iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1317-3:2000

(Main)

Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions

Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions

This European standard specifies requirements for the performance of crash cushions from vehicle impacts. It specifies performance classes and acceptance criteria for impact tests.

Rückhaltesysteme an Straßen - Teil 3: Leistungsklassen, Abnahmekriterien für Anprallprüfungen und Prüfverfahren für Anpralldämpfer

Diese Europäische Norm bestimmt Anforderungen für die Leistungsfähigkeit von Anpralldämpfern beim Anprall von Fahrzeugen. Sie bestimmt Leistungsklassen und Abnahmekriterien für Anprallprüfungen.

Dispositifs routiers de retenue - Partie 3: Atténuateurs de choc - Classes de performance, critère d'acceptation des essais de choc et méthodes d'essais

La présente norme européenne fixe les exigences relatives aux performances des atténuateurs lors de chocs de véhicules. Elle définit les différentes classes de performance ainsi que les différents critères d'acceptation des essais de choc.

Oprema cest - 3. del: Razredi uporabnosti, merila za preskušanje ob naletu in preskusne metode za blažilnike trkov

General Information

Status
Withdrawn
Publication Date
23-May-2000
Withdrawal Date
06-Jul-2010
ICS
13.200 - Accident and disaster control
93.080.30 - Road equipment and installations
Technical Committee
CEN/TC 226 - Road equipment
Drafting Committee
CEN/TC 226/WG 1 - Crash barriers, safety fences, guard rails and bridge parapets
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
07-Jul-2010
Completion Date
07-Jul-2010
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
Ref Project
SIST EN 1317-3:2002 - Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions

Relations

Parent
EN 1317-2:1998 - Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers
Effective Date
22-Dec-2008
Replaced By
EN 1317-3:2010 - Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
Effective Date
22-Dec-2008

Buy Standard

EN 1317-3:2002EN 1317-3:2002
PreviousNext
Standard
EN 1317-3:2002
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema cest - 3. del: Razredi uporabnosti, merila za preskušanje ob naletu in preskusne metode za blažilnike trkovRückhaltesysteme an Straßen - Teil 3: Leistungsklassen, Abnahmekriterien für Anprallprüfungen und Prüfverfahren für AnpralldämpferDispositifs routiers de retenue - Partie 3: Atténuateurs de choc - Classes de performance, critere d'acceptation des essais de choc et méthodes d'essaisRoad restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions93.080.30Cestna op
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16303:2020(Main)
Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
SIST EN 16303:2020

This document defines the accuracy, credibility and confidence in the results of virtual crash test to vehicle restraint systems through the definition of procedures for verification, validation and development of numerical models for roadside safety application. Finally it defines a list of indications to ensure the competences of an expert/organization in the domain of virtual testing.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17342:2019(Main)
Road restraint systems - Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
SIST-TS CEN/TS 17342:2019

This document specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This document excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent to the occupants of impacting cars. The assessment of barrier performance with respect to impacting vehicles is covered by EN 1317-1 and EN 1317-2.
This document defines performance classes taking into account rider speed classes, impact severity and the working width of the system with respect to rider impacts.
For systems designed to be added to a standard barrier, the test results are valid only when the system is fitted to the model of barrier used in the tests since the performance will not necessarily be the same if the system is fitted to a different barrier.

  • Technical specification
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16949:2016(Main)
Road restraint system - Pedestrian restraint system - Pedestrian parapets
SIST-TP CEN/TR 16949:2016

This Technical Report specifies geometrical and technical requirements for the design and manufacture for pedestrian parapets on road bridges, on footbridges, on top of retaining walls and on similar elevated structures.
This Technical Report also specifies test methods and provision for the labelling and marking of these products.
This Technical Report does not cover:
—   vehicle restraint systems;
—   pedestrian restraint systems in residential, commercial or industrial buildings and within their perimeter;
—   non-rigid rails i.e. rope, cables.
This Technical Report may be used for pedestrian parapets on structures which cross over railways, rivers and canals.

  • Technical report
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-5:2007+A2:2012/AC:2012(Corrigendum)
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
SIST EN 1317-5:2007+A2:2012/AC:2012

This European Standard specifies requirements for evaluation of conformity of the following vehicle restraint systems:
a)   safety barriers;
b)   crash cushions;
c)   terminals (will be effective when ENV 1317-4 becomes an EN);
d)   transitions (will be effective when ENV 1317-4 becomes an EN);
e)   vehicle / pedestrian parapets (only for the vehicle restraint function).
Pedestrian parapet requirements are not covered in this document.
Requirements for the evaluation of durability with respect to weathering are included in this document.
Requirements for other forms of durability (e.g. marine environment, sand abrasion) are not included.
Temporary barriers are not within the scope of this document.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-5:2007+A2:2012(Main + Amendment)
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
SIST EN 1317-5:2007+A2:2012

This European Standard specifies requirements for evaluation of conformity of the following vehicle restraint systems:
a)   safety barriers;
b)   crash cushions;
c)   terminals (will be effective when ENV 1317-4 becomes an EN);
d)   transitions (will be effective when ENV 1317-4 becomes an EN);
e)   vehicle / pedestrian parapets (only for the vehicle restraint function).
Pedestrian parapet requirements are not covered in this document.
Requirements for the evaluation of durability with respect to weathering are included in this document.
Requirements for other forms of durability (e.g. marine environment, sand abrasion) are not included.
Temporary barriers are not within the scope of this document.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-2:2010(Main)
Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets
SIST EN 1317-2:2010

This European Standard specifies requirements on impact performance of safety barriers, including vehicle parapets, classes of containment, working width, vehicle intrusion and impact severity levels.
NOTE   This European Standard should be read in conjunction with EN 1317-1. Both these standards support EN 1317-5.
The modifications included in standard are not a change of test criteria, in the sense of the EN 1317-5:2007, ZA.3.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-3:2010(Main)
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
SIST EN 1317-3:2010

This European Standard specifies requirements for the performance of crash cushions during vehicle impacts. It specifies performance classes and acceptance criteria for impact tests, which should be read in conjunction with EN 1317-1 and EN 1317-5.
The modifications included in this European Standard are not a change of test criteria, in the sense of EN 1317-5:2007, ZA.3.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1317-1:2010(Main)
Road restraint systems - Part 1: Terminology and general criteria for test methods
SIST EN 1317-1:2010

This European Standard contains provisions for the measurement of performance of products for the road restraint systems, under impact and impact severity levels, and includes:
-   Test site data;
-   Definitions for road restraint systems;
-   Vehicle specification (including loading requirements) for vehicles used in the impact tests;
-   Instrumentation for the vehicles;
-   Calculation procedures and methods of recording crash impact data including impact severity levels;
-   VCDI.
The modifications included in this standard are not a change of test criteria, in the sense of EN 1317-5:2007, ZA.3.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
ENV 1317-4:2001(Main)
Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
SIST ENV 1317-4:2002

This European Prestandard specifies requirements for the performance of terminals and transitions. It defines performance classes and acceptance criteria for impact tests.

  • Standardization document
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprCEN/TR 1317-10(Main)
Road restraint system - Part 10: Assessment methods and design guidelines for transitions and terminal and crashcushion connection - Transitions
kSIST-TP FprCEN/TR 1317-10:2023

This Technical Report defines assessment methods for transitions, considered as the linkage between safety barriers or between
safety barriers and removable barrier sections defined by CEN/TS RBS.
This Technical Report also defines assessment methods for connection-transitions to terminals and crash cushions.
Road Authorities and regulatory authorities are free to determine assessment methods, values, measurements etc. and to fix the
details of the requirements.
Assessment methods and design rules can also be utilised in connection to evaluation of changed versions.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day