EN ISO 9047:2003

Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001)

This International Standard specifies a method for the determination of the adhesion/cohesion properties of sealants
with predominantly elastic behaviour which are used in joints in building construction.

Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen bei unterschiedlichen Temperaturen (ISO 9047:2001)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen mit vorwiegend elastischem Verhalten fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.

Construction immobilière - Produits pour joints - Détermination des propriétés d'adhésivité/cohésion des mastics à température variable (ISO 9047:2001)

La présente Norme internationale prescrit une méthode de détermination des propriétés d'adhésivité/cohésion des
mastics de comportement essentiellement élastique qui sont utilisés pour des joints dans la construction
immobilière.

Gradnja objektov - Tesnilne mase - Ugotavljanje adhezijskih/kohezijskih lastnosti pri spremenljivi temperaturi (ISO 9047:2001)

Določa metodo za ugotavljanje adhezijskih / kohezijskih lastnosti tesnilnih mas s pretežno elastičnim obnašanjem, ki se uporabljajo v spojih pri gradnji objektov.

General Information

• Status: Published
• Publication Date: 06-May-2003
• Withdrawal Date: 29-Nov-2003
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/SS B02 - Structures
• Drafting Committee: CEN/SS B02 - Structures
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-May-2003
• Completion Date: 07-May-2003
• Ref Project: SIST EN ISO 9047:2008 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001)

Relations

• Replaces: EN ISO 9047:1997 - Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures (ISO 9047:1989)
• Effective Date: 22-Dec-2008
• Corrected By: EN ISO 9047:2003/AC:2009 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001/Cor 1:2009)
• Effective Date: 26-Sep-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9047:2008
01-november-2008
1DGRPHãþD
SIST EN ISO 9047:2001
Gradnja objektov - Tesnilne mase - Ugotavljanje adhezijskih/kohezijskih lastnosti
pri spremenljivi temperaturi (ISO 9047:2001)
Building construction - Jointing products - Determination of adhesion/cohesion properties
of sealants at variable temperatures (ISO 9047:2001)
Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von
Dichtstoffen bei unterschiedlichen Temperaturen (ISO 9047:2001)
Construction immobilière - Produits pour joints - Détermination des propriétés
d'adhésivité/cohésion des mastics à température variable (ISO 9047:2001)
Ta slovenski standard je istoveten z: EN ISO 9047:2003
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 9047:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9047:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 9047:2008
EUROPEAN STANDARD
EN ISO 9047
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2003
ICS 91.100.50 Supersedes EN ISO 9047:1997
English version
Building construction - Jointing products - Determination of
adhesion/cohesion properties of sealants at variable
temperatures (ISO 9047:2001)
Construction immobilière - Produits pour joints - Hochbau - Fugendichtstoffe - Bestimmung des Haft- und
Détermination des propriétés d'adhésivité/cohésion des Dehnverhaltens von Dichtstoffen bei unterschiedlichen
mastics à température variable (ISO 9047:2001) Temperaturen (ISO 9047:2001)
This European Standard was approved by CEN on 28 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9047:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9047:2008
EN ISO 9047:2003 (E)
Foreword
The text of ISO 9047:2001 has been prepared by Technical Committee ISO/TC 59 "Building
construction" of the International Organization for Standardization (ISO) has been taken over as
a European Standard by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2003, and conflicting national
standards shall be withdrawn at the latest by November 2003.
This document supersedes EN ISO 9047:1997.
A separate European standard, EN 1279-4, is used for the testing of sealants for insulating glass
units.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 9047:2001 has been approved by CEN as EN ISO 9047:2003 without any
modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9047:2008
EN ISO 9047:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been
...