EN 13880-10:2003

Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

This European Standard describes a method for determining the adhesion and cohesion characteristics of hot applied joint sealant specimens following continuous extension and compression bond testing.

Heiß verarbeitbare Fugenmassen - Teil 10: Prüfverfahren zur Bestimmung des Dehn- und Haftvermögens bei kontinuierlicher Dehnung und Stauchung

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung des Adhäsions- und Kohäsionsverhaltens von Probekörpern heiß verarbeitbarer Fugenmassen durch die Prüfung des Dehn- und Haftvermögens bei kon-tinuierlicher Dehnung und Stauchung.

Produits de scellement de joints appliqués à chaud - Partie 10: Méthode d'essai pour la détermination de l'adhésion et de la cohésion après traction et compression répétée

Cette Norme européenne décrit une méthode pour la détermination des caractéristiques d'adhésion et de cohésion d'éprouvettes de produit de scellement de joints appliqué à chaud après des essais d'adhérence par traction et compression répétée.

Tesnilne mase za stike, ki se vgrajujejo po vročem postopku – 10. del: Preskusna metoda za ugotavljanje adhezije in kohezije po dolgotrajnem raztezanju in stiskanju

General Information

• Status: Withdrawn
• Publication Date: 19-Aug-2003
• Withdrawal Date: 29-May-2018
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 30-May-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13880-10:2004 - Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

Relations

• Replaced By: EN 13880-10:2018 - Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression
• Effective Date: 06-Jun-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWLVNDQMXHeiß verarbeitbare Fugenmassen - Teil 10: Prüfverfahren zur Bestimmung des Dehn- und Haftvermögens bei kontinuierlicher Dehnung und StauchungProduits de scellement de joints appliqués a chaud - Partie 10: Méthode d'essai pour la détermination de l'adhésion et de la cohésion apres traction et compression répétéeHot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-10:2003SIST EN 13880-10:2004en01-junij-2004SIST EN 13880-10:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-10August 2003ICS 93.080.20English versionHot applied joint sealants - Part 10: Test method for thedetermination of adhesion and cohesion following continuousextension and compressionProduits de scellement de joints appliqués à chaud - Partie10: Méthode d'essai pour la détermination de l'adhésion etde la cohésion après traction et compression répétéeHeiß verarbeitbare Fugenmassen - Teil 10: Prüfverfahrenzur Bestimmung des Dehn- und Haftvermögens beikontinuierlicher Dehnung und StauchungThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-10:2003 ESIST EN 13880-10:2004

Bond testing after fuel immersion.8A.1Principle.8A.2Apparatus.8A.3Preparation and conditioning of test specimens.8A.4Procedure.8A.5Test report.9SIST EN 13880-10:2004
...