EN ISO 8611-3:2012

Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011)

ISO 8611-3:2011 specifies the determination of maximum working load for new flat pallets with known payloads in different handling environments.
It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

Paletten für den Gütertransport - Flachpaletten - Teil 3: Maximale Nutzlasten (ISO 8611-3:2011)

Dieser Teil von ISO 8611 legt die Bestimmung der maximalen Nutzlast für neue Flachpaletten mit bekannter Auflast bei unterschiedlichen Handhabungen fest.
Dieser Teil der Norm gilt weder für Paletten mit festen Aufbauten noch für formstabile, selbsttragende Behälter, die mechanisch an den Paletten befestigt werden können und zur Festigkeit der Paletten beitragen.

Palettes pour la manutention - Palettes plates - Partie 3: Charges maximales en service (ISO 8611-3:2011)

L'ISO 8611-3:2011 spécifie la détermination de la charge maximale en service pour des palettes plates neuves dont les charges utiles sont connues dans différentes conditions de manutention.
Elle ne s'étend pas aux palettes à superstructure fixe ou à conteneur autoportant rigide pouvant être fixés mécaniquement à la palette et contribuant à sa résistance.

Palete za ravnanje z materiali - Ravne palete - 3. del: Največja delovna obremenitev (ISO 8611-3:2011)

Ta del standarda ISO 8611 obravnava določanje največje delovne obremenitve za nove palete z znanimi obremenitvami v različnih delovnih pogojih. Ni namenjen za palete s fiksno nadgradnjo ali za trdne, samonosilne posode, ki se lahko mehanično pritrdijo na paleto in pripomorejo k trdnosti palete.

General Information

• Status: Published
• Publication Date: 07-Aug-2012
• Withdrawal Date: 27-Feb-2013
• ICS: 55.180.20 - General purpose pallets
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5 - Primary packaging and transport packaging
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 08-Aug-2012
• Due Date: 23-Sep-2013
• Completion Date: 08-Aug-2012
• Ref Project: SIST EN ISO 8611-3:2013 - Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Paletten für den Gütertransport - Flachpaletten - Teil 3: Maximale Nutzlasten (ISO 8611-3:2011)Palettes pour la manutention - Palettes plates - Partie 3: Charges maximales en service (ISO 8611-3:2011)Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011)55.180.20General purpose palletsICS:Ta slovenski standard je istoveten z:EN ISO 8611-3:2012SIST EN ISO 8611-3:2013en,fr,de01-februar-2013SIST EN ISO 8611-3:2013SLOVENSKI
STANDARD



SIST EN ISO 8611-3:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 8611-3
August 2012 ICS 55.180.20 English Version
Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011)
Palettes pour la manutention - Palettes plates - Partie 3: Charges maximales en service (ISO 8611-3:2011)
Paletten für den Gütertransport - Flachpaletten - Teil 3: Maximale Nutzlasten (ISO 8611-3:2011) This European Standard was approved by CEN on 13 July 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8611-3:2012: ESIST EN ISO 8611-3:2013



EN ISO 8611-3:2012 (E) 2 Contents Page Foreword .3SIST EN ISO 8611-3:2013



EN ISO 8611-3:2012 (E) 3 Foreword The text of ISO 8611-3:2011 has been prepared by Technical Committee ISO/TC 51 “Pallets for unit load methods of materials handling” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 8611-3:2012 by Technical Committee CEN/TC 261 “Packaging” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 8611-3:2011 has been approved by CEN as a EN ISO 8611-3:2012 without any modification.
SIST EN ISO 8611-3:2013



SIST EN ISO 8611-3:2013



Reference numberISO 8611-3:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO8611-3First edition2011-05-15Pallets for materials handling — Flat pallets — Part 3: Maximum working loads Palettes pour la manutention — Palettes plates — Partie 3: Charges maximales en service
SIST EN ISO 8611-3:2013



ISO 8611-3:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
...