Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures (ISO 9047:1989)

Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens bei unterschiedlichen Temperaturen (ISO 9047:1989)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen mit vorwiegend plastischem Verhalten fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.

Construction immobilière - Mastics - Détermination des propriétés d'adhésivité/cohésion à températures variables (ISO 9047:1989)

La CEI 60626-1:2009 contient les définitions et les exigences générales applicables aux matériaux isolants souples combinés destinés à l'isolement électrique. La présente norme ne concerne pasle papier de mica en tant que composante primaire, couvert par la CEI 60371, mais le papier de mica peut être utilisé comme matériau complémentaire. Les changements principaux par rapport à l'édition précédente sont le domaine d'application a été révisé pour spécifier le traitement de papier MICA, et Tableau 1 a été révisé annulant les matériaux qui ne sont plus utilisés et présentant des matériaux plus récents.

Gradnja objektov - Tesnilne mase - Ugotavljanje adhezijskih/kohezijskih lastnosti pri spremenljivi temperaturi

General Information

Status
Withdrawn
Publication Date
23-Sep-1997
Withdrawal Date
06-May-2003
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Due Date
07-May-2003
Completion Date
07-May-2003

RELATIONS

Buy Standard

Standard
EN ISO 9047:2001
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 9047:2001
01-december-2001
1DGRPHãþD
SIST ISO 9047:1996

Gradnja objektov - Tesnilne mase - Ugotavljanje adhezijskih/kohezijskih lastnosti

pri spremenljivi temperaturi

Building construction - Sealants - Determination of adhesion/cohesion properties at

variable temperatures (ISO 9047:1989)
Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens bei
unterschiedlichen Temperaturen (ISO 9047:1989)

Construction immobiliere - Mastics - Détermination des propriétés d'adhésivité/cohésion

a températures variables (ISO 9047:1989)
Ta slovenski standard je istoveten z: EN ISO 9047:1997
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 9047:2001 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
Is0
INTERNATIONAL
STANDARD 9047
First edition
1989-10-15
Building construction - Sealants -
Determination of adhesion/cohesion properties
at variable temperatures
Construction immobili&re - Mastics - Dhermina tion des proprik!t&
d’adh&iviWcoht!sion A tempka tures variables
Reference number
IS0 9047 : 1989 (El
---------------------- Page: 2 ----------------------
1s0 9407 : 1989 E)
Foreword

IS0 (the International Organization for Standardization) is a worldwide federation of

national standards bodies (IS0 member bodies). The work of preparing International

Standards is normally carried out through IS0 technical committees. Each member

body interested in a subject for which a technical committee has been established has

the right to be represented on that committee. International organizations, govern-

mental and non-governmental, in liaison with ISO, also take part in the work. IS0

collaborates closely with the International Electrotechnical Commission (IEC) on all

matters of electrotechnical standardization.

Draft International Standards adopted by the technical committees are circulated to

the member bodies for approval before their acceptance as International Standards by

the IS0 Council. They are approved in accordance with IS0 procedures requiring at

least 75 % approval by the member bodies voting.
International Standard IS0 9047 was prepared by Technical Committee ISO/TC 59,
Building cons true tion .
0 IS0 1989

All rights reserved. No part of this publication may be reproduced or utilized in any form or by any

means, electronic or mechanical, including photocopying and microfilm, without permission in

writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
---------------------- Page: 3 ----------------------
IS0 9047 : 1989 (E)
INTERNATIONAL STANDARD
Building construction - Sealants - Determination of
adhesion/cohesion properties at variable temperatures
1 Scope defined conditions, recording of any breaks in adhesion or
cohesion.
This International Standard specifies a method for determining
the adhesion/cohesion properties of sealants with predomi-
nantly elastic behaviour which are used in joints in building con- 5 Apparatus
struction.
5.1 Concrete and/or aluminium supports, for the prep-
aration of test specimens (two supports of the same nature are
2 Normative reference
required for each test specimen), of dimensions as shown in
figures 1 and 2.
The following standard contains provisions which, through
reference in this text, constitute provisions of this International
mm x 12 mm x 12,5 mm,
5.2 Spacers, of dimensions 12
Standard. At the time of publication, the edition indicated
for the preparation of test specimens (see figures 1 and 2).
was valid. All standards are subject to revision, and parties to
agreements based on this International Standard are encouraged
to investigate the possibility of applying the most recent
5.3 Anti-adherent substrate, for the preparation of test
edition of the standard indicated below. Members of IEC and
specimens, for exampie polytetrafluoroethylene (PTFE) film or
IS0 maintain registers of currently valid International Stan-
vellumpaper, preferably according to the indications of the
dards.
sealant manufacturer.
IS0 6927 : 1981, Building construction - Jointing products -
Sealants - Vocabulary.
5.4 Test machin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.