Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete

This Part of prEN 1504 specifies requirements for the identification, performance (including durability aspects), safety and evaluation of conformity of products and systems to be used for surface protection of concrete, to increase the durability of concrete and reinforced concrete structures, as well as for new concrete and for maintenance and repair work.
The surface protective methods covered by this standard are the following:
-   hydrophobic impregnation;
-   impregnation;
-   coating.
Flooring systems in buildings which are not intended to protect or reinstate the integrity of a concrete structure are standardised in EN 13813.
When products and systems complying with this standard are used in flooring applications that involve substantial mechanical loading , they should also satisfy the requirements of EN 13813.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton

Dieser Teil der prEN 1504 legt Anforderungen an die Identität, die Leistung (einschließlich Aspekten der Dauerhaftigkeit), die Sicherheit und die Beurteilung der Konformität von Produkten und Systemen fest, die für den Oberflächenschutz von Beton, zur Verbesserung der Dauerhaftigkeit von Beton? und Stahlbetontragwerken sowie für neuen Beton und für Instandhaltungs? und Instandsetzungsarbeiten angewendet werden.
In der vorliegenden Norm werden folgende Oberflächenschutzverfahren behandelt:
-   hydrophobierende Imprägnierung;
-   Imprägnierung;
-   Beschichtung.
In Gebäuden verwendete Bodenbelagssysteme, die nicht dafür vorgesehen sind, die Dauerhaftigkeit eines Betontragwerkes zu schützen oder wiederherzustellen, sind in EN 13813 genormt.
Werden Produkte und Systeme, die dieser Norm entsprechen, als Bodenbelagssysteme angewendet, die wesentlichen mechanischen Beanspruchungen ausgesetzt sind, müssen sie auch die Anforderungen der EN 13813 erfüllen.

Produits et systèmes pour la protection et la réparation de structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 2: Systèmes de protection de surface pour béton

La présente norme spécifie les prescriptions pour l'identification, les performances (y compris les aspects de durabilité) et la sécurité des produits et systèmes devant être utilisés pour la protection de surface du béton, afin d'augmenter la durabilité du béton et des structures en béton armé, aussi bien pour un nouveau béton que pour des travaux de maintenance et réparation. Par conséquent, cette norme inclut également des propriétés particulères en plus des mesures de p protection de surface.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Definicije, zahteve, kontrola kakovosti in ovrednotenje skladnosti - 2. del: Sistemi za zaščito površine betona

General Information

Status
Published
Publication Date
19-Oct-2004
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
21-Apr-2022

Buy Standard

Standard
EN 1504-2:2004
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concreteProduits et systemes pour la protection et la réparation de structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 2: Systemes de protection de surface pour bétonProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton91.080.40Betonske konstrukcijeConcrete structures01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:SIST EN 1504-2:2004enTa slovenski standard je istoveten z:EN 1504-2:200401-december-2004SIST EN 1504-2:2004SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1504-2October 2004ICS 01.040.91; 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Definitions, requirements, quality control andevaluation of conformity - Part 2: Surface protection systems forconcreteProduits et systèmes pour la protection et la réparation destructures en béton - Définitions, prescriptions, maîtrise dela qualité et évaluation de la conformité - Partie 2:Systèmes de protection de surface pour bétonProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Definitionen,Anforderungen, Qualitätsüberwachung und Beurteilung derKonformität - Teil 2: Oberflächenschutzsysteme für BetonThis European Standard was approved by CEN on 30 July 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1504-2:2004: E



EN 1504-2:2004 (E) 2 Contents page Foreword.3 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.9 4 Performance characteristics for intended uses.10 4.1 General.10 4.2 Selection of appropriate products or systems.11 5 Requirements.14 5.1 Identification requirements.14 5.2 Performance requirements.15 5.3 Release of dangerous substances.15 5.4 Reaction to fire.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.