EN 12697-43:2005
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
This document specifies a test method to determine the resistance of a bituminous mixture or pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored from a pavement in a fuel, followed by a brushing period with a steel brush mounted in a Hobart mixer. The material loss of the specimen is a measure of the resistance to that fuel for that bituminous mixture.
NOTE The test is normally carried out with jet fuel.
Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit
Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Treibstoffbeständigkeit von Asphaltmischgütern
oder Fahrbahnbefestigungen aus Asphalt fest. Dieses Verfahren besteht darin, einen im Labor hergestellten
oder durch Kernbohren aus einer Fahrbahnbefestigung entnommenen Probekörper zunächst in Treibstoff zu
lagern und ihn dann mit einer in einem Hobart-Mischer befestigten Stahlbürste zu bürsten. Der Materialverlust
des Probekörpers ist ein Maß für die Beständigkeit des betreffenden Asphalts gegenüber dem betreffenden
Treibstoff.
ANMERKUNG Diese Prüfung wird üblicherweise mit Düsentreibstoff durchgeführt.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 43: Résistance aux carburants
Le présent document spécifie une méthode d’essai destinée à déterminer la résistance aux carburants d’un mélange bitumineux ou d’une chaussée bitumineuse. Le mode opératoire implique tout d’abord l’immersion dans un carburant d’une éprouvette préparée en laboratoire ou extraite de la chaussée, suivie d’une phase de brossage au moyen d’une brosse en acier montée sur un malaxeur. La perte de matériau de l’éprouvette permet de mesurer la résistance du mélange bitumineux à ce carburant.
NOTE L’essai est normalement réalisé avec du carburant pour avions.
Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 43. del: Odpornost proti gorivu
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2005
%LWXPHQVNH]PHVL±3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVL±GHO
2GSRUQRVWSURWLJRULYX
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie
43: Résistance aux carburants
Ta slovenski standard je istoveten z: EN 12697-43:2005
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12697-43
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 93.080.20
English version
Bituminous mixtures - Test methods for hot mix asphalt - Part
43: Resistance to fuel
Mélanges bitumineux - Essais pour enrobés à chaud - Asphalt - Prüfverfahren für Heißasphalt - Teil 43:
Partie 43: Résistance aux carburants Treibstoffbeständigkeit
This European Standard was approved by CEN on 8 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-43:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Scope .6
2 Normative references .6
3 Term and definition.6
4 Principle.6
5 Equipment .7
5.1 Fume cupboard .7
5.2 Beaker with glass rod .7
5.3 Glass funnel .7
5.4 Balance .7
5.5 Oven.7
5.6 Impact hammer or gyrator.7
5.7 Mixer .7
5.8 Steel brush .7
5.9 Connection pin between brush and mixer .8
5.10 Frame to press the specimen to the brush .8
6 Solvents.9
7 Preparation of test specimens .9
8 Procedure .10
8.1 Soaking in fuel and removing the fuel.10
8.1.1 Sample preparation.10
8.1.2 Immersion.10
8.1.3 Cleaning the specimen .10
8.1.4 Loss of mass due to immersion .10
8.2 The brush test .11
8.2.1 General .11
8.2.2 Brush test for a porous asphalt specimen.11
8.2.3 Brush test for a non-porous asphalt specimen .11
8.3 Calculation and expression of results.12
9 Test report .12
10 Precision.13
Bibliography.14
Foreword
This European Standard (EN 12697-43:2005) has been prepared by Technical Committee CEN/TC 227
“Road materials”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn
at the latest by November 2005.
This document is one of a series of standards as listed below:
EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content
EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size
distribution
EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary
evaporator
EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery:
Fractionating column
EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the
maximum density
EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density
of bituminous specimens
EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density
of bituminous specimens by gamma rays
EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void
characteristics of bituminous specimens
EN 12697-9, Bituminous mixtures — Test methods for hot mix asphalt — Part 9: Determination of the
reference density
EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility
EN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the
affinity between aggregates and bitumen
EN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water
sensitivity of bituminous specimens
EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature
measurement
EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content
EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the
segregation sensitivity
EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres
EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous
asphalt specimen
EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage
EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen
EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or
Marshall specimens
EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate
specimens
EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking
EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the
indirect tensile strength of bituminous specimens
EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue
EN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test
EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness
EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling
EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for
determining binder content, water content and grading
EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the
dimensions of a bituminous specimen
EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by
impact compactor
EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by
gyratory compactor
EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of
bituminous mixtures by vibratory compactor
EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by
roller compactor
EN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test
EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing
EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the
thickness of a bituminous pavement
EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the
adhesivity of binder on pre-coated chippings for hot rolled asphalt
EN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and
calibration
EN 12697-39, Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition
prEN 12697-40, Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In-situ drainability
EN 12697-41, Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to de-icing
fluids
EN 12697-42, Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of foreign matter
in reclaimed asphalt
EN 12697-43, Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel
No existing European Standard is superseded.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
1 Scope
This European Standard specifies a test method to determine the resistance of a bituminous mixture or
pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored
from a pavement in a fuel, followed by a brushing period with a steel brush mounted in a mixer. The material
loss of the specimen is a measure of the resistance to that fuel for that bituminous mixture.
NOTE The test is normally carried out with jet fuel.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density
of bituminous specimens
EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling
EN 12697-30, Bituminous mixtures — Test methods fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.