EN ISO 7010:2020
(Main)Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2019, Corrected version 2020-06)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2019, Corrected version 2020-06)
This document prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864‑1 and the design of the graphical symbols is according to ISO 3864‑3.
This document is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this document and of the ISO 3864 series.
This document specifies the safety sign originals that can be scaled for reproduction and application purposes.
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO 7010:2019, korrigierte Fassung 2020-06)
Dieses Dokument legt Sicherheitszeichen fest, die für den Zweck der Unfallverhütung, des Brandschutzes, des Schutzes vor Gesundheitsgefährdungen und für Fluchtwege angewendet werden.
Die Form und Farbe der Sicherheitszeichen entsprechen ISO 3864 1 und die Gestaltung der graphischen Symbole entspricht ISO 3864 3.
Dieses Dokument gilt für alle Stellen und Bereiche, an denen Sicherheitsfragen für Personen geregelt werden müssen. Sie gilt nicht für die Zeichengebung im Eisenbahn-, Straßen-, Binnenschiffs-, See- und Luftverkehr; allgemein gesagt, nicht in solchen Bereichen, die Regelungen unterliegen, die von diesem Dokument und den Normen der Reihe ISO 3864 abweichen können.
Dieses Dokument legt die Sicherheitszeichen Urbilder fest, die für die Reproduktion und Anwendung in der Größe angepasst werden können.
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité enregistrés (ISO 7010:2019, Version corrigée 2020-06)
Le présent document prescrit les signaux de sécurité à utiliser dans le cadre de la prévention des accidents, de la lutte contre l'incendie, de l'information sur les risques d'atteinte à la santé et de l'évacuation d'urgence.
La forme et la couleur de chaque signal de sécurité sont conformes à l'ISO 3864‑1 et la conception des symboles graphiques est conforme à l'ISO 3864‑3.
Le présent document s'applique dans tous les lieux et secteurs où des questions relatives à la sécurité des personnes sont susceptibles de se poser. Il n'est toutefois pas applicable à la signalisation utilisée dans le trafic ferroviaire, routier, fluvial, maritime et aérien, ni d'une manière générale, aux secteurs qui sont soumis à une réglementation pouvant différer en certains points du présent document et de la série de normes ISO 3864.
Le présent document spécifie des originaux de signaux de sécurité qui peuvent être réduits ou agrandis pour des besoins de reproduction et d'application.
Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki (ISO 7010:2019, popravljena verzija 2020-06)
Ta dokument določa opozorilne znake za preprečevanje nesreč, zaščito pred požari, informacije o nevarnostih za zdravje in zasilno evakuacijo.
Oblika in barva posameznega varnostnega znaka sta skladni s standardom ISO 3864-1, oblika grafičnih simbolov pa s standardom ISO 3864-3.
Ta dokument se uporablja za vse lokacije, za katere je treba obravnavati vprašanja varnosti, povezana z ljudmi. Vendar se ne uporablja za signaliziranje, ki se uporablja za železniški, cestni, rečni, pomorski in letalski promet ter na splošno za tiste sektorje, za katere veljajo predpisi, ki se lahko razlikujejo v nekaterih točkah tega dokumenta in skupine standardov ISO 3864.
Ta dokument določa izvirnik varnostnega znaka, katerega velikost je mogoče spremeniti za namene razmnoževanja in uporabe.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2020
Nadomešča:
SIST EN ISO 7010:2012
SIST EN ISO 7010:2012/A1:2014
SIST EN ISO 7010:2012/A2:2014
SIST EN ISO 7010:2012/A3:2014
SIST EN ISO 7010:2012/A4:2014
SIST EN ISO 7010:2012/A5:2015
SIST EN ISO 7010:2012/A6:2017
SIST EN ISO 7010:2012/A7:2017
Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki
(ISO 7010:2019, popravljena verzija 2020-06)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO
7010:2019, Corrected version 2020-06)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2019, korrigierte Fassung 2020-06)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité
enregistrés (ISO 7010:2019, Version corrigée 2020-06)
Ta slovenski standard je istoveten z: EN ISO 7010:2020
ICS:
01.080.10 Simboli za javno obveščanje. Public information symbols.
Znaki. Table. Označbe Signs. Plates. Labels
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 7010
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 01.080.10; 01.080.20 Supersedes EN ISO 7010:2012
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs (ISO 7010:2019, Corrected version
2020-06)
Symboles graphiques - Couleurs de sécurité et signaux Graphische Symbole - Sicherheitsfarben und
de sécurité - Signaux de sécurité enregistrés (ISO Sicherheitszeichen - Registrierte Sicherheitszeichen
7010:2019, Version corrigée 2020-06) (ISO 7010:2019, korrigierte Fassung 2020-06)
This European Standard was approved by CEN on 14 March 2020.
This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 01 July 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 7010:2019, Corrected version 2020-06 has been prepared by Technical Committee
ISO/TC 145 "Graphical symbols” of the International Organization for Standardization (ISO) and has
been taken over as EN ISO 7010:2020 by Technical Committee CEN/SS F16 “Graphical symbols” the
secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2020, and conflicting national standards
shall be withdrawn at the latest by September 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7010:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 7010:2019, Corrected version 2020-06 has been approved by CEN as EN ISO 7010:2020
without any modification.
INTERNATIONAL ISO
STANDARD 7010
Third edition
2019-07
Corrected version
2020-06
Graphical symbols — Safety colours
and safety signs — Registered safety
signs
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
Reference number
ISO 7010:2019(E)
©
ISO 2019
ISO 7010:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 7010:2019(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Referents and categorization of safety signs . 2
4.1 General . 2
4.2 Referent (safety meaning) . 2
4.3 Categorization of safety signs . 8
5 Registered safety signs . 9
Bibliography .298
ISO 7010:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee
SC 2, Safety identification, signs, shapes, symbols and colours.
This third edition cancels and replaces the second edition (ISO 7010:2011), which has been technically
revised. The main changes to the previous edition are as follows:
The safety signs from
— ISO 7010:2011/Amd 1:2012,
— ISO 7010:2011/Amd 2:2012,
— ISO 7010:2011/Amd 3:2012,
— ISO 7010:2011/Amd 4:2013,
— ISO 7010:2011/Amd 5:2014,
— ISO 7010:2011/Amd 6:2014,
— ISO 7010:2011/Amd 7:2016,
— ISO 7010:2011/Amd 8:2017,
— ISO 7010:2011/Amd 9:2018 and
— ISO 20712-1:2008
have been incorporated with a few minor text adjustments.
This edition also cancels and replaces ISO 20712-1:2008.
All safety signs are available on the ISO Online browsing platform at https:// www .iso .org/ obp.
iv © ISO 2019 – All rights reserved
ISO 7010:2019(E)
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
This corrected version of ISO 7010:2019 incorporates the following corrected safety signs:
— mandatory action signs: M053 and M054;
— prohibition signs: P048 to P052, P054, P055, P057 to P059, P061 to P066;
— warning signs: W043, W045 to W050, W052, W053, W057, W058, W060 to W063, W065, W066.
ISO 7010:2019(E)
Introduction
There is a need to standardize a system of providing safety information that relies as little as possible
on the use of words to achieve understanding.
Continued growth in international trade, travel and mobility of labour requires a common method of
communicating safety information.
Lack of standardization may lead to confusion and the risk of accidents.
The use of standardized safety signs does not replace proper work methods, instructions and accident
prevention training or measures. Education is an essential part of any system that provides safety
information.
The safety signs are intended for use only where there is a risk to people. They may appear in safety
signage in workplaces and public areas, safety manuals and notices, product labelling and escape and
evacuation plans, as appropriate.
This document is intended to be used by all Technical Committees within ISO charged with developing
specific safety signing for their industry, to ensure that there is only one safety sign for each safety
meaning. It is also intended that this document be revised regularly to include safety signs as they are
standardized by ISO, and which conform to the design principles given in the ISO 3864 series.
The safety signs in this document have been validated by ISO/TC 145/SC 2 according to procedures of
standardization current at the time of publication.
NOTE 1 Some countries' statutory regulations might differ in some respects from those given in this
document.
NOTE 2 Information on procedures, criteria of acceptability, safety sign templates and application of safety
signs, as well as translations of the referents, can be found at http:// www .iso .org/ tc145/ sc2.
vi © ISO 2019 – All rights reserved
INTERNATIONAL STANDARD ISO 7010:2019(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
IMPORTANT — The colours represented in the electronic file of this document can be neither
viewed on screen nor printed as true representations. For the purposes of colour matching,
see ISO 3864-4 which provides colorimetric and photometric properties together with, a
...
SLOVENSKI STANDARD
01-junij-2020
Nadomešča:
SIST EN ISO 7010:2012
SIST EN ISO 7010:2012/A1:2014
SIST EN ISO 7010:2012/A2:2014
SIST EN ISO 7010:2012/A3:2014
SIST EN ISO 7010:2012/A4:2014
SIST EN ISO 7010:2012/A5:2015
SIST EN ISO 7010:2012/A6:2017
SIST EN ISO 7010:2012/A7:2017
Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki
(ISO 7010:2019)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO
7010:2019)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2019)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité
enregistrés (ISO 7010:2019)
Ta slovenski standard je istoveten z: EN ISO 7010:2020
ICS:
01.080.10 Simboli za javno obveščanje. Public information symbols.
Znaki. Table. Označbe Signs. Plates. Labels
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 7010
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 01.080.10; 01.080.20 Supersedes EN ISO 7010:2012
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs (ISO 7010:2019)
Symboles graphiques - Couleurs de sécurité et signaux Graphische Symbole - Sicherheitsfarben und
de sécurité - Signaux de sécurité enregistrés (ISO Sicherheitszeichen - Registrierte Sicherheitszeichen
7010:2019) (ISO 7010:2019)
This European Standard was approved by CEN on 14 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 7010:2019 has been prepared by Technical Committee ISO/TC 145 "Graphical symbols”
of the International Organization for Standardization (ISO) and has been taken over as
held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2020, and conflicting national standards
shall be withdrawn at the latest by September 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7010:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 7010:2019 has been approved by CEN as EN ISO 7010:2020 without any modification.
INTERNATIONAL ISO
STANDARD 7010
Third edition
2019-07
Graphical symbols — Safety colours
and safety signs — Registered safety
signs
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
Reference number
ISO 7010:2019(E)
©
ISO 2019
ISO 7010:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 7010:2019(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Referents and categorization of safety signs . 2
4.1 General . 2
4.2 Referent (safety meaning) . 2
4.3 Categorization of safety signs . 8
5 Registered safety signs . 9
Bibliography .298
ISO 7010:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee
SC 2, Safety identification, signs, shapes, symbols and colours.
This third edition cancels and replaces the second edition (ISO 7010:2011). The following changes have
been made with respect to the previous edition:
The safety signs from
— ISO 7010:2011/Amd 1:2012,
— ISO 7010:2011/Amd 2:2012,
— ISO 7010:2011/Amd 3:2012,
— ISO 7010:2011/Amd 4:2013,
— ISO 7010:2011/Amd 5:2014,
— ISO 7010:2011/Amd 6:2014,
— ISO 7010:2011/Amd 7:2016,
— ISO 7010:2011/Amd 8:2017,
— ISO 7010:2011/Amd 9:2018,
— ISO 7010:2011/DAmd 240:2018,
— ISO 7010:2011/DAmd 241:2018,
— ISO 7010:2011/DAmd 242:2018 and
— ISO 20712-1:2008
iv © ISO 2019 – All rights reserved
ISO 7010:2019(E)
have been incorporated with a few minor text adjustments.
This edition also cancels and replaces ISO 20712-1:2008.
All safety signs are available on the ISO Online browsing platform at https: //www .iso .org/obp.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
ISO 7010:2019(E)
Introduction
There is a need to standardize a system of providing safety information that relies as little as possible
on the use of words to achieve understanding.
Continued growth in international trade, travel and mobility of labour requires a common method of
communicating safety information.
Lack of standardization may lead to confusion and the risk of accidents.
The use of standardized safety signs does not replace proper work methods, instructions and accident
prevention training or measures. Education is an essential part of any system that provides safety
information.
The safety signs are intended for use only where there is a risk to people. They may appear in safety
signage in workplaces and public areas, safety manuals and notices, product labelling and escape and
evacuation plans, as appropriate.
This document is intended to be used by all Technical Committees within ISO charged with developing
specific safety signing for their industry, to ensure that there is only one safety sign for each safety
meaning. It is also intended that this document be revised regularly to include safety signs as they are
standardized by ISO, and which conform to the design principles given in the ISO 3864 series.
The safety signs in this document have been validated by ISO/TC 145/SC 2 according to procedures of
standardization current at the time of publication.
NOTE 1 Some countries' statutory regulations might differ in some respects from those given in this
document.
NOTE 2 Information on procedures, criteria of acceptability, safety sign templates and application of safety
signs, as well as translations of the referents, can be found at http: //www .iso .org/tc145/sc2.
vi © ISO 2019 – All rights reserved
INTERNATIONAL STANDARD ISO 7010:2019(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
IMPORTANT — The colours represented in the electronic file of this document can be neither
viewed on screen nor printed as true representations. For the purposes of colour matching,
see ISO 3864-4 which provides colorimetric and photometric properties together with, as a
guideline, references from colour order systems.
1 Scope
This document prescribes safety signs for the purposes of accident prevention, fire protection, health
hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical
symbols is according to ISO 3864-3.
This document is applicable to all locations where safety issues related to people need to be addressed.
However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic
and, in general, to those sectors subje
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.