EN 13880-12:2003

Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)

This European Standard describes a method for the manufacture of concrete test blocks for joint sealant bond
testing.
The requirements of this European Standard are applicable to concrete test blocks with a maximum aggregate size of 16 mm to 20 mm or with a maximum aggregate size of 4,0 mm.

Heiß verarbeitbare Fugenmassen - Teil 12: Prüfverfahren zur Herstellung von Beton-Grundkörpern für die Bestimmung des Dehn- und Haftvermögens

Diese Europäische Norm beschreibt ein Verfahren zur Herstellung von Beton-Probekörpern für die Prüfung des Haft- und Dehnvermögens von Fugenmassen.
Die Anforderungen dieser Europäischen Norm gelten für Beton-Probekörper mit einer maximalen Korngröße der Gesteinskörnungen von 16 mm bis 20 mm bzw. von 4 mm.

Produits de scellement de joints appliqués à chaud - Partie 12 : Méthode d'essai pour la fabrication de blocs en béton pour l'essai d'adhérence (composition)

Cette Norme européenne décrit une méthode pour la fabrication de blocs en béton pour l'essai d'adhérence des produits de scellement de joints.
Les exigences de cette Norme européenne s'appliquent aux blocs d'essai en béton avec une dimension de gravillons maximale de 16 mm à 20 mm ou une dimension de granulat maximale de 4,0 mm.

Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)

General Information

• Status: Published
• Publication Date: 19-Aug-2003
• Withdrawal Date: 30-Mar-2005
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 17-Dec-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13880-12:2004 - Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)Heiß verarbeitbare Fugenmassen - Teil 12: Prüfverfahren zur Herstellung von Beton-Grundkörpern für die Bestimmung des Dehn- und HaftvermögensProduits de scellement de joints appliqués a chaud - Partie 12 : Méthode d'essai pour la fabrication de blocs en béton pour l'essai d'adhérence (composition)Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-12:2003SIST EN 13880-12:2004en01-junij-2004SIST EN 13880-12:2004SLOVENSKI
STANDARD



SIST EN 13880-12:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-12August 2003ICS 93.080.20English versionHot applied joint sealants - Part 12: Test method for themanufacture of concrete test blocks for bond testing (recipemethods)Produits de scellement de joints appliqués à chaud - Partie12: Méthode d'essai pour la fabrication de blocs en bétonpour l'essai d'adhérence (recette)Heiß verarbeitbare Fugenmassen - Teil 12: Prüfverfahrenzur Herstellung von Beton-Grundkörpern für dieBestimmung des Dehn- und HaftvermögensThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-12:2003 ESIST EN 13880-12:2004



EN 13880-12:2003 (E)2ContentspageForeword.31Scope.32Normative references.43Principle.44Apparatus.45Materials.55.1Coarse aggregate.55.2Fine aggregate.55.3Cement.55.4Mixing water.55.5Admixtures.56Concrete test block mixes.66.1General.66.2Concrete test blocks with coarse aggregate.
...