ISO 12813 - Teil 1: Struktur und Zweck des
Prüfprogrammes (ISO/DIS 13143-1:2023)
Perception de télépéage - Évaluation des équipements embarqués et en bord de route
quant à la conformité avec l'ISO 12813 - Partie 1: Structure de suite d'essais et buts des
essais (ISO/DIS 13143-1:2023)
Ta slovenski standard je istoveten z: prEN ISO 13143-1
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
oSIST prEN ISO 13143-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13143-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13143-1:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13143-1
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:
2023-12-18 2024-03-11
Electronic fee collection — Evaluation of on-board and
roadside equipment for conformity to ISO 12813 —
Part 1:
Test suite structure and test purposes
Perception de télépéage — Évaluation des équipements embarqués et en bord de route quant à la
conformité avec l'ISO 12813 —
Partie 1: Structure de suite d'essais et buts des essais
ICS: 03.220.20; 35.240.60
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13143-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13143-1:2024
ISO/DIS 13143-1:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13143-1
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:

Electronic fee collection — Evaluation of on-board and
roadside equipment for conformity to ISO 12813 —
Part 1:
Test suite structure and test purposes
Perception de télépéage — Évaluation des équipements embarqués et en bord de route quant à la
conformité avec l'ISO 12813 —
Partie 1: Structure de suite d'essais et buts des essais
ICS: 03.220.20; 35.240.60
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 13143-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13143-1:2024
ISO/DIS 13143-1:2023(E)
Contents Page
Foreword .
...