Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998)

This document describes a procedure for the control of film processing systems.

Zerstörungsfreie Prüfung - Industrielle Filme für die Durchstrahlungsprüfung - Teil 2: Kontrolle der Filmverarbeitung mit Hilfe von Referenzwerten (ISO 11699-2:1998)

Dieser Teil der ISO 11699 beschreibt die Vorgehensweise bei der Kontrolle von Filmverarbeitungssystemen.

Essais non destructifs - Films utilisés en radiographie industrielle - Partie 2: Contrôle du traitement des films au moyen de valeurs de référence (ISO 11699-2:1998)

Neporušitveno preskušanje - Film za industrijsko radiografijo - 2. del: Kontrola razvijanja filmov s pomočjo referenčnih vrednosti (ISO 11699-2:2011)

Ta del standarda ISO 11699 opisuje postopek za kontrolo sistemov za razvijanje filmov.

General Information

Status
Withdrawn
Publication Date
30-Jan-2012
Withdrawal Date
11-Sep-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Sep-2018

Relations

Buy Standard

Standard
EN ISO 11699-2:2012
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11699-2:2012
01-april-2012
1DGRPHãþD
SIST EN 584-2:1998
1HSRUXãLWYHQRSUHVNXãDQMH)LOP]DLQGXVWULMVNRUDGLRJUDILMRGHO.RQWUROD
UD]YLMDQMDILOPRYVSRPRþMRUHIHUHQþQLKYUHGQRVWL ,62

Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing

by means of reference values (ISO 11699-2:2011)

Zerstörungsfreie Prüfung - Industrielle Filme für die Durchstrahlungsprüfung - Teil 2:

Kontrolle der Filmverarbeitung mit Hilfe von Referenzwerten (ISO 11699-2:2011)

Essais non destructifs - Films utilisés en radiographie industrielle - Partie 2: Contrôle du

traitement des films au moyen de valeurs de référence (ISO 11699-2:2011)
Ta slovenski standard je istoveten z: EN ISO 11699-2:2011
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
37.040.25 Radiografski filmi Radiographic films
SIST EN ISO 11699-2:2012 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11699-2:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 11699-2:2012
EUROPEAN STANDARD
EN ISO 11699-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2011
ICS 37.040.25 Supersedes EN 584-2:1996
English Version
Non-destructive testing - Industrial radiographic films - Part 2:
Control of film processing by means of reference values (ISO
11699-2:1998)

Essais non destructifs - Films utilisés en radiographie Zerstörungsfreie Prüfung - Industrielle Filme für die

industrielle - Partie 2: Contrôle du traitement des films au Durchstrahlungsprüfung - Teil 2: Kontrolle der

moyen de valeurs de référence (ISO 11699-2:1998) Filmverarbeitung mit Hilfe von Referenzwerten (ISO 11699-

2:1998)
This European Standard was approved by CEN on 25 September 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11699-2:2011: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11699-2:2012
EN ISO 11699-2:2011 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 11699-2:2012
EN ISO 11699-2:2011 (E)
Foreword

The text of ISO 11699-2:1998 has been prepared by Technical Committee ISO/TC 135 “Non-destructive

testing” of the International Organization for Standardization (ISO) and has been taken over as EN ISO

11699-2:2011 by Technical Committee CEN/TC 138 “Non-destructive testing” the secretariat of which is held

by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the

latest by April 2012.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 584-2:1996.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
Endorsement notice

The text of ISO 11699-2:1998 has been approved by CEN as a EN ISO 11699-2:2011 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 11699-2:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 11699-2:2012
INTERNATIONAL ISO
STANDARD 11699-2
First edition
1998-07-01
Non-destructive testing — Industrial
radiographic films —
Part 2:
Control of film processing by means of
reference values
Essais non destructifs — Films utilisés en radiographie industrielle —
Partie 2: Contrôle du traitement des films au moyen de valeurs de référence
Reference number
ISO 11699-2:1998(E)
---------------------- Page: 7 ----------------------
SIST EN ISO 11699-2:2012
ISO 11699-2:1998(E)
Contents Page

Scope ................................................................................................. 1

2 Normative reference .......................................................................... 1

3 Definitions .......................................................................................... 1

4 Manufacturing of pre-exposed film strips for control

of the processing system .................................................................. 1

5 User verification of compliance with a classified film system ........... 5

6 Interpretation of results ...................................................................... 6

7 Checking intervals ............................................................................. 7

Test report ......................................................................................... 7

9 Compliance with film system classifcation ........................................ 7

Annex A (normative) Method for processing control .............................. 8

© ISO 1998

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced

or utilized in any form or by any means, electronic or mechanical, including photocopying and

microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
---------------------- Page: 8 ----------------------
SIST EN ISO 11699-2:2012
ISO ISO 11699-2:1998(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation

of national standards bodies (ISO member bodies). The work of preparing
International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that
committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council. They are approved in accordance with ISO
procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 11699-2 was prepared by Technical Committee
ISO/TC 135, Non-destructive testing, Subcommittee SC 5, Radiation methods.

ISO 11699 consists of the following parts under the general title Non-destructive

testing — Industrial radiographic films:
— Part 1: Classification of film systems for industrial radiography
— Part 2: Control of film processing by means of reference values
Annex A forms an integral part of this part of ISO 11699.
iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11699-2:2012
ISO 11699-2:1998(E) ISO
Introduction
This part of ISO 11699 describes a procedure for the control of the film
processing systems by users by processing calibrated pre-exposed strips.
The strips are exposed to X-rays and are accompanied by a certificate from the
film strip manufacturer.
The user processes the pre-exposed strips in his system and records the results.
In this part of ISO 11699, clause 4 shows the responsibility of the film strip
manufacturer. The user is responsible for clauses 5 to 8, which show compliance
with the chosen system classification.
---------------------- Page: 10 ----------------------
SIST EN ISO 11699-2:2012
INTERNATIONAL STANDARD ISO ISO 11699-2:1998(E)
Non-destructive testing — Industrial radiographic films —
Part 2:
Control of film processing by means of reference values
1 Scope

This part of ISO 11699 describes a procedure for the control of film processing systems.

2 Normative reference

The following standard contains provisions which, through reference in this text, constitute provisions of this part of

ISO 11699. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to

agreements based on this part of ISO 11699 are encouraged to investigate the possibility of applying the most recent

edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International

Standards.

ISO 11699-1:1998, Non-destructive testing — Industrial radiographic films — Part 1: Classification of film systems for

industrial radiography.
3 Definitions
For the purposes of this part of ISO 11699, the following definitions apply.

3.1 film system: Combination of film and film processing which is carried ou in accorcance with the instructions of film

manufacturer and/or the manufacturer of the processing chemicals [ISO 11699-1].

3.2 film system class: Film system classification according to the limiting values given in table 1 of ISO 11699-1:1998.

Piece of film material on which a step wedge can be exposed.
3.3 film strip:

3.4 pre-exposed film strip: Film strip that is pre-exposed so as to present at least ten different densities after processing.

3.5 net density: Optical density without base and fog density.
4 Manufacturing of pre-exposed film strips for control of the processing system
4.1 Size

The film strips shall have a minimum exposed area of 15 mm · 100 mm. The pre-exposed film strips contain a step wedge

for density measurements and a blank area for base plus fog density and long term storage time test.

---------------------- Page: 11 ----------------------
SIST EN ISO 11699-2:2012
ISO
ISO 11699-2:1998(E)
4.2 Selection of film strip type

The selected type of film used for the film strips shall have a response to processing which is representative for the set of

films which are classified according to I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.