Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)

This document specifies the criteria for developing an in-house mass spectrometry-based method for quantitative analysis of multiple subgroups of organic substances in the scope of physical-chemical analysis of water.
This document supplements ISO/TS 13530 which provides guidance on the initial characterization of the measurement performances, by providing details to select the test matrix and internal standards and criteria for analyte and internal standard recoveries.
This document is not intended as a substitute for the currently applicable analytical standards dedicated to organic compounds but as a resource bringing additional characterization elements.

Wasserbeschaffenheit - Gemeinsam erfassbare Stoffgruppen - Teil 2: Kriterien für die quantitative Bestimmung organischer Stoffe mit einem Multianalyt-Verfahren (ISO 21253-2:2019)

Dieses Dokument legt die Kriterien für die Entwicklung einer massenspektrometrischen laborinternen Methode zur quantitativen Analyse multipler Untergruppen organischer Stoffe im Rahmen der physikalisch-chemischen Untersuchung von Wasser fest.
Dieses Dokument ergänzt ISO/TS 13530, die Anleitung für die erstmalige Charakterisierung der Messleistungen bereitstellt, indem es detaillierte Angaben zur Auswahl der Prüfmatrix, der internen Standards und der Kriterien für die Wiederfindungen von Analyten und internen Standards macht.
Dieses Dokument ist nicht als Ersatz für die aktuell anzuwendenden Normen vorgesehen, die für die Analyse organischer Stoffe bestimmt sind, sondern vielmehr als Hilfsmittel, das weitere Charakterisierungselemente einbringt.

Qualité de l'eau - Méthodes d'analyse de composés multi-classes - Partie 2: Critères pour la détermination quantitative de composés organiques avec une méthode d'analyse de composés multi-classes (ISO 21253-2:2019)

Le présent document spécifie les critères pour le développement en interne d'une méthode fondée sur la spectrométrie de masse pour l'analyse quantitative de multiples sous-groupes de composés organiques dans le cadre d'une analyse physicochimique de l'eau.
Le présent document complète l'ISO/TS 13530 qui fournit des recommandations sur la caractérisation initiale des performances de mesure, en détaillant la sélection de la matrice d'essai et des étalons internes, ainsi que les critères pour la récupération de l'analyte et des étalons internes.
Le présent document n'a pas vocation à se substituer aux normes analytiques dédiées aux composés organiques actuellement en vigueur, mais est destiné à apporter des éléments de caractérisation supplémentaires.

Kakovost vode - Metode za več spojin - 2. del: Merila za kvantitativno določevanje organskih spojin z analizno metodo za več spojin (ISO 21253-2:2019)

Ta dokument določa kritična vprašanja, ki jih je treba obravnavati pri laboratorijski pripravi metode sočasne kvantitativne analize številnih organskih spojin v vodi.

General Information

Status
Published
Publication Date
01-Oct-2019
Withdrawal Date
29-Apr-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
02-Oct-2019
Completion Date
02-Oct-2019

Buy Standard

Standard
EN ISO 21253-2:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2020
Kakovost vode - Metode za več spojin - 2. del: Merila za kvantitativno določevanje
organskih spojin z analizno metodo za več spojin (ISO 21253-2:2019)
Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative
determination of organic substances using a multi-compound class analytical method
(ISO 21253-2:2019)
Wasserbeschaffenheit - Gemeinsam erfassbare Stoffgruppen - Teil 2: Kriterien für die
Beurteilung eines Multianalyt-Verfahrens organischer Stoffe (ISO 21253-2:2019)
Qualité de l'eau - Méthodes d'analyse de composés multi-classes - Partie 2: Critères
pour la détermination quantitative de composés organiques avec une méthode d'analyse
de composés multi-classes (ISO 21253-2:2019)
Ta slovenski standard je istoveten z: EN ISO 21253-2:2019
ICS:
13.060.50 Preiskava vode na kemične Examination of water for
snovi chemical substances
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 21253-2
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 13.060.50
English Version
Water quality - Multi-compound class methods - Part 2:
Criteria for the quantitative determination of organic
substances using a multi-compound class analytical
method (ISO 21253-2:2019)
Qualité de l'eau - Méthodes d'analyse de composés Wasserbeschaffenheit - Gemeinsam erfassbare
multi-classes - Partie 2: Critères pour la détermination Stoffgruppen - Teil 2: Kriterien für die Beurteilung
quantitative de composés organiques avec une eines Multianalyt-Verfahrens organischer Stoffe (ISO
méthode d'analyse de composés multi-classes (ISO 21253-2:2019)
21253-2:2019)
This European Standard was approved by CEN on 9 August 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21253-2:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 21253-2:2019) has been prepared by Technical Committee ISO/TC 147 "Water
quality" in collaboration with Technical Committee CEN/TC 230 “Water analysis” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 21253-2:2019 has been approved by CEN as EN ISO 21253-2:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 21253-2
First edition
2019-08
Water quality — Multi-compound
class methods —
Part 2:
Criteria for the quantitative
determination of organic substances
using a multi-compound class
analytical method
Qualité de l'eau — Méthodes d'analyse de composés multi-classes —
Partie 2: Critères pour la détermination quantitative de composés
organiques avec une méthode d'analyse de composés multi-classes
Reference number
ISO 21253-2:2019(E)
©
ISO 2019
ISO 21253-2:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 21253-2:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Selection of the matrix . 3
6 Sample preservation prior to analysis. 4
7 Internal standards and injection standards . 4
7.1 General . 4
7.2 Selection of standards . 4
8 Calibration . 5
9 Recovery determination . 6
9.1 General . 6
9.2 Quantification by external calibration . 6
9.3 Quantification by internal calibration . 7
10 Limit of quantification (LOQ) . 7
11 Results . 7
11.1 Identification of the compounds . 7
11.2 Quantification . 7
11.3 Measurement uncertainty . 7
12 Quality controls . 7
12.1 General . 7
12.2 Quality control checks on the blank . 8
12.3 Quality control checks on the internal standards . 8
12.4 Quality control checks on the limit of quantification. 8
Annex A (informative) Matrix effect . 9
Bibliography .10
ISO 21253-2:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 147, Water quality, Subcommittee SC 2,
Physical, chemical and biochemical methods.
A list of all parts in the ISO 21253 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

INTERNATIONAL STANDARD ISO 21253-2:2019(E)
Water quality — Multi-compound class methods —
Part 2:
Criteria for the quantitative det
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.