EN 15275:2007
(Main)Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
This European Standard specifies requirements and test methods for the characterisation of anaerobic adhesives intended for the general assembly of co-axial metallic elements in building and civil engineering structures including fasteners- threaded and otherwise, pipes and tubes. It is applicable to single adhesives and systems (kits) comprising adhesives, activators and/or primers for both internal and external construction elements. This European Standard only applies to metallic substrates.
Strukturklebstoffe - Charakterisierung anaerober Klebstoffe für koaxiale Metallverbindungen im Bauwesen
Diese Europäische Norm legt die Anforderungen und Prüfverfahren für die Charakterisierung von anaeroben
Klebstoffen fest, die für die allgemeine Fügeteilanordnung von koaxialen Metallelementen einschließlich
Gewindebefestigungen oder andere Befestigungen von Rohren und Schlauchleitungen in Bauwerken des
Hoch- und Tiefbaus vorgesehen sind. Die Norm gilt für Einkomponentenklebstoffe und Klebstoffsysteme aus
Klebstoffen, Aktivierungsmitteln und/oder Haftvermittlern (Primer). Die vorliegende Europäische Norm gilt nur
für metallische Fügeteile.
Hauptziel der hier dargelegten Prüfverfahren ist die Einstufung und Qualitätskontrolle von anaeroben
Klebstoffen, jedoch darf keines der Prüfergebnisse als zuverlässige Grundlage für Konstruktionszwecke
dienen. Konstruktionsdaten sollten vorzugsweise mittels Prüfungen erhalten werden, bei denen die bei der
eigentlichen Konstruktion verwendeten Konstruktionsmaterialien und -anordnungen verwendet werden. Die in
dieser Norm festgelegten Werte sind dafür vorgesehen, eine allgemeine oder typische Eignung für die
Verwendung eines anaeroben Klebstoffs bei einer bestimmten Verwendung in Bauwerken des Hoch- und
Tiefbaus anzuzeigen.
Adhésifs structuraux - Caractérisation des adhésifs anaérobies pour assemblages métalliques coaxiaux dans les bâtiments et ouvrages de génie civil
La présente Norme européenne spécifie les exigences et les méthodes d’essai permettant de caractériser les adhésifs anaérobies destinés à l’assemblage général d’éléments métalliques coaxiaux dans des bâtiments et des ouvrages de génie civil, notamment les éléments de fixation, filetés ou non, les tuyaux et les tubes. Elle s’applique aux adhésifs monocomposant et aux systèmes (kits prêts à l’utilisation) comprenant des adhésifs, des activateurs et/ou des primaires, tant pour les éléments de construction internes qu’externes. La présente Norme européenne ne s’applique qu’aux supports métalliques.
Konstrukcijska lepila - Karakterizacija anaerobnih lepil za koaksialne metalne konstrukcije v zgradbah in objektih
Ta evropski standard določa zahteve in preskusne metode za karakterizacijo anaerobnih lepil, namenjenih za splošne konstrukcije koaksialnih metalnih elementov v zgradbah in objektih, vključno s sponkami z navojem ali cevmi. Uporablja se za posamezna lepila in sisteme, ki zajemajo lepila, aktivatorje in/ali temeljne premaze. Ta evropski standard velja zgolj za metalne substrate. Temeljni cilj tu predstavljenih preskusnih metod je razvrščanje in nadzor kakovosti anaerobnih lepil, zato se za namene konstruiranja ne sme zanašati na katere koli preskusne rezultate. Podatki glede konstruiranja se po možnosti pridobivajo iz preskusov, pri katerih se uporabljajo konstrukcijski materiali in konfiguracije, uporabljene pri dejanskem konstruiranju. Vrednosti, opredeljene v tem standardu, se štejejo kot pokazatelj splošne ali značilne primernosti uporabe anaerobnih lepil pri določeni uporabi v zgradbah in objektih.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Konstrukcijska lepila - Karakterizacija anaerobnih lepil za koaksialne metalne konstrukcije v zgradbah in objektihStrukturklebstoffe - Charakterisierung von anaeroben Klebstoffen für koaxiale metallische Baugruppen in Bauwerken des Hoch- und TiefbausAdhésifs structuraux - Caractérisation des adhésifs anaérobies pour assemblages métalliques coaxiaux dans les bâtiments et ouvrages de génie civilStructural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 15275:2007SIST EN 15275:2009en,fr,de01-januar-2009SIST EN 15275:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15275October 2007ICS 83.180 English VersionStructural adhesives - Characterisation of anaerobic adhesivesfor co-axial metallic assembly in building and civil engineeringstructuresAdhésifs structuraux - Caractérisation des adhésifsanaérobies pour assemblages métalliques coaxiaux dansles bâtiments et ouvrages de génieStrukturklebstoffe - Charakterisierung anaerober Klebstoffefür koaxiale Metallverbindungen im BauwesenThis European Standard was approved by CEN on 16 September 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15275:2007: ESIST EN 15275:2009
Indicative values for performance characteristics.11 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Construction Products Directive.12 ZA.1 Scope and relevant characteristics.12 ZA.2 Procedure for attestation of conformity of anaerobic adhesives.13 ZA.2.1 System of attestation of conformity.13 ZA.2.2 EC Certificate and Declaration of conformity.14 ZA.3 CE marking and labelling.15 Bibliography.18
Introduction Anaerobic adhesives are single component adhesives that cure in absence of oxygen, curing being inhibited by the presence of oxygen and catalysed by metal ions. Polymerisation takes normally place at room temperature. Due to their curing properties these adhesives are well suited for easy assembling threaded and otherwise, pipes and tubes in building and civil engineering structures. By the curing reaction a polymeric material is formed, which fills narrow gaps or micro-imperfections of threads thus sealing and bonding the joint. In addition, anaerobic adhesives may be used to joint load-bearing parts of the structures when used in tubular lap joints or pin-into-bore type joints. The primary aim of the test methods presented herein is for ranking and quality control of anaerobic adhesives and reliance should not be placed on any test results for design purposes. Design data should preferably be obtained from tests using the construction materials and configurations used in the actual design. The requirements to the assemblies are strongly depending on the intended use. Apart from the sealing ability, strength requirements may conflict with the intention to regular or occasional dismantling the joint for maintenance purposes. The values defined in this standard are considered to indicate a general or typical suitability for use of an anaerobic adhesive in a particular application in building and civil engineering structures. SIST EN 15275:2009
5.2.1 Nm EN ISO 10964Only for products intended for use for securing or locking metallic threaded assemblies. The fastener specimen should be preloaded at 5 Nm, otherwise the input torque has to be explicitly mentioned in brackets (Input Torque in Nm). If unseated assemblies have been used, use the expression Unseated Assemblies in brackets. 5 Durability a
5.1.2 N/mm²
or as ratio to shear strength at room temperature, No. 1 EN 15337 Shear Strength after 1000 h exposure to 100 °C
Only for products intended for use for retaining metallic co-axial cylindrical joints such as load bearing tubular or pin-and-collar-type cylindrical assemblies. Expresses durability as shear strength or retention of the shear strength measured in accordance with EN 15337 after 1 000 h exposure to 100 °C (and if required to 150 °C). 6 Durability a
5.2.2 Nm or as ratio to breakaway torque at room temperature, No. 2 EN ISO 10964Breakaway Torque after 1000 h exposure to 100 °C a Only for products intended for use for securing or locking metallic threaded assemblies. Expresses durability as torque strength or retention of the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.