Fireworks - Part 7: Bengal matches - Specification and test methods

This document specifies requirements for the construction, performance, primary packaging and labelling of Bengal matches and the corresponding test methods. It is applicable to fireworks which are classified as Bengal match in category 1 in EN 14035-2 and which are contained in a primary pack.
It is not applicable to Bengal matches containing pyrotechnic composition that includes any of the following substances:
-   arsenic or arsenic compounds;
-   mixtures containing a mass fraction of chlorates greater than 80 %;
-   mixtures of chlorates with metals;
-   mixtures of chlorates with red phosphorus;
-   mixtures of chlorates with potassium hexacyanoferrate(II);
-   mixtures of chlorates with sulfur;
-   mixtures of chlorates with sulfides;
-   lead or lead compounds;
-   mercury compounds;
-   white phosphorus;
-   picrates or picric acid;
-   potassium chlorate with a mass fraction of bromates greater than 0,15 %;
-   sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;
-   zirconium with a particle size of less than 40 mm.
NOTE   In EN 14035-2, Bengal matches are classified as follows:
- brief description: short wooden stick partially coated (along one end) with slow-burning pyrotechnic composition, with a dot of friction-sensitive pyrotechnic composition at the tip, and designed to be hold in the hand;
- principal effects: emission of coloured flame and/or sparks.
Schemes for type testing of Bengal matches and batch testing of Bengal matches are specified in annex A and annex B respectively.
Requirements for construction, performance, labelling, sampling and testing of Bengal matches

Feuerwerkskörper - Teil 7: Bengalhölzer - Anforderungen und Prüfverfahren

Dieses Dokument legt Anforderungen an die Konstruktion, Funktion, kleinste Verpackungseinheit und Beschriftung von Bengalhölzern und die entsprechenden Prüfverfahren fest. Es gilt für Feuerwerkskörper, die als Bengalhölzer in die Kategorie 1 in der EN 14035-2 eingruppiert sind und die sich in einer Ursprungsverpackung befinden.
Es gilt nicht für Bengalhölzer, die pyrotechnischen Satz enthalten, in dem eine der nachfolgend aufgeführten Substanzen enthalten ist:
-   Arsen und Arsenverbindungen,
-   Blei und Bleiverbindungen,
-   Kaliumchlorat mit einem Massenanteil an Bromaten von mehr als 0,15 %,
-   Mischungen mit einem Massenanteil an Chloraten von mehr als 80 %,
-   Mischungen von Chloraten mit Metallen,
-   Mischungen von Chloraten mit rotem Phosphor,
-   Mischungen von Chloraten mit Kaliumhexacyanoferrat(II),
-   Mischungen von Chloraten mit Schwefel,
-   Mischungen von Chloraten mit Sulfiden,
-   Pikrate und Pikrinsäure,
-   Quecksilberverbindungen,
-   weißer Phosphor,
-   Schwefel mit einem Massenanteil an freier Säure (angegeben als H2SO4) von mehr als 0,002 %,
-   Zirkon mit einer Korngröße von weniger als 40 mm.
ANMERKUNG      In EN 14035-2 sind Bengalhölzer wie folgt klassifiziert:
-   Kurzbeschreibung: Kurzer Holzdraht, der teilweise (an einem Ende) mit einem langsam abbrennenden pyrotechnischen Satz überzogen ist, mit einem Tropfen reibempfindlichen pyrotechnischen Satz an der Spitze, und der zum Halten in der Hand vorgesehen ist;
-   Hauptwirkungen: Erzeugung farbiger Flammen und/oder Funken.
Übersichten für die Typ-Prüfung von Bengalhölzern und die Los-Prüfung von Bengalhölzern sind in Anhang A beziehungsweise Anhang B angegeben.

Artifices de divertissement - Partie 7: Allumettes Bengale - Spécifications et méthodes d'essai

Le présent document spécifie les exigences relatives à la construction, aux performances, à l'emballage primaire et à l'étiquetage des allumettes Bengale ainsi que les méthodes d'essai correspondantes. Elle s'applique aux artifices de divertissement qui sont classés comme allumettes Bengale de catégorie 1 dans l'EN 14035-2 et qui sont contenus dans un emballage primaire ou un assortiment.
Elle ne s'applique pas aux allumettes Bengale dont la composition pyrotechnique comprend l'une des substances suivantes :
-   arsenic ou composés d'arsenic ;
-   mélanges contenant une fraction en masse de chlorates supérieure à 80 % ;
-   mélanges de chlorates et de métaux ;
-   mélanges de chlorates et de phosphore rouge ;
-   mélanges de chlorates et d'hexacyanoferrate (II) de potassium ;
-   mélanges de chlorates et de soufre ;
-   mélanges de chlorates et de sulfures ;
-   plomb ou composés de plomb ;
-   composés de mercure ;
-   phosphore blanc ;
-   picrates ou acide picrique ;
-   chlorate de potassium comprenant une fraction en masse de bromates supérieure à 0,15 % ;
-   soufre ayant une acidité, exprimée en fraction en masse d'acide sulfurique, supérieure à 0,002 % ;
-   zirconium ayant une taille de particule inférieure à 40 mm.
NOTE   Dans l'EN 14035-2, les allumettes Bengale sont classées comme suit :
-   description abrégée : courte baguette en bois partiellement recouverte (à une extrémité) de composition pyrotechnique à combustion lente, comportant un point de composition pyrotechnique sensible au frottement à son extrémité, et conçue pour être tenue dans la main ;
-   effets principaux : émission de flammes et/ou d'étincelles colorées.
Les schémas d'essais de type et d'essais de lot des allumettes Bengale sont respectivement spécifiés dans l'Annexe A et l'Annexe B.

Ognjemet – 7. del: Bengalske vžigalice – Specifikacija in preskusne metode

General Information

Status
Withdrawn
Publication Date
17-Aug-2004
Withdrawal Date
28-Sep-2010
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-Sep-2010
Completion Date
29-Sep-2010

Relations

Buy Standard

Standard
EN 14035-7:2004
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fireworks - Part 7: Bengal matches - Specification and test methodsOgnjemet – 7. del: Bengalske vžigalice – Specifikacija in preskusne metodeArtifices de divertissement - Partie 7: Allumettes Bengale - Spécifications et méthodes d'essaiFeuerwerkskörper - Teil 7: Bengalhölzer - Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14035-7:2004SIST EN 14035-7:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 14035-7:200401-november-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14035-7August 2004ICS 71.100.30English versionFireworks - Part 7: Bengal matches - Specification and testmethodsArtifices de divertissement - Partie 7: Allumettes Bengales -Spécifications et méthodes d'essaiFeuerwerkskörper - Teil 7: Bengalhölzer - Anforderungenund PrüfverfahrenThis European Standard was approved by CEN on 14 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14035-7:2004: E



EN 14035-7:2004 (E) 2 Contents page 1 Scope.6 2 Normative references.7 3 Terms and definitions.7 4 Construction.7 4.1 Means of ignition.7 4.2 Attachment of friction head.7 4.3 Resistance to ignition by an abrasive surface.8 4.4 Protection of Bengal match.8 4.5 Material of stick.8 4.6 Integrity of stick.8 4.7 Net explosive content.8 4.8 Length of uncoated end of wooden stick (handle).8 4.9 Striking surface.8 5 Performance.8 5.1 Friction head.8 5.2 Principal effects.8 5.3 Burning matter.9 5.4 Burning of pyrotechnic composition.9 5.5 Burning rate of pyrotechnic composition.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.