iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12226:2000

(Main)

Geotextiles and geotextile-related products - General tests for evaluation following durability testing

Geotextiles and geotextile-related products - General tests for evaluation following durability testing

This standard specifies test methods for determining the change in specific properties of aged textiles. It is applicable to geotextiles and geotextile-related products. Further reference should be made to CR ISO 12434.

Geotextilien und geotextilverwandte Produkte - Allgemeine Prüfverfahren für die Bewertung nach Beständigkeitsprüfungen

Diese Norm legt Prüfverfahren zur Bestimmung der Änderung der spezifischen Eigenschaften von gealterten Geotextilien fest. Sie ist auf Geotextilien und geotextilverwandte Produkte anwendbar. Weiterhin wird auf CR ISO 13434 verwiesen.

Géotextiles et produits apparentés - Essais généraux pour l'évaluation après les essais de durabilité

La présente norme spécifie les méthodes d'essais permettant de déterminer les modifications de propriétés spécifiques aux géotextiles après vieillissement. Elle s'applique aux géotextiles et aux produits apparentés aux géotextiles. Pour des informations supplémentaires, il convient de se référer au CR ISO 13434.

Geotekstilije in geotekstilijam sorodni izdelki - Splošni preskusi za ocenitev sprememb po preskusu staranja

General Information

Status
Withdrawn
Publication Date
19-Sep-2000
Withdrawal Date
10-Jan-2012
ICS
59.080.70 - Geotextiles
Technical Committee
CEN/TC 189 - Geotextiles and geotextile-related products
Drafting Committee
CEN/TC 189/WG 5 - Durability
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
11-Jan-2012
Completion Date
11-Jan-2012
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 12226:2001 - Geotextiles and geotextile-related products - General tests for evaluation following durability testing

Relations

Replaces
ENV 12226:1996 - Geotextiles and geotextile-related products - General tests for evaluation following durability testing
Effective Date
22-Dec-2008
Replaced By
EN 12226:2012 - Geosynthetics - General tests for evaluation following durability testing
Effective Date
26-Dec-2009

Buy Standard

EN 12226:2001EN 12226:2001
PreviousNext
Standard
EN 12226:2001
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotekstilije in geotekstilijam sorodni izdelki - Splošni preskusi za ocenitev sprememb po preskusu staranjaGeotextilien und geotextilverwandte Produkte - Allgemeine Prüfverfahren für die Bewertung nach BeständigkeitsprüfungenGéotextiles et produits apparentés - Essais généraux pour l'évaluation apres les essais de durabilitéGeot
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9862:2023(Main)
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023)
SIST EN ISO 9862:2024

This document establishes general principles for the sampling of geosynthetics delivered to construction sites, and for the preparation of test specimens from the samples.
The sampling principles are applicable to geosynthetics supplied in rolls or expandable panels.
NOTE            ISO 186 can be used for products supplied in sheet form.
The specimen-preparation principles are applicable to all geosynthetics.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17738:2023(Main)
Geotextiles and geotextile-related products - Damage during installation procedure - Full scale test
SIST EN 17738:2023

This document describes a procedure for producing mechanical damage to geotextiles and geotextile-related products due only to compaction of soil or other materials. The damage is assessed visually and by the loss of tensile strength or other reference tests used to assess the damage caused by this procedure.
The method described is a full-scale test procedure, using a range of fills and compaction methods, and for the derivation of a reduction factor for installation damage for geotextiles and geotextile-related products.
This document excludes geosynthetic barriers and products used in pavements and asphalt overlays.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16416:2023(Main)
Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
SIST EN 16416:2023

This document specifies an index test method that covers laboratory measurement of water flux through saturated clay geosynthetic barrier (GBR-C) specimens using a flexible wall permeameter at constant head.
This test method is applicable to GBR-C products with no additional sealing layers attached (e.g. polymeric or bituminous).
This test method specifies a measurement of flux under a prescribed set of conditions that can be used for manufacturing quality control. The test method can also be used to check conformance.
The flux value determined using this test method is not considered to be representative of the in-service flux of a GBR-C.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12447:2021(Main)
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water
SIST EN 12447:2021

This document specifies a screening test method for determining the resistance of geotextiles and geotextile-related products to hydrolysis by exposing test specimens to water at elevated temperatures, followed by an evaluation of the changes in properties resulting from such exposure. It is intended as a means of establishing a minimum acceptable level of durability.
The tests described in this document do not allow the determination of reduction factors. The tests described in this document are screening tests to show the ability of a product to serve for a certain time. The reference strength and retained strength of products investigated in this document need to be determined in the same way in accordance with EN 12226.
The test is applicable to any geotextile and geotextile-related product susceptible to hydrolysis, in particular polyester and polyamide based materials, and in addition to the yarns from which these geotextiles are made.
This method is not intended for determining the resistance of geotextiles to hydrolysis under highly acid or alkaline conditions.
NOTE   Performance tests to predict long-term lifetime or to compare products of different polymers or of similar polymers with differing structures can be based on the same method but with a wider range of temperatures and durations.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17445:2021(Main)
Geosynthetics - Standard test for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products
SIST-TS CEN/TS 17445:2021

This document specifies an index test method for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products.
The test is normally carried out on specimens conditioned under a specified atmosphere.
The test is applicable to most geosynthetics, but is especially suited to geosynthetic erosion control products.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25619-1:2021(Main)
Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2021)
SIST EN ISO 25619-1:2021

This document specifies index test methods for determining the compressive creep properties of geosynthetic products. The test specimens are subjected either to normal compressive loading or to a combination of normal compressive loading and shear loading.
The test method with a normal load only (see Clause 5) is the standard method.
The test method in which combined normal and shear loads are applied (see Clause 6) is intended for products that are sensitive to shear failure, i.e. which have a columnar or cuspated structure.
The tests are carried out on dry specimens or on specimens immersed in water. The test is intended to be carried out with the specimen immersed in water when any part of the geosynthetic product contains a hydrophilic polymer.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12225:2020(Main)
Geosynthetics - Method for determining the microbiological resistance by a soil burial test
SIST EN 12225:2021

This document specifies a method for the determination of the microbiological resistance of geosynthetics including those of natural fibres and biodegradable polymers by a soil burial test.
NOTE   Experience and exhumation of geosynthetics which had performed successfully, in some cases for more than two decades, indicate that geosynthetics made out of synthetic materials are generally resistant against microbial initiated decay. It can therefore be expected that most of these products commercially available at the present time will pass the soil burial test successfully and it is probably not necessary to submit them all to this test independent of their function. However, if the requirements for appropriate functioning of the geosynthetics demand proof of microbiological resistance or if they are manufactured from newly developed polymers whose resistance is in any doubt, the soil burial test can provide additional information.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12958-2:2020(Main)
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test (ISO 12958-2:2020)
SIST EN ISO 12958-2:2021

This document specifies a method for determining the constant-head water flow capacity within the plane of a geotextile or geotextile-related product, using boundary materials and test conditions of interest. A standard series of test conditions are proposed, involving soil confinement, low hydraulic gradients, seating times and an array of normal loads.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12958-1:2020(Main)
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test (ISO 12958-1:2020)
SIST EN ISO 12958-1:2021

This document specifies a method for determining the constant-head water flow capacity within the plane of a geotextile or geotextile-related product. This document describes the in-plane water flow index test, only applicable to factory-assembled products. For the in-plane water flow performance test, see ISO 12958-2.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12960:2020(Main)
Geotextiles and geotextile-related products - Screening test methods for determining the resistance to acid and alkaline liquids (ISO 12960:2020)
SIST EN ISO 12960:2020

This document specifies methods for screening the resistance of geotextile and geotextile-related products to liquids while not subjecting them to external mechanical stress.
It is applicable to all geotextiles and geotextile-related products. Method A applies particularly to polyamides and method B to polyesters and polyamides. The test results are intended to be interpreted in the context of site conditions.
This document is intended to be used in conjunction with ISO/TS 13434.
NOTE    This document only considers conditions where the specimens are fully immersed in the liquids. Though outside the scope of this document, the test conditions can be modified to accommodate particular applications, e.g. gaseous media. This document does not preclude use for test specimens that are pre-treated by some method, e.g. by weathering, aqueous extraction conditions or installation damage.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day