FprEN 14566
(Main)Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods
Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods
This European Standard specifies the characteristics and performance of mechanical fasteners made of steel, including nails, screws and staples, intended to be used for the fixing of gypsum board in accordance with EN 520, gypsum boards with fibrous reinforcement in accordance with EN 15283-1 and EN 15283-2, composite panels according to EN 13950, products from secondary processing in accordance with EN 14190 and suitable ancillary products, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than gypsum board and the gypsum based products referred to above and their associated system components.
Mechanische Befestigungsmittel für Gipsplattensysteme - Begriffe, Anforderungen und Prüfverfahren
Diese Europäische Norm legt die Eigenschaften und Leistung von mechanischen Befestigungsmitteln aus Stahl, einschließlich Nägeln, Schrauben und Klammern fest, die in Bauwerken zur Befestigung von Gipsplatten nach EN 520, faser¬verstärkten Gipsplatten nach EN 15283-1 und EN 15283-2, Gips-Verbundplatten zur Wärme- und Schalldämmung nach EN 13950, Produkten aus der Weiterverarbeitung nach EN 14190 und geeigneten Nebenprodukten, auf Holz oder Metall, wie zutreffend, vorgesehen sind. Die Befestigungsmittel sichern die Platten auf der Unterkonstruktion und ermöglichen so, dass die mit Spachtel oder Putzauftrag versehenen Oberflä¬chen gestrichen oder tapeziert werden können. Sie können auch zum Zusammenbau der Unterkonstruktion und für die Verbindung zwischen Unterkonstruktion und lasttragenden Teilen sowie zur Verbindung von Platten untereinander verwendet werden.
Diese Europäische Norm behandelt die folgenden Produkt-Leistungsmerkmale: Brandverhalten und Biege-festigkeit, die mit den entsprechenden europäischen Prüfverfahren zu bestimmen sind.
Sie legt die Bewertung der Konformität der von dieser Europäischen Norm erfassten Produkte fest.
Diese Europäische Norm behandelt auch die zusätzlichen technischen Eigenschaften, die für die Anwendung und Akzeptanz der Produkte durch die Bauwirtschaft wichtig sind, und enthält die Referenzprüfverfahren für diese Eigen¬schaften.
Diese Europäische Norm gilt nicht für Nägel, Schrauben und Klammern, die für die Verarbeitung anderer Bau-stoffe als die oben erwähnten Gipsplatten oder Produkte auf Gipsbasis und der zugehörigen System-Komponenten verwendet werden.
Fixations mécaniques pour systèmes en plaques de plâtre - Définitions, exigences et méthodes d'essai
This document specifies the characteristics and performance of mechanical fasteners made of steel, including nails, screws and staples, intended to be used for the fixing of gypsum board in accordance with EN 520, gypsum boards with fibrous reinforcement in accordance with EN 15283-1 and EN 15283-2, composite panels according to EN 13950, products from secondary processing in accordance with EN 14190 and suitable ancillary products, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together.
It provides for the assessment and verification of constancy of performance (AVCP) of the product.
This document also covers the other technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This document does not cover nails, screws and staples intended for use with materials other than gypsum board and the gypsum based products referred to above and their associated system components.
Mehanska pritrdilna sredstva za sisteme mavčnih plošč - Definicije, zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14566:2014
01-december-2014
0HKDQVNDSULWUGLOQDVUHGVWYD]DVLVWHPHPDYþQLKSORãþ'HILQLFLMH]DKWHYHLQ
SUHVNXVQHPHWRGH
Mechanical fasteners for gypsum board systems - Definitions, requirements and test
methods
Mechanische Befestigungsmittel für Gipsplattensysteme - Begriffe, Anforderungen und
Prüfverfahren
Fixations mécaniques pour systèmes en plaques de plâtre - Définitions, spécifications et
méthodes d'essai
Ta slovenski standard je istoveten z: prEN 14566
ICS:
21.060.99 Drugi vezni elementi Other fasteners
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
oSIST prEN 14566:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14566:2014
---------------------- Page: 2 ----------------------
oSIST prEN 14566:2014
EUROPEAN STANDARD
DRAFT
prEN 14566
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 21.060.99; 91.100.10 Will supersede EN 14566:2008+A1:2009
English Version
Mechanical fasteners for gypsum board systems - Definitions,
requirements and test methods
Fixations mécaniques pour systèmes en plaques de plâtre - Mechanische Befestigungsmittel für Gipsplattensysteme -
Définitions, spécifications et méthodes d'essai Begriffe, Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 241.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14566:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14566:2014
prEN 14566:2014 (E)
Contents
Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms, definitions, symbols and abbreviated terms .6
3.1 Terms and definitions .6
3.2 Symbols and abbreviated terms .7
4 Requirements .7
4.1 Reaction to fire .7
4.2 Flexural strength (expressed as bending behaviour and breaking torque) .7
4.2.1 Bending behaviour (for nails and staples) .7
4.2.2 Breaking torque (for screws) .7
4.3 Dangerous substances .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.