EN ISO 14555:2006

Welding - Arc stud welding of metallic materials (ISO 14555:2006)

ISO 14555:2006 covers arc stud welding of metallic materials subject to static and dynamic loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.
ISO 14555:2006 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality.
ISO 14555:2006 has been prepared in a comprehensive manner, with a view to its being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction.

Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO 14555:2006)

Diese Internationale Norm umfasst das Lichtbogenbolzenschweißen von metallischen Werkstoffen unter ruhender und nicht ruhender Belastung. Sie legt die besonderen Anforderungen beim Bolzenschweißen in Bezug auf das schweißtechnische Fachwissen, die Qualitätsanforderungen, die Schweißanweisung, die Schweißverfahrensprüfung, die Bedienerprüfung und die Prüfung von Fertigungsschweißungen fest.
Diese Internationale Norm ist anzuwenden, wenn der Nachweis des Herstellers zur Erzeugung von geschweißten Konstruktionen einer bestimmten Qualität verlangt wird.
ANMERKUNG      Allgemeine Qualitätsanforderungen für Schmelzschweißungen an metallischen Werkstoffen sind in ISO 3834-1, ISO 3834-2, ISO 3834-3, ISO 3834-4 und ISO 3834-5 festgelegt.
Diese Internationale Norm ist als umfassendes Bezugsdokument für Verträge erarbeitet worden. Die gestellten Anforderungen können vollständig oder teilweise, sofern sie für die betreffende Konstruktion nicht relevant sind, übernommen werden (siehe Anhang B).

Soudage - Soudage à l'arc des goujons sur les matériaux métalliques (ISO 14555:2006)

L'ISO 14555:2006 couvre le soudage à l'arc des goujons en matériau métallique soumis à des chargements statiques et dynamiques. Elle spécifie les exigences particulières au soudage des goujons qui se rapportent aux connaissances en soudage, aux exigences de qualité, au descriptif de mode opératoire de soudage, à la qualification du descriptif de mode opératoire de soudage, aux épreuves de qualification des opérateurs et au contrôle des soudures de production.
L'ISO 14555:2006 est appropriée lorsqu'il est exigé de démontrer la capacité d'un fabricant à produire des fabrications soudées possédant une qualité spécifiée.
L'ISO 14555:2006 a été préparée dans un esprit d'exhaustivité pour lui permettre d'être utilisée comme référence dans les contrats. Les exigences qui sont données peuvent être adoptées en intégralité ou bien certaines d'entre elles peuvent être supprimées si elles ne sont pas pertinentes par rapport à la construction concernée.

Varjenje - Obločno varjenje čepov iz kovinskih materialov (ISO 14555:2006)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2006
• Withdrawal Date: 22-Apr-2014
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 11 - Stud welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Apr-2014
• Completion Date: 23-Apr-2014
• Ref Project: SIST EN ISO 14555:2007 - Welding - Arc stud welding of metallic materials (ISO 14555:2006)

Relations

• Replaces: EN ISO 14555:1998 - Welding - Arc stud welding of metallic materials (ISO 14555:1998)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 14555:2014 - Welding - Arc stud welding of metallic materials (ISO 14555:2014, Corrected version 2014-06-01)
• Effective Date: 11-Dec-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Welding - Arc stud welding of metallic materials (ISO 14555:2006)Soudage - Soudage a l'arc des goujons sur les matériaux métalliques (ISO 14555:2006)Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO 14555:2006)Ta slovenski standard je istoveten z:EN ISO 14555:2006SIST EN ISO 14555:2007en25.160.10Varilni postopki in varjenjeWelding processesICS:SIST EN ISO 14555:19991DGRPHãþDSLOVENSKI
STANDARDSIST EN ISO 14555:200701-marec-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14555October 2006ICS 25.160.10Supersedes EN ISO 14555:1998
English VersionWelding - Arc stud welding of metallic materials (ISO14555:2006)Soudage - Soudage à l'arc des goujons sur les matériauxmétalliques (ISO 14555:2006)Schweißen - Lichtbogenbolzenschweißen von metallischenWerkstoffen (ISO 14555:2006)This European Standard was approved by CEN on 22 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14555:2006: E

Foreword
This document (EN ISO 14555:2006) has been prepared by Technical Committee ISO/TC 44 "Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 "Welding", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by April 2007.
This document supersedes EN ISO 14555:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 14555:2006 has been approved by CEN as EN ISO 14555:2006 without any modifications.

Reference numberISO 14555:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO14555Second edition2006-10-01Welding — Arc stud welding of metallic materials Soudage — Soudage à l'arc des goujons sur les matériaux métalliques

ISO 14555:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 14555:2006(E) © ISO 2006 – All rights reserved iiiContents Page Foreword.v Introduction.vi 1 Scope.1 2 Normative references.1 3 Terms and definitions.2 4 Symbols and abbreviated terms.4 4.1 Symbols.4 4.2 Abbreviated terms.4 5 Technical review.5 6 Welding personnel.5 6.1 Stud-welding operators.5 6.2 Welding coordination.5 7 Equipment.6 7.1 Production equipment.6 7.2 Description of the equipment.6 7.3 Maintenance.6 8 Production planning.7 9 Welding procedure specification (WPS).7 9.1 General.7 9.2 Information related to the manufacturer.7 9.3 Information related to the parent material.7 9.4 Welding process.7 9.5 Joint.8 9.6 Studs.8 9.7 Auxiliaries.8 9.8 Power source.9 9.9 Movable fixtures.9 9.10 Welding variables.9 9.11 Thermal conditions.10 9.12 Post-weld heat-treatment.10 9.13 Non-thermal treatment after welding.10 10 Welding procedure qualification.10 10.1 Principles.10 10.2 Welding procedure tests.10 10.3 Pre-production tests.14 10.4 Previous experience.14 10.5 Welding procedure qualification record (WPQR).15 11 Examination and testing.15 11.1 General.15 11.2 Visual examination.15 11.3 Bend testing.15 11.4 Tensile testing.18 11.5 Torque test.21 11.6 Macro examination.22 11.7 Radiographic examination.22

ISO 14555:2006(E) iv © ISO 2006 – All rights reserved 12 Acceptance criteria.22 12.1 General.22 12.2 Acceptance criteria for visual examination.23 12.3 Acceptance criteria for bend testing.23 12.4 Acceptance criteria for tensile testing.23 12.5 Acceptance criteria for torque testing.23 12.6 Acceptance criteria for macro examination.23 12.7 Acceptance criteria for radiographic examination.23 12.8 Acceptance criteria for additional tests.24 13 Workmanship.24 14 Process control.24 14.1 General.24 14.2 Production test.25 14.3 Simplified production test.25 14.4 Re-testing for production test or simplified production test.26 14.5 Production surveillance.26 14.6 Production surveillance record.26 14.7 Non-conformance and corrective actions.26 14.8 Calibration of the measuring and testing equipment.27 Annex A (informative)
Processing of stud welding.28 Annex B (normative)
Quality requirements for stud welding.48 Annex C (informative)
Manufacturer's welding procedure specification (WPS).
...