iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1065:1998

(Main)

Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests

Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests

This European Standard specifies materials, design requirements, corrosion protection alternatives, production control requirements together with assessment methods using both calculations and testing for open thread and covered thread adjustable telescopic steel props which are intended for use on construction sites.

Baustützen aus Stahl mit Ausziehvorrichtung - Produktfestlegungen, Bemessung und Nachweis durch Berechnung und Versuche

Diese Europäische Norm sieht Festlegungen für Baustützen aus Stahl mit Außiehvorrichtung mit offenem oder verdecktem Gewinde, vor für Werkstoffe, Konstruktion, Korrosionsschutzalternativen, Überwachung der Herstellung sowie Nachweisverfahren durch Berechnung und Prüfung, die für die Verwendung auf Baustellen bestimmt sind.

Etais téléscopiques réglables en acier - Spécifications du produit, conception et évaluation par calculs et essais

Cette Norme Européenne spécifie les matériaux, les exigences de conception, les différentes protections contre la corrosion, les exigences du contrôle de production ainsi que les méthodes d'évaluation utilisant les calculs et les essais pour les étais en acier, télescopies réglables, à filet apparent et à filet recouvert qui sont prévus pour une utilisation sur des chantiers de construction.

Jekleni teleskopski gradbeni podporniki - Specifikacije proizvoda, dimenzioniranje in dokazovanje nosilnosti s preračunom in s preskusi

General Information

Status
Published
Publication Date
22-Sep-1998
Withdrawal Date
30-Mar-1999
ICS
91.220 - Construction equipment
Technical Committee
CEN/TC 53 - Temporary works equipment
Drafting Committee
CEN/TC 53/WG 8 - Specifications for telescopic props
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2023
Ref Project
SIST EN 1065:2000 - Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests

Buy Standard

EN 1065:2000EN 1065:2000
PreviousNext
Standard
EN 1065:2000
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baustützen aus Stahl mit Ausziehvorrichtung - Produktfestlegungen, Bemessung und Nachweis durch Berechnung und VersucheEtais téléscopiques réglables en acier - Spécifications du produit, conception et évaluation par calculs et essaisAdjustable telescopic steel props - Product specifications, design and assessment by calculation and tests91.220Gradbena opremaConstruction equipmentICS:Ta slovenski standard je istoveten z:EN 1065:1998SIST EN 1065:2000en01-maj-2000SIST EN 1065:2000SLOVENSKI
STANDARD
SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 74-2:2022(Main)
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
SIST EN 74-2:2022

This document specifies:
—   materials;
—   design requirements;
—   specified values for resistances and stiffnesses which a coupler has to achieve under test;
—   test procedures and assessment;
for the following special couplers:
—   screw or wedge half couplers, sleeve couplers with shear studs, right angle reduction couplers and swivel reduction couplers.
It gives recommendations for ongoing production control.
These couplers are for use principally in temporary works. Each coupler is able to be fixed to at least one side to one 48,3 mm diameter steel or aluminium tube. For the other side of reduction couplers, this document specifies requirements for the diameter and wall thickness of tubes.
Other special half couplers such as half couplers attached by riveting, used mainly for prefabricated members of scaffolds, are outside the scope of this document.
NOTE   Information on design using special couplers is given in Annex B.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 74-1:2022(Main)
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
SIST EN 74-1:2022

This document specifies, for right angle couplers, swivel couplers, sleeve couplers and parallel couplers working by friction:
—   materials;
—   design requirements;
—   strength classes with different structural parameters including values for resistance and stiffness;
—   test procedures;
—   assessment;
and gives:
—   recommendations for ongoing production control.
These couplers are intended for use in temporary works equipment for example in scaffolds erected in accordance with EN 12811 1 and falsework erected in accordance with EN 12812.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1004-2:2021(Main)
Mobile access and working towers made of prefabricated elements - Part 2: Rules and guidelines for the preparation of an instruction manual
SIST EN 1004-2:2022

This document gives rules and guidelines for the preparation of instruction manuals for mobile access and working towers in accordance with EN 1004-1, Mobile access and working towers made of prefabricated elements - Part 1: Materials, dimensions, design loads, safety and performance requirements.
This document is intended for all parties involved in the preparation of instructions for use, for example: suppliers, technical writers, technical illustrators, translators or other people engaged in the work of conceiving and drafting such instructions for use.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1004-1:2020(Main)
Mobile access and working towers made of prefabricated elements - Part 1: Materials, dimensions, design loads, safety and performance requirements
SIST EN 1004-1:2021

This document applies to the design of mobile access and working towers made of prefabricated elements with dimensions which are fixed by the design and with a height up to 12 m (indoors) and up to 8 m (outdoors). This document applies to mobile access and working towers used as temporary work equipment.
This document:
-   gives guidelines for the choice of the main dimensions and stabilizing methods,
-   gives safety and performance requirements, and
-   gives information on complete towers.
This product standard does not apply to scaffolds according to EN 12810-1 and EN 12811-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17293:2020(Main)
Temporary works equipment - Execution - Requirements for manufacturing
SIST EN 17293:2020

This document specifies requirements for manufacturing components for temporary works equipment:
a)   in a factory; or
b)   on site where manufacturing in a factory is not practicable.
This document specifies requirements for manufacturing components for temporary works equipment in addition or contrary to the requirements of EN 1090-2, EN 1090-3, EN 1090-4, EN 1090-5 and EN 1995-1-1.
Furthermore, this document specifies requirements for manufacturing timber components, designed according to Eurocodes, to be used in temporary works equipment.
This document does not specify requirements for erection and transportation of temporary works equipment.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13374:2013+A1:2018(Main + Amendment)
Temporary edge protection systems - Product specification - Test methods
SIST EN 13374:2013+A1:2019

This document specifies the requirements and test methods for temporary edge protection systems for use during construction or maintenance of buildings and other structures.
This document applies to edge protection systems for flat and inclined surfaces and specifies the requirements for three classes of temporary edge protection.
For edge protection systems with an arrest function (e.g. falling or sliding down a sloping roof) this standard specifies requirements for energy absorption.
This standard includes edge protection systems, some of which are fixed to the structure and others, which rely on gravity and friction on flat surfaces.
This standard does not provide requirements for edge protection systems intended for:
- protection against impact from vehicles or from other mobile equipment,
- protection from sliding down of bulk loose materials, snow etc,
- protection of areas accessible to the public.
This standard does not apply to side protection on scaffolds according to EN 12811-1 and EN 1004.
NOTE This does not prevent these systems to be used on temporary structures.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12811-4:2013(Main)
Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
SIST EN 12811-4:2014

This European Standard specifies product requirements, methods of structural and general design and tests for protection fans for scaffolds to protect workers as well as members of public from objects that may fall off the outside edge of scaffolds being used close to where they are working or passing by.
This European Standard only applies to protection fans while the scaffold is being used as a working place.
Protection fans attached to structures other than scaffolds as defined in EN 12811 1 are outside the scope of this European Standard.
This European Standard applies only to protection fan systems on to which construction debris may fall from 24 m or less.
This European Standard ensures resistance of protection fans for most blunt falling objects representing an impacting energy not exceeding 720 J.
NOTE   This energy corresponds to a 3 kg object falling from 24 m.
This European Standard does not cover the requirements for the total area to be protected against falling items.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16031:2012(Main)
Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests
SIST EN 16031:2012

This European Standard specifies materials, design requirements and designation together with assessment methods using both calculations and testing for adjustable telescopic aluminium props which are intended for use on construction sites.
It outlines eleven classes of nominal specified values for strengths for adjustable telescopic aluminium props, each having a series of maximum extended lengths.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12812:2008(Main)
Falsework - Performance requirements and general design
SIST EN 12812:2008

This European Standard specifies performance requirements and limit state design methods for two design classes of falsework.
It sets out the rules that have to be taken into account to produce a safe falsework structure.
It also provides information where falsework is required to support a "permanent structure", or where the design or supply of falsework has to be commissioned.
This European Standard also gives information on foundations.
This European Standard does not specify requirements for formwork, although formwork may be a part of the falsework construction. Nor does it provide information on access and working scaffolds, which is given in EN 12811-1.
This European Standard does not provide information about site activities. It does not provide information about the use of some standardized products, including timber formwork beams conforming to EN 13377 and props conforming to EN 1065.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 74-3:2007(Main)
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
SIST EN 74-3:2007

EN 74-3 specifies for non adjustable base plates and loose spigots to be used with 48,3 mm diameter tubes in scaffolds and falsework:
-   materials;
-   design requirements;
-   test procedure;
-   assessment.
A base plate with a means of limited vertical adjustment, called a "base jack", is dealt with in EN 12811 1.
NOTE   In the text of this standard, the term "loose spigot" is used instead of the "spigot pin" in the title.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day