prEN 16683
(Main)Railway applications - Call for aid and communication device - Requirements for heavy rail vehicles
Railway applications - Call for aid and communication device - Requirements for heavy rail vehicles
This document covers heavy rail rolling stock.
This document does not cover urban rail rolling stock.
NOTE 1 EN 17355 covers communication device requirements for urban rail rolling stock.
This document specifies:
— the functional requirements for a call for aid system and communication device system;
— the dynamic analysis of the call for aid system.
NOTE 2 “Dynamic analysis” is understood here as a sequence of actions.
NOTE 3 In a formation of vehicles where one complies with this document with one that does not, it is possible that the call for aid system is not fully functional.
NOTE 4 The call for aid system function is separate from the Passenger Alarm System (PAS) function, which is provided to deal with emergency situations. The PAS is described in EN 16334-1:2014+A1:2022.
NOTE 5 The communication device system can be different from the PAS, but it can share some or all parts of the PAS to achieve its functionalities.
NOTE 6 The PAS is regarded as a safety relevant system whereas the CFA system and communication device system are non-safety relevant aids to passengers.
Bahnanwendungen - Hilferufvorrichtung und Kommunikationseinrichtung für Fahrgäste - Anforderungen für Vollbahnfahrzeuge
Dieses Dokument behandelt Vollbahn-Schienenfahrzeuge.
Dieses Dokument deckt keine Schienenfahrzeuge städtischer Schienenbahnen ab.
ANMERKUNG 1 EN 17355 deckt Anforderungen an Kommunikationseinrichtungen für Rollmaterial städtischer Schienenbahnen ab.
Dieses Dokument legt Folgendes fest:
- die funktionalen Anforderungen an eine Hilferufvorrichtung und an eine Kommunikationseinrichtung;
- die dynamische Analyse eines Hilferufsystems.
ANMERKUNG 2 In einem Verband von Fahrzeugen, in dem ein Fahrzeug diesem Dokument entspricht und ein anderes nicht, ist es möglich, dass das Hilferufsystem nicht voll funktionsfähig ist.
ANMERKUNG 3 Die Hilferuffunktion wird getrennt vom Fahrgastalarmsystem (PAS) betrachtet, welches für Notfälle konzipiert wurde. Das PAS ist in EN 16334-1 beschrieben.
ANMERKUNG 4 Die Kommunikationseinrichtung kann vom PAS getrennt sein, kann jedoch einige oder alle Bestandteile des PAS nutzen, um ihre Funktionalität zu erreichen.
ANMERKUNG 5 Das PAS wird als sicherheitsrelevantes System betrachtet, während es sich beim Hilferufsystem (CFA) und bei der Kommunikationseinrichtung um nicht sicherheitsrelevante Hilfsmittel für Fahrgäste handelt.
Applications ferroviaires - Dispositifs d'appel à l'aide et de communication à disposition des passagers - Prescriptions pour véhicules ferroviaires lourds
Le présent document couvre le matériel roulant ferroviaire lourd.
Le présent document ne couvre pas le matériel roulant ferroviaire urbain.
NOTE 1 L'EN 17355 couvre les exigences relatives aux dispositifs de communication pour le matériel roulant ferroviaire urbain.
Le présent document spécifie :
- les exigences fonctionnelles relatives à un dispositif d’appel à l’aide et à un dispositif de communication ;
- l'analyse dynamique du système d’appel à l’aide.
NOTE 2 Dans une formation de véhicules dont l'un est conforme au présent document et un autre non, il est possible que la fonction d'appel à l'aide ne soit pas pleinement opérationnelle.
NOTE 3 La fonction d’appel à l’aide est bien distincte du système d'alarme passager (PAS) qui est fourni pour gérer des situations d'urgence. Le PAS est décrit dans l'EN 16334-1.
NOTE 4 Le dispositif de communication peut être différent du PAS, mais il peut partager certaines ou toutes les parties du PAS pour réaliser ses fonctionnalités.
NOTE 5 Le PAS est considéré comme un système de sécurité alors que le CFA et le dispositif de communication sont des aides non-critiques pour les passagers.
Železniške naprave - Naprava za klic v sili in naprave za sporočanje, namenjene potnikom - Zahteve za težka železniška vozila
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2023
Železniške naprave - Naprava za klic v sili in naprave za sporočanje, namenjene
potnikom - Zahteve za težka železniška vozila
Railway applications - Call for aid and communication device - Requirements for heavy
rail vehicles
Bahnanwendungen - Hilferufvorrichtung und Kommunikationseinrichtung für Fahrgäste -
Anforderungen für Vollbahnfahrzeuge
Applications ferroviaires - Dispositifs d'appel à l'aide et de communication à disposition
des passagers - Prescriptions pour véhicules ferroviaires lourds
Ta slovenski standard je istoveten z: prEN 16683
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 13.320; 45.060.01 Will supersede EN 16683:2015
English Version
Railway applications - Call for aid and communication
device - Requirements for heavy rail vehicles
Applications ferroviaires - Dispositifs d'appel à l'aide et Bahnanwendungen - Hilferufvorrichtung und
de communication à disposition des passagers - Kommunikationseinrichtung für Fahrgäste -
Prescriptions pour véhicules ferroviaires lourds Anforderungen für Vollbahnfahrzeuge
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16683:2023 E
worldwide for CEN national Members.
Contents Page
EUROPEAN FOREWORD . 4
1 SCOPE . 5
2 NORMATIVE REFERENCES . 5
3 TERMS, DEFINITIONS AND ABBREVIATIONS . 5
3.1 Terms and definitions . 6
3.2 Abbreviations . 7
4 CFA . 7
4.1 CFA elements overview. 7
4.2 CFA general requirements . 8
4.3 Basic CFA . 9
4.3.1 Minimum requirements of the basic CFA . 9
4.3.2 Local basic CFA passenger interface . 10
4.4 CFA isolation . 10
4.5 CFAD operation requirements . 10
4.5.1 Actions and feedback at the CFAD location. 10
4.5.2 Actions at train level .1 0
4.6 CFAD operation in sleeping coach . 11
4.7 Locating operated CFAD . 12
4.8 Acknowledgements and feedback . 12
4.8.1 SOO acknowledgement and feedback recommendations . 12
4.8.2 DOO acknowledgement requirements . 12
4.8.3 DOO feedback to passengers . 13
4.9 CFAD reset . 13
4.10 Dynamic analysis of the CFA function . 13
4.11 CFAD passenger interface design requirements . 13
5 COMMUNICATION DEVICE . 14
5.1 Introduction . 14
5.2 General requirements . 14
5.3 Communication device interface design requirements . 15
5.4 Communication within a sleeping coach . 15
6 COMMUNICATION PRIORITY REQUIREMENTS . 15
ANNEX A (INFORMATIVE) CFA TRAIN BROADCAST AUDIBLE SIGNAL TONE FOR
CROSS BORDER TRAINS . 17
ANNEX B (INFORMATIVE) FLOWCHART OF CFA OPERATION . 18
ANNEX C (INFORMATIVE) COMMUNICATION DEVICE PASSENGER INTERFACE . 21
C.1 LABEL. 21
C.2 COMMUNICATION DEVICE WHERE NO CFAD IS PROVIDED . 21
C.3 COMMUNICATION DEVICE CLOSE TO A CFAD . 22
ANNEX ZA (INFORMATIVE) RELATIONSHIP BETWEEN THIS EUROPEAN STANDARD
AND THE ESSENTIAL REQUIREMENTS OF EU DIRECTIVE (EU) 2016/797 AIMED TO
BE COVERED . 23
BIBLIOGRAPHY . 26
European foreword
This document (prEN 16683:2023) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16683:2015.
In comparison with the previous edition EN 16683:2015, the following technical modifications
have been made:
— the scope has been updated and explicitly does not cover urban rail;
— the normative references have been updated;
— Clause 3 (Terms, definitions and abbreviations) has been updated;
— the CFA (Clause 4) description and requirements have been reviewed to remove ambiguities;
— a new subclause 4.11 on CFAD passenger interface design requirements was added;
— subclause 5.5 is now Clause 6 and has been slightly rephrased;
— Annex C has been rewritten;
— Annex ZA has been updated.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an
integral part of this document.
1 Scope
This document covers heavy rail rolling stock.
This document does not cover urban rail rolling stock.
NOTE 1 EN 17355 covers communication device requirements for urban rail rolling stock.
This document specifies:
— the functional requirements for a Call For Aid and Communication device;
— the dynamic analysis of the Call For Aid system.
NOTE 2 In a formation of vehicles where one complies with this document with one that does not, it is
possible that the call for aid is not fully functional.
NOTE 3 The Call For Aid function is separate from the Passenger Alarm System (PAS), which is provided
to deal with emergency situations. The PAS is described in EN 16334-1.
NOTE 4 The communication device can be different from the PAS, but it can share some or all parts of
the PAS to achieve its functionalities.
NOTE 5 The PAS is regarded as a safety relevant system whereas the CFA and communication device
are non-safety relevant aids to passengers.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
prEN 16584-1:2024, Railway applications — Design for PRM use — General requirements — Part
1: Contrast
prEN 16584-2:2024, Railway applications — Design for PRM use — General requirements — Part
2: Information
prEN 16584-3:2024, Railway applications — Design for PRM use — General requirements — Part
3: Optical and friction characteristics
prEN 16585-1:2024, Railway applications — Design for PRM use — Equipment and components
onboard rolling stock - Part 1: Toilets
prEN 16585-2:2024, Railway applications — Design for PRM use — Equipment and components on
board rolling stock - Part 2: Elements for sitting, standing and moving
prEN 16585-3:2024, Railway applications — Design for PRM use — Equipment and components on
board rolling stock - Part 3: Clearways and internal doors
prEN 17343:2023, Railway applications — General terms and definitions
3 Terms, definitions and abbreviations
For the purposes of this document, the following terms, definitions and abbreviations and the
ones in prEN 17343:2023 apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1 Terms and definitions
3.1.1
authorized person
operational people authorized to deal with the situation following CFAD or communication device
operation
Note 1 to entry: An authorized person could be, for example, either staff on the train or at a call centre as
defined by operating rules
3.1.2
call for aid
CFA
system used to inform an authorized person or the driver of a request for individual help
Note 1 to entry: The TSI PRM defines CFA location in wheelchair accessible areas
3.1.3
call for aid device
CFAD
device used to trigger the CFA by a PRM, or any other passenger, which does not necessarily
include communication functions
3.1.4
CFAD operated
status of the CFAD (for example a push button) when its passenger interface is manipulated in
order to change its status and send information to the CFA system
3.1.5
communication device
device used to enable the passengers to speak to authorized persons
3.1.6
communication device interface
equipment used by the passenger to speak to authorized persons
3.1.7
driver only operation
DOO
train without authorized persons on board, except the driver
3.1.8
public address
PA
system used by authorized persons to broadcast to the passenger areas
Note 1 to entry: This is also known as audible communication sy
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.