CEN ISO/TS 17262:2003
(Main)Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures (ISO/TS 17262:2003)
Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures (ISO/TS 17262:2003)
ISO/TS 17262:2003 defines generic numbering and data structures for unambiguous identification of equipment used for Intermodal goods transport. These data are known as Intermodal Goods Transport Numbering and Data Structures.
ISO/TS 17262:2003 defines data independently of the data carrier. The modelling of data is based on Abstract Syntax Notation One (ASN.1) as defined in ISO/IEC 8824. ISO/TS 17262:2003 excludes any physical aspects such as interfaces, dimensions etc. Data that form part of transmission or storage protocols (headers, frame markers and checksums) are excluded.
Data defined in ISO/TS 17262:2003 require a system for control and distribution of number series independent of the different AVI/AEI systems. This is required in order to avoid ambiguity and to provide the necessary level of security where appropriate. For this reason the registration authority defined in ENV ISO 14816 applies for ISO/TS 17262:2003.
ISO/TS 17262:2003 enables the use of optimised encoding schemes such as ASN.1 Basic Packed Encoding Rules (PER).
ISO/TS 17262:2003 provides interoperability, not only between simple AVI/AEI and more complex RTTT/TICS functions, but also with pre-existing Standards such as container (ISO 10374). Specifications for protecting against changes, classifying and qualifying security aspects of the data are out of scope of ISO/TS 17262:2003.
ISO/TS 17262:2003 relates to AVI/AEI units, but not to smaller containers and units being transported. For smaller units (pallet loads, trays, parcels etc.) please refer to ISO/IEC SC 31 standards, ISO 18000 series. The Numbering Structure defined in ISO/TS 17262:2003 is designed to enable combinations with the data definitions from ISO 18000 series. This combination will be covered in CEN ISO/TS 17264 (under preparation).
ISO/TS 17262:2003 provides the capability to carry application data, associated with the identification, to be carried as part of the AVI/AEI message. Within ISO/TS 17262:2003 this is provided as a "black box" facility. The definition of the structure and contents of such messages are outside the scope of ISO/TS 17262:2003 (examples will be shown in CEN ISO/TS 17264).
Identification automatique des véhicules et des équipements - Transport intermodal de marchandises - Structures de données et numérotation (ISO/TS 17262:2003)
Samodejna identifikacija vozil in opreme – Intermodalni prevoz blaga – Strukture oštevilčenja in podatkov (ISO/TS 17262:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 17262:2003
01-oktober-2003
6DPRGHMQDLGHQWLILNDFLMDYR]LOLQRSUHPH±,QWHUPRGDOQLSUHYR]EODJD±6WUXNWXUH
RãWHYLOþHQMDLQSRGDWNRY ,6276
Automatic vehicle and equipment identification - Intermodal goods transport - Numbering
and data structures (ISO/TS 17262:2003)
Identification automatique des véhicules et des équipements - Transport intermodal de
marchandises - Structures de données et numérotation (ISO/TS 17262:2003)
Ta slovenski standard je istoveten z: CEN ISO/TS 17262:2003
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN ISO/TS 17262:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 17262:2003
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 17262:2003
TECHNICAL SPECIFICATION
CEN ISO/TS 17262
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
June 2003
ICS 35.240.60
English version
Automatic vehicle and equipment identification – Intermodal
goods transport – Numbering and data structures (ISO/TS
17262:2003)
Identification automatique des véhicules et des
équipements – Transport intermodal de marchandises –
Structures de données et numérotation (ISO/TS
17262:2003)
This Technical Specification (CEN/TS) was approved by CEN on 25 Novembre 2002 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available. It
is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible
conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 17262:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 17262:2003
CEN ISO/TS 17262:2003 (E)
Contents
1 Scope .5
2 Normative references.6
3 Terms and definitions .7
4 Symbols and abbreviations.8
5 Components of AVI/AEI for intermodal goods transport .9
6 Overview of data definitions.10
7 Data definitions.11
7.1 Access Control Status .11
7.1.1 Description.11
7.1.2 ASN.1 Type .11
7.2 AEI Message Type .11
7.2.1 Description.11
7.2.2 ASN.1 Type .11
7.3 CS9 (SwapBodyStructure) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.