EN 14909:2006

Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics

This European Standard specifies the characteristics of flexible sheets of plastics and rubber intended for use as damp proof courses for buildings. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this European Standard.
This European Standard does not cover related products such as preformed cavity trays, coping and flashings.

Abdichtungsbahnen - Kunststoff- und Elastomer-Mauersperrbahnen - Definitionen und Eigenschaften

Diese Europäische Norm legt die Eigenschaften von Abdichtungsbahnen aus Kunststoffen und Elastomeren fest, die als Mauersperrbahnen zur Abdichtung von Bauwerken dienen. Sie enthält die Anforderungen und Prüfverfahren und ermöglicht die Konformitätsbewertung der Produkte nach den Anforderungen dieser Europäischen Norm.
Diese Europäische Norm beinhaltet keine verwandten Produkte, wie vorgefertigte Hohlraumwannen, Mauerkronen und Abdeckungen.

Feuilles souples d'étanchéité - Feuilles plastiques et élastomères utilisées dans les murs contre les remontées d'humidité - Définitions et caractéristiques

La présente Norme européenne spécifie les caractéristiques des feuilles souples plastiques et élastomères
destinées à être utilisées dans les murs de bâtiments contre les remontées capillaires. Elle précise les
exigences et les méthodes d'essais et spécifie un système d'attestation de conformité de ces produits à cette
Norme européenne.
La présente Norme ne porte pas sur des produits connexes tels que les feuilles gaufrées, plaques de
couronnement et bandes solins préformés.

Hidroizolacijski trakovi – Polimerni in elastomerni trakovi za tesnjenje – Definicije in lastnosti

General Information

• Status: Withdrawn
• Publication Date: 11-Apr-2006
• Withdrawal Date: 08-May-2012
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/WG 7 - Vapour control layers and damp proofing products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 09-May-2012
• Completion Date: 09-May-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN 14909:2006 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics

Relations

• Replaced By: EN 14909:2012 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
• Effective Date: 16-May-2012
• Amended By: EN 14909:2006/prA1 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristicsHidroizolacijski trakovi – Polimerni in elastomerni trakovi za tesnjenje – Definicije in lastnostiFeuilles souples d'étanchéité - Feuilles plastiques et élastomeres utilisées dans les murs contre les remontées d'humidité - Définitions et caractéristiquesAbdichtungsbahnen - Kunststoff- und Elastomer-Mauersperrbahnen - Definitionen und EigenschaftenTa slovenski standard je istoveten z:EN 14909:2006SIST EN 14909:2006en91.100.5001.040.91ICS:SLOVENSKI
STANDARDSIST EN 14909:200601-september-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14909April 2006ICS 01.040.91; 91.100.50 English VersionFlexible sheets for waterproofing - Plastic and rubber dampproof courses - Definitions and characteristicsFeuilles souples d'étanchéité - Feuilles plastiques etélastomères utilisées dans les murs contre les remontéesd'humidité - Définitions et caractéristiquesAbdichtungsbahnen - Kunststoff- und Elastomer-Mauersperrbahnen - Definitionen und EigenschaftenThis European Standard was approved by CEN on 2 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14909:2006: E

Product designation code.13 Annex B (normative)
Method of testing the resistance of flexible ventilating damp proof membranes to deformation under load.14 Annex C (normative)
Method of testing for the accelerated ageing of damp proof sheets in an alkaline environment.18 Annex D (informative)
Example of product data sheet.20 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.22 Bibliography.29

This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

1 Scope This European Standard specifies the characteristics of flexible sheets of plastics and rubber intended for use as damp proof courses for buildings. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this European Standard. This European Standard does not cover related products such as preformed cavity trays, coping and flashings. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 495-5, Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing EN 1296, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature EN 1848-2, Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing EN 1849-2, Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing EN 1850-2, Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing EN 1928, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness EN 1931, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties EN 12310-1, Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) EN 12311-2, Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing EN 12317-2, Flexible sheets for waterproofing - Determination of the shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing EN 12691, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact EN 12730, Flexible sheets for waterproofing - Bitumen and rubber sheets for roof waterproofing - Determination of resistance to static loading EN 13416:2001, Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling
...