iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16602-10-09:2014

(Main)

Space product assurance - Nonconformance control system

Space product assurance - Nonconformance control system

This Standard defines the requirements for the control of nonconformances.
This Standard applies to all deliverable products and supplies, at all levels, which fail to conform to project requirements.
This Standard is applicable throughout the whole project lifecycle as defined in ECSS-M-ST-10.
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

Raumfahrtproduktsicherung - Nichtkonformitäts-/Abweichungs-Kontrollsystem

Assurance produit des projets spatiaux - Instruction et traitement des anomalies

La présente norme définit les exigences relatives au contrôle des anomalies.
La présente norme s'applique à tous les produits et fournitures livrables non conformes aux exigences du projet, quel que soit leur niveau.
La présente norme s’applique tout au long du cycle de vie du projet, comme défini dans le standard ECSS-M-ST-10.
La présente norme peut être adaptée aux caractéristiques et contraintes spécifiques à un projet spatial, selon le standard ECSS-S-ST-00.

Zagotavljanje varnih proizvodov v vesoljski tehniki - Sistem kontrole neskladnosti

Standard EN 16602-10-09 določa zahteve za kontrolo neskladnosti. Ta standard velja za vse dobavljive izdelke in materiale na vseh ravneh, ki niso v skladu s projektnimi zahtevami. Ta standard se uporablja za celoten življenjski cikel projekta, kot je opredeljeno v ECSS-M-ST-10. Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.

General Information

Status
Withdrawn
Publication Date
09-Sep-2014
Withdrawal Date
17-Mar-2020
ICS
49.140 - Space systems and operations
Technical Committee
CEN/CLC/TC 5 - Space
Drafting Committee
CEN/CLC/TC 5 - Space
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Mar-2020
Mandate
M/496 - Mandate addressed to CEN, CENELEC and ETSI to develop standardisation regarding space industry (Phase 3 of the process)
Ref Project
SIST EN 16602-10-09:2014 - Space product assurance - Nonconformance control system

Relations

Replaces
EN 14097:2001 - Space product assurance - Nonconformance control system
Effective Date
08-Jun-2022
Replaced By
EN 16602-10-09:2020 - Space product assurance - Nonconformance control system
Effective Date
24-Mar-2020

Buy Standard

EN 16602-10-09:2014EN 16602-10-09:2014
PreviousNext
Standard
EN 16602-10-09:2014
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16602-10-09:2014
01-november-2014
1DGRPHãþD
SIST EN 14097:2004
Zagotavljanje varnih proizvodov v vesoljski tehniki - Sistem kontrole neskladnosti
Space product assurance - Nonconformance control system
Raumfahrtproduktsicherung - Nichtkonformitäts-/Abweichungs-Kontrollsystem
Assurance produit des projets spatiaux - Système de contrôle des non-conformités
Ta slovenski standard je istoveten z: EN 16602-10-09:2014
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16602-10-09:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16602-10-09:2014

---------------------- Page: 2 ----------------------

SIST EN 16602-10-09:2014


EUROPEAN STANDARD
EN 16602-10-09

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2014
ICS 49.140 Supersedes EN 14097:2001
English version
Space product assurance - Nonconformance control system
Assurance produit des projets spatiaux - Système de Raumfahrtproduktsicherung - Nichtkonformitäts-
contrôle des non-conformités /Abweichungs-Kontrollsystem
This European Standard was approved by CEN on 1 March 2014.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.







CEN-CENELEC Management Centre:
Avenue Marnix 17, B-1000 Brussels
© 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN 16602-10-09:2014 E
worldwide for CEN national Members and for CENELEC
Members.

---------------------- Page: 3 ----------------------

SIST EN 16602-10-09:2014
EN 16602-10-09:2014 (E)
Table of contents
Foreword . 4
1 Scope . 5
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 7
3.1 Terms from other standards . 7
3.2 Terms specific to the present standard . 7
3.3 Abbreviated terms. 8
4 Nonconformance control system principles . 10
4.1 Process and objectives . 10
4.2 Detection and immediate actions . 10
4.3 Nonconformance review board (NRB) . 11
4.3.1 Internal NRB . 11
4.3.2 Customer NRB . 12
4.4 Corrective and preventive actions . 12
4.5 Implementation of actions and nonconformance close-out . 13
4.6 Documentation . 13
5 Nonconformance processing requirements . 14
5.1 Detection and immediate actions . 14
5.2 N
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16603-20-40:2023(Main)
Space engineering - ASIC, FPGA and IP Core engineering
SIST EN 16603-20-40:2024

This activity w ill be the parallel development of EN 16603-20-40 and ECSS-E-ST-20-40C.
The scope shall cover the areas of existing ASIC and FPGA engineering chapter 5 of ECSS-Q-ST-60-02C, but w ith w ider breadth and greater depth, covering engineering requirements of end-to-end development flow s, from specification of requirements to validation of prototypes, of the follow ing monolithic devices for its use in space:
• ASICs (distinguishing digital, analogue and mixed-signal development flow s)
• FPGAs (distinguishing three technology families: SRAM, FLASH and anti-fuse technologies)
• ASIC and FPGA System-on-Chip embedding processor cores w hich have external “softw are programme” dependencies to be addressed during the SoC development, resulting in SW-HW co-design requirements.

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16604-10:2023(Main)
Space sustainability - Space debris mitigation requirements (ISO 24113:2023, modified)
SIST EN 16604-10:2024

This document defines the primary space debris mitigation requirements applicable to all elements of unmanned systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft and any objects released as part of normal operations.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20:2023(Main)
Space engineering - Electrical and electronic
SIST EN 16603-20:2024

Scope remains unchanged.
This Standard establishes the basic rules and general principles applicable to the electrical, electronic, electromagnetic, microwave and engineering processes. It specifies the tasks of these engineering processes and the basic performance and design requirements in each discipline.
It defines the terminology for the activities within these areas.
It defines the specific requirements for electrical subsystems and payloads, deriving from the system engineering requirements laid out in EN 16603-10 (equivalent of ECSS-E-ST-10 "Space engineering - System engineering general requirements".)

  • Standard
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20-08:2023(Main)
Space engineering - Photovoltaic assemblies and components
SIST EN 16603-20-08:2023

This Standard specifies the general requirements for the qualification, procurement, storage and delivery of photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes suitable for space applications.
This standard does not cover the particular qualification requirements for a specific mission.
This Standard primarily applies to qualification approval for photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes, and to the procurement of these items.
This standard is limited to crystaline Silicon and single and multi-junction GaAs solar cells with a thickness of more than 50 m and does not include thin film solar cell technologies and poly-crystaline solar cells.
This Standard does not cover the concentration technology, and especially the requirements related to the optical components of a concentrator (e.g. reflector and lens) and their verification (e.g. collimated light source).
This Standard does not apply to qualification of the solar array subsystem, solar panels, structure and solar array mechanisms.

  • Standard
    230 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-60:2023(Main)
Space product assurance - Electrical, electronic and electromechanical (EEE) components
SIST EN 16602-60:2023

The Scope of the Standard remains unchanged.
This standard defines the requirements for selection, control, procurement and usage of EEE components for space projects.
This standard differentiates between three classes of components through three different sets of standardization requirements (clauses) to be met.
The three classes provide for three levels of trade-off between assurance and risk. The highest assurance and lowest risk is provided by class 1 and the lowest assurance and highest risk by class 3. Procurement costs are typically highest for class 1 and lowest for class 3. Mitigation and other engineering measures may decrease the total cost of ownership differences between the three classes. The project objectives, definition and constraints determine which class or classes of components are appropriate to be utilised within the system and subsystems.
a.   Class 1 components are described in Clause 4.
b.   Class 2 components are described in Clause 5
c.   Class 3 components are described in Clause 6.
The requirements of this document apply to all parties involved at all levels in the integration of EEE components into space segment hardware and launchers.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-40:2023(Main)
Space product assurance - Processing and quality assurance requirements for hard brazing of metallic materials for flight hardware
SIST EN 16602-70-40:2023

2021-04-21: This EN is based on ECSS-Q-ST-70-40C

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-60-13:2023(Main)
Space product assurance - Commercial electrical, electronic and electromechanical (EEE) components
SIST EN 16602-60-13:2023

2021-04-21: This EN is based on ECSS-Q-ST-60-13C Rev.1

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-61:2022(Main)
Space product assurance - High-reliability soldering for surface mount, mixed technology and hand-mounted electrical connections
SIST EN 16602-70-61:2022

This standard defines:
- the basic requirements for the verification and approval of automatic machine w ave soldering for use in spacecraft hardware. The process requirements for w ave soldering of doublesided and multilayer boards are also defined.
- the technical requirements and quality assurance provisions for the manufacture and verification of manuallysoldered, high-reliability electrical connections.
- the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits based on surface mounted device (SMD) and mixed technology.
- the acceptance and rejection criteria for high reliability manufacture of manually-soldered electrical connections intended to w ithstand normal terrestrial conditions and the vibrational g-loads and environment imposed by space flight.
- the proper tools, correct materials, design and w orkmanshipt. Workmanship standards are included to permit discrimination betw een proper and improper work.
SCOPE
This Standard defines the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
The Standard defines w orkmanship requirements, the acceptance and rejection criteria for high-reliability assemblies intended to withstand normal terrestrial conditions and the environment imposed by space flight.
The mounting and supporting of components, terminals and conductors specified in this standard applies only to assemblies designed to continuously operate over the mission w ithin the temperature limits of -55 °C to +85 °C at solder joint level.
Requirements related to printed circuit boards are contained in ECSS-Q-ST-70-60 (equivalent to EN 16602-70-60) and ECSS-Q-ST-70-12 (equivalent to EN 16602-70-12).
This Standard does not cover the qualification and acceptance of the EQM and FM equipment w ith high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
This Standard does not cover verification of thermal properties for component assembly.
This Standard does not cover pressfit connectors.
The qualification and acceptance tests of equipment manufactured in accordance w ith this Standard are covered by ECSS-EST-10-03 (equivalent to EN 16603-10-03).

  • Standard
    253 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-10-03:2022(Main)
Space engineering - Testing
SIST EN 16603-10-03:2022

This standard addresses the requirements for performing verification by testing of space segment elements and space segment equipment on ground prior to launch. The document is applicable for tests performed on qualification models, flight models (tested at acceptance level) and protoflight models.
The standard provides:
• Requirements for test programme and test management,
• Requirements for retesting,
• Requirements for redundancy testing,
• Requirements for environmental tests,
• General requirements for functional and performance tests,
NOTE Specific requirements for functional and performance tests are not part of this standard since they are defined in the specific project documentation.
• Requirements for qualification, acceptance, and protoflight testing including qualification, acceptance, and protofight models’ test margins and duration,
• Requirements for test factors, test condition, test tolerances, and test accuracies,
• General requirements for development tests pertinent to the start of the qualification test programme,
NOTE Development tests are specific and are addressed in various engineering discipline standards.
• Content of the necessary documentation for testing activities (e.g. DRD).
Due to the specific aspects of the follow ing types of test, this Standard does not address:
• Space system testing (i.e. testing above space segment element), in particular the system validation test,
• In-orbit testing,
• Testing of space segment subsystems,
NOTE Tests of space segment subsystems are often limited to functional tests that, in some case, are run on dedicated models. If relevant, qualification tests for space segment subsystems are assumed to be covered in the relevant discipline standards.
Testing of hardware below space segment equipment levels (including assembly, parts, and components),
• Testing of stand-alone software,
NOTE For verification of flight or ground softw are, EN 16603-40 (ECSS-E-ST-40) and EN 16602-80 (ECSS-Q-ST-80) apply.
• Qualification testing of tw o-phase heat transport equipment,
NOTE For qualification testing of tw o-phase heat transport equipment, EN 16603-31-02 (ECSS-E-ST-31-02) applies.
• Tests of launcher segment, subsystem and equipment, and launch facilities,
• Tests of facilities and ground support equipment,
• Tests of ground segment.
This activity will be the update of EN16603-10-03:2014
NOTE: Parallel development of update of EN Standard and the new European TR17603-10-03.

  • Standard
    132 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20-07:2022(Main)
Space engineering - Electromagnetic compatibility
SIST EN 16603-20-07:2022

EMC policy and general system requirements are specified in ECSS-E-ST-20 (equivalent to EN 16603-20).
This ECSS-E-ST-20-07 (equivalent to EN 16603-20-07) Standard addresses detailed system requirements (Clause 4), general test conditions, verification requirements at system level, and test methods at subsystem and equipment level (Clause 5) as w ell as informative limits (Annex A).
Associated to this standard is ECSS-E-ST-20-06 (equivalent to EN 16603-20-06) "Spacecraft charging", w hich addresses charging control and risks arising from environmental and vehicle-induced spacecraft charging w hen ECSS-E-ST-20-07 addresses electromagnetic effects of electrostatic discharges.
Annexes A to C of ECSS-E-ST-20 document EMC activities related to ECSS-E-ST-20-07: the EMC Control Plan (Annex A) defines the approach, methods, procedures, resources, and organization, the Electromagnetic Effects Verification Plan (Annex B) defines and specifies the verification processes, analyses and tests, and the Electromagnetic Effects Verification Report (Annex C) document verification results. The EMEVP and the EMEVR are the vehicles for tailoring this standard.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day