Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO/FDIS 18314-4:2023)

This document specifies a formalism for the calculation of the illuminant metamerism of solid surface colours. It cannot be applied to colours of effect coatings without metrical adaptation.
This document only covers the phenomenon of metamerism for change of illuminant, which has the greatest meaning in practical application. In the case where chromaticity coordinates of a pair of samples under reference conditions do not exactly match, this document gives guidance on which correction measures to take. Regarding the reproduction of colours, the metamerism index is used as a measure of quality in order to specify tolerances for colour differences between a colour sample and a colour match under different illumination conditions.
The quantification of the illuminant metamerism of pairs of samples is formally performed by a colour difference assessment, for which tolerances that are common for the evaluation of residual colour differences can be used.
NOTE       In the colorimetric literature and textbooks, the term geometric metamerism is sometimes used for the case where two colours appear to be the same under a specific geometry for visual assessment and selected standard observer and standard illuminant pair, but are perceived as two different colours at changed observation geometry. The term geometric metamerism is different to metamerism described in this document.

Analytische Farbmessung - Teil 4: Metamerie-Index von Probenpaaren bei Lichtartwechsel (ISO/FDIS 18314-4:2023)

Dieses Dokument legt einen Formalismus zur Berechnung der Lichtart-Metamerie von Uni-Farben fest. Dieser kann ohne Anpassungen in der Metrik nicht auf Effektfarben von Überzügen bzw. Beschichtungen angewendet werden.
Dieses Dokument behandelt nur das Phänomen der Metamerie bei Lichtartwechsel, das in der praktischen Anwendung die größte Bedeutung hat. Für die Fälle, in denen die Farborte eines Probenpaares unter Referenz¬bedingungen nicht exakt übereinstimmen, enthält dieses Dokument Leitlinien für die zu ergreifenden Korrekturmaßnahmen. Bei der Reproduktion von Farben wird der Metamerie-Index als Qualitätsmaß verwendet, um Toleranzen für Farbunterschiede zwischen einer Farbvorlage und einer Farbnachstellung bei unterschiedlichen Beleuchtungsbedingungen festzulegen.
Die Quantifizierung der Lichtart-Metamerie von Probenpaaren wird formal auf eine Farbabstandsbewertung zurückgeführt, bei der Toleranzen herangezogen werden können, die bei der Bewertung reiner Restfarb¬abstände üblich sind.
ANMERKUNG   In der Farbliteratur und Fachbüchern wird manchmal auch der Begriff der Geometrischen Metamerie für den Fall verwendet, in dem zwei Farben unter einer bestimmten Beobachtungsgeometrie und einer gewählten Kombination aus Normalbeobachter und Lichtart gleich erscheinen, aber bei veränderter Beobachtungsgeometrie als zwei verschiedene Farben wahrgenommen werden. Der Begriff Geometrische Metamerie unterscheidet sich von der in diesem Dokument beschriebenen Metamerie.

Analyse colorimétrique - Partie 4: Indice de métamérisme de paires d'échantillons pour changement d'illuminant (ISO/FDIS 18314-4:2023)

Le présent document spécifie un formalisme pour le calcul du métamérisme de l’illuminant de couleurs de surfaces solides. Il ne s’applique pas à des couleurs de revêtements à effets sans adaptation métrique.
Le présent document ne couvre que le phénomène de métamérisme pour changement d’illuminant, qui a la plus grande signification dans l’application pratique. Dans le cas où les coordonnées trichromatiques d’une paire d’échantillons dans des conditions de référence ne correspondent pas exactement, le présent document fournit des recommandations sur les mesures de correction à prendre. En ce qui concerne la reproduction de couleurs, l’indice de métamérisme est utilisé comme mesure de qualité, de manière à spécifier des tolérances pour les écarts de couleurs entre un échantillon de couleurs et un appariement des couleurs dans différentes conditions d’éclairage.
La quantification du métamérisme de l’illuminant de paires d’échantillons est formellement réalisée par une évaluation de l’écart de couleur, pour laquelle des tolérances communes à l’évaluation d’écarts de couleurs résiduels peuvent être utilisées.
NOTE       Dans la littérature et les manuels relatifs à la colorimétrie, le terme métamérisme géométrique est parfois utilisé dans le cas où deux couleurs semblent être identiques sous une géométrie spécifique pour l’évaluation visuelle et l’observateur de référence sélectionné et la paire d’illuminants normalisés, mais sont perçues comme deux couleurs différentes lorsque la géométrie d’observation est changée. Le terme métamérisme géométrique est différent du métamérisme décrit dans le présent document.

Analizna kolorimetrija - 4. del: Metamerični indeks parov vzorcev pri spremembi vrste svetila (ISO/FDIS 18314-4:2023)

General Information

Status
Not Published
Publication Date
18-Dec-2023
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
20-Oct-2023
Completion Date
20-Oct-2023

Relations

Buy Standard

Draft
prEN ISO 18314-4:2023
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 18314-4:2023
01-marec-2023
Analizna kolorimetrija - 4. del: Metamerični indeks parov vzorcev pri spremembi
vrste svetila (ISO/DIS 18314-4:2023)
Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of
illuminant (ISO/DIS 18314-4:2023)
Analytische Farbmessung - Teil 4: Metamerie-Index von Probenpaaren bei
Lichtartwechsel (ISO/DIS 18314-4:2023)
Analyse colorimétrique - Partie 4: Indice de métamérisme de paires d'échantillons pour
changement d'illuminant (ISO/DIS 18314-4:2023)
Ta slovenski standard je istoveten z: prEN ISO 18314-4
ICS:
17.180.20 Barve in merjenje svetlobe Colours and measurement of
light
87.060.10 Pigmenti in polnila Pigments and extenders
oSIST prEN ISO 18314-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18314-4:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 18314-4:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18314-4
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-01-06 2023-03-31
Analytical colorimetry —
Part 4:
Metamerism index for pairs of samples for change of
illuminant
Analyse colorimétrique —
Partie 4: Indice de métamérisme de paires d'échantillons pour changement d'illuminant
ICS: 87.060.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 18314-4:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 18314-4:2023
ISO/DIS 18314-4:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18314-4
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:

Analytical colorimetry —
Part 4:
Metamerism index for pairs of samples for change of
illuminant
Analyse colorimétrique —
Partie 4: Indice de métamérisme de paires d'échantillons pour changement d'illuminant
ICS: 87.060.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 18314-4:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 18314-4:2023
ISO/DIS 18314-4:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.