EN 13083:2008+A1:2013

Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading.
This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no subclassification as toxic or corrosive.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-Kupplung für Untenbefüllung und -entladung

Diese Europäische Norm behandelt von außen zu betätigende und selbsttätige VK-Kupplungen für Untenbefüllung und -entladung.
In dieser Europäischen Norm sind die Leistungsanforderungen und die wesentlichen Maße der VK-Kupplung für Untenbefüllung und -entladung festgelegt. Weiterhin sind die Prüfungen festgelegt, mit denen nachgewiesen werden kann, ob die Ausrüstung den Anforderungen dieser Europäischen Norm entspricht. Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 des ADR [2] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff) und die nicht als giftig oder ätzend eingestuft sind.

Citernes de transport de matières dangereuses - Équipement de service pour citernes - Adaptateur pour le chargement et le déchargement par le bas

La présente Norme européenne traite des adaptateurs actionnés de l’extérieur et automatiques destinés aux opérations de chargement et de déchargement par le bas.
Elle spécifie les performances requises et les dimensions essentielles des adaptateurs pour le chargement et le déchargement par le bas. Elle spécifie également les essais à réaliser pour vérifier la conformité des équipements à la présente Norme européenne. Les équipements spécifiés par la présente norme conviennent à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR [2] dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence), et qui n’appartiennent à aucune sous-classification des produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Priključek za polnjenje in praznjenje s spodnje strani

Ta evropski standard zajema zunanje aktivirane in samoaktivirane priključke za polnjenje in praznjenje s spodnje strani. Ta evropski standard določa zahteve za učinkovitost in kritične mere priključka za polnjenje in praznjenje s spodnje strani. Določa tudi preskuse, potrebne za preverjanje skladnosti opreme s tem evropskim standardom. Oprema, ki jo določa ta standard, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR [2], katerih parni tlak ne presega 110 kPa pri 50 °C, ter z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.

General Information

• Status: Published
• Publication Date: 11-Jun-2013
• ICS: 13.300 - Protection against dangerous goods
• ICS: 23.020.20 - Vessels and containers mounted on vehicles
• ICS: 23.040.60 - Flanges, couplings and joints
• Technical Committee: CEN/TC 296 - Tanks for transport of dangerous goods
• Drafting Committee: CEN/TC 296/WG 7 - Service equipment (including equipment for vapour recovery, bottom loading, the confinement and handling of petroleum products)
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Dec-2024
• Completion Date: 02-Dec-2024
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 13083:2009+A1:2013 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

Relations

• Merged From: EN 13083:2008 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
• Effective Date: 19-Jan-2023
• Merged From: EN 13083:2008/FprA1 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
• Effective Date: 13-Feb-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-Kupplung für Untenbefüllung und -entladungCiternes de transport de matières dangereuses - Équipement de service pour citernes - Adaptateur pour le chargement et le déchargement par le basTanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and joints23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13083:2008+A1:2013SIST EN 13083:2009+A1:2013en,fr,de01-december-2013SIST EN 13083:2009+A1:2013SLOVENSKI
STANDARDSIST EN 13083:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13083:2008+A1
June 2013 ICS 13.300; 23.020.20; 23.040.60 Supersedes EN 13083:2008
English Version
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
Citernes de transport de matières dangereuses - Équipement de service pour citernes - Adaptateur pour le chargement et le déchargement par le bas
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-Kupplung für Untenbefüllung und -entladung This European Standard was approved by CEN on 13 September 2008 and includes Amendment 1 approved by CEN on 1 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13083:2008+A1:2013: E SIST EN 13083:2009+A1:2013

Adaptor nose . 13 Annex B (informative)
Optional interlock actuator . 14 Annex C (informative)
Allocation of function sectors . 15 Annex D (informative)
4 hole fixing . 17 Bibliography . 18
...