Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects

This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in liquid waste containment projects, and the appropriate test methods to determine these characteristics.
The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, reinforcement and protection.
This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318.
This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures.
NOTE   Particular application cases may contain requirements regarding additional properties and – preferably standardised – test methods, if they are technically relevant.
This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997 1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.

Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Projekten zum Einschluss flüssiger Abfallstoffe

Diese Europäische Norm legt die wichtigsten Eigenschaften von Geotextilien und geotextilverwandten Produkten, die in Projekten zum Einschluss flüssiger Abfallstoffe verwendet werden, sowie die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest.
Bei ihrer vorgesehenen Anwendung werden diese Geotextilien und geotextilverwandten Produkte eine oder mehrere der folgenden Funktionen erfüllen: Filtern Bewehren und Schützen.
Diese Europäische Norm ist nicht auf geosynthetische Dichtungsbahnen anwendbar, wie in EN ISO 10318 festgelegt.
Diese Europäische Norm behandelt die Bewertung und Überprüfung der Leistungsbeständigkeit des Produkts nach dieser Europäischen Norm und die werkseigene Produktionskontrolle.
ANMERKUNG Besondere Anwendungen können Anforderungen hinsichtlich zusätzlicher Eigenschaften und - vorzugsweise genormte - Prüfverfahren enthalten, wenn diese technisch relevant sind.
Diese Europäische Norm darf zur Festlegung von Bemessungswerten herangezogen werden, in dem die im Zusammenhang mit den in EN 1997-1 (Eurocode 7) angegebenen Definitionen, z. B. Sicherheitsbeiwerte, berücksichtigt werden. Für das Produkt sollte die vorgesehene Nutzungsdauer festgelegt werden, weil seine Funktion zeitlich befristet sein kann, als Einbauhilfe oder dauerhaft, weil sie der Nutzungsdauer des Bauwerks entspricht.

Geotextiles et produits apparentés - Caractéristiques requises pour l’utilisation dans les projets de confinement de déchets liquides

La présente Norme européenne spécifie les caractéristiques pertinentes des géotextiles et produits apparentés utilisés dans les projets de confinement de déchets liquides, ainsi que les méthodes d’essai appropriées pour déterminer ces caractéristiques.
L’application de ces géotextiles ou produits apparentés est de remplir au moins l’une des fonctions suivantes : filtration, renforcement et protection.
La présente norme ne s’applique pas aux géomembranes et géosynthétiques bentonitiques tels que définis dans l'EN ISO 10318...
La présente norme permet d’évaluer la conformité du produit à la présente norme européenne et les procédures de contrôle de la production en usine.
Des cas d’application particuliers ou des spécifications nationales peuvent contenir des exigences sur des propriétés supplémentaires et méthodes d’essais - si possible normalisées - si elles sont techniquement pertinentes et ne sont pas en contradiction avec les normes européennes.
La présente norme européenne peut être utilisée pour déduire les valeurs de calcul en prenant en compte les facteurs définis dans l’ EN 1997-1 (Eurocode 7) , par exemple les facteurs de sécurité. Il convient de déterminer la durée de vie prévue du produit, puisque sa fonction peut être provisoire, pour des besoins de construction, ou permanente, pour la durée de vie de la structure.

Geotekstilije in geotekstilijam sorodni izdelki - Značilnosti, ki se zahtevajo pri obvladovanju tekočih odpadkov

General Information

Status
Withdrawn
Publication Date
14-Jan-2014
Withdrawal Date
10-Feb-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
11-Feb-2015

Relations

Buy Standard

Standard
EN 13265:2014
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Projekten zum Einschluss flüssiger AbfallstoffeGéotextiles et produits apparentés - Caractéristiques requises pour l’utilisation dans les projets de confinement de déchets liquidesGeotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects59.080.70GeotekstilijeGeotextiles13.030.20Liquid wastes. SludgeICS:Ta slovenski standard je istoveten z:EN 13265:2014SIST EN 13265:2014en,fr,de01-marec-2014SIST EN 13265:2014SLOVENSKI
STANDARDSIST EN 13265:2001/AC:2004SIST EN 13265:2001/A1:2005SIST EN 13265:20011DGRPHãþD



SIST EN 13265:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13265
January 2014 ICS 59.080.70 Supersedes EN 13265:2000English Version
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les projets de confinement de déchets liquides
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Projekten zum Einschluss flüssiger Abfallstoffe This European Standard was approved by CEN on 9 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13265:2014 ESIST EN 13265:2014



EN 13265:2014 (E) 2 Contents Page Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms, definitions and abbreviations .7 3.1 Terms and definitions .7 3.2 Abbreviations .8 4 Required characteristics and corresponding methods of test .8 4.1 General .8 4.2 Selection of the appropriate standard in a specific application .8 4.3 Characteristics relevant to specific conditions of use . 11 4.3.1 Stiffness at 2 %, 5 % and 10 % . 11 4.3.2 Tensile strength of seams and joints . 11 4.3.3 Static puncture . 11 4.3.4 Friction characteristics .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.