CEN/TR 1317-10:2023
(Main)Road restraint systems - Part 10: Assessment methods and design guidelines for transitions, terminal and crash cushion connection - transitions
Road restraint systems - Part 10: Assessment methods and design guidelines for transitions, terminal and crash cushion connection - transitions
This Technical Report defines assessment methods for transitions, considered as the linkage between safety barriers or between
safety barriers and removable barrier sections defined by CEN/TS RBS.
This Technical Report also defines assessment methods for connection-transitions to terminals and crash cushions.
Road Authorities and regulatory authorities are free to determine assessment methods, values, measurements etc. and to fix the
details of the requirements.
Assessment methods and design rules can also be utilised in connection to evaluation of changed versions.
Rückhaltesysteme an Straßen - Teil 10: Prüfmethoden und Design-Richtlinien für Übergangskonstruktionen und Anbindungen von Anpralldämpfern und von Anfangs- und Endkonstruktionen an Schutzeinrichtungen
Dispositifs de retenue routiers - Partie 10: Méthodes d'évaluation et lignes directrices de conception pour les raccordements et les raccordements d'extrémités de file et d'atténuateur de choc
Le présent document définit les méthodes d’évaluation des raccordements, considérés comme formant le lien entre les barrières de sécurité ou entre les barrières de sécurité et les sections de barrière amovibles.
Le présent document définit également les méthodes d’évaluation pour les raccordements d’extrémités de file et d’atténuateurs de choc.
Les autorités routières et les organismes de réglementation sont libres de déterminer les méthodes d’évaluation, les valeurs, les mesures, etc. et de préciser les détails des exigences.
Les méthodes d’évaluation et les règles de conception peuvent également être utilisées dans le cadre de l’évaluation des versions modifiées.
Oprema cest - 10. del: Metode ocenjevanja in smernice za načrtovanje prehodnih konstrukcij za povezovanje med različnimi sistemi za zadrževanje, vključno z zaključnicami in blažilniki trkov
Ta dokument določa metode ocenjevanja za prehodne konstrukcije, ki delujejo kot povezava med varnostnimi
ograjami in med varnostnimi ograjami in odstranljivimi elementi varnostnih ograj.
Ta dokument prav tako določa metode ocenjevanja za povezave/prehodne konstrukcije do zaključnic in blažilnikov trkov.
Cestni in regulativni organi lahko prosto določijo metode ocenjevanja, vrednosti, meritve itd. in tudi podrobnosti zahtev.
Metode ocenjevanja in pravila za načrtovanje je prav tako mogoče uporabiti v zvezi z ocenjevanjem spremenjenih različic.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 1317-10:2024
01-marec-2024
Nadomešča:
SIST ENV 1317-4:2002
Oprema cest - 10. del: Metode ocenjevanja in smernice za načrtovanje prehodnih
konstrukcij za povezovanje med različnimi sistemi za zadrževanje, vključno z
zaključnicami in blažilniki trkov
Road restraint systems - Part 10: Assessment methods and design guidelines for
transitions, terminal and crash cushion connection - transitions
Rückhaltesysteme an Straßen - Prüfmethoden und Design-Richtlinien für
Übergangskonstruktionen und Anbindungen von Anpralldämpfern und von Anfangs- und
Endkonstruktionen an Schutzeinrichtungen
Dispositifs de retenue routiers - Méthodes d'évaluation et lignes directrices de
conception pour les raccordements et les raccordements d'extrémités de file et
d'atténuateur de choc
Ta slovenski standard je istoveten z: CEN/TR 1317-10:2023
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST-TP CEN/TR 1317-10:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 1317-10:2024
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 1317-10:2024
CEN/TR 1317-10
TECHNICAL REPORT
RAPPORT TECHNIQUE
September 2023
TECHNISCHER REPORT
ICS 13.200; 93.080.30 Supersedes ENV 1317-4:2001
English Version
Road restraint system - Part 10: Assessment methods and
design guidelines for transitions and terminal and
crashcushion connection - Transitions
Dispositifs de retenue routiers ¿ Méthodes d'évaluation Rückhaltesysteme an Straßen - Prüfmethoden und
et lignes directrices de conception pour les Design-Richtlinien für Übergangskonstruktionen und
raccordements et les raccordements d'extrémités de Anbindungen von Anpralldämpfern und von Anfangs-
file et d'atténuateur de choc und Endkonstruktionen an Schutzeinrichtungen
This Technical Report was approved by CEN on 28 August 2023. It has been drawn up by the Technical Committee CEN/TC 226.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 1317-10:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 1317-10:2024
CEN/TR 1317-10:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviations. 7
5 Assessment methods and design rules for transitions . 7
6 Assessment methods for connection-transitions . 15
7 Performance of transitions and connection-transitions . 17
8 Reporting . 18
Annex A (informative) Reduction factors for normalized dynamic deflection in design rule C2. 19
Annex B (informative) Working width and vehicle intrusion for transitions . 20
Annex C (informative) Choice of the impact point for long transitions . 21
Bibliography .
...
SLOVENSKI STANDARD
SIST-TP CEN/TR 1317-10:2024
01-marec-2024
Nadomešča:
SIST ENV 1317-4:2002
Oprema cest - 10. del: Metode ocenjevanja in smernice za načrtovanje povezave
prehodov, zaključnic in naletnih blažilnikov trkov - Prehodi
Road restraint systems - Part 10: Assessment methods and design guidelines for
transitions, terminal and crash cushion connection - transitions
Rückhaltesysteme an Straßen - Prüfmethoden und Design-Richtlinien für
Übergangskonstruktionen und Anbindungen von Anpralldämpfern und von Anfangs- und
Endkonstruktionen an Schutzeinrichtungen
Dispositifs de retenue routiers - Méthodes d'évaluation et lignes directrices de
conception pour les raccordements et les raccordements d'extrémités de file et
d'atténuateur de choc
Ta slovenski standard je istoveten z: CEN/TR 1317-10:2023
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST-TP CEN/TR 1317-10:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 1317-10:2024
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 1317-10:2024
CEN/TR 1317-10
TECHNICAL REPORT
RAPPORT TECHNIQUE
September 2023
TECHNISCHER REPORT
ICS 13.200; 93.080.30 Supersedes ENV 1317-4:2001
English Version
Road restraint system - Part 10: Assessment methods and
design guidelines for transitions and terminal and
crashcushion connection - Transitions
Dispositifs de retenue routiers ¿ Méthodes d'évaluation Rückhaltesysteme an Straßen - Prüfmethoden und
et lignes directrices de conception pour les Design-Richtlinien für Übergangskonstruktionen und
raccordements et les raccordements d'extrémités de Anbindungen von Anpralldämpfern und von Anfangs-
file et d'atténuateur de choc und Endkonstruktionen an Schutzeinrichtungen
This Technical Report was approved by CEN on 28 August 2023. It has been drawn up by the Technical Committee CEN/TC 226.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 1317-10:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 1317-10:2024
CEN/TR 1317-10:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviations. 7
5 Assessment methods and design rules for transitions . 7
6 Assessment methods for connection-transitions . 15
7 Performance of transitions and connection-transitions . 17
8 Reporting . 18
Annex A (informative) Reduction factors for normalized dynamic deflection in design rule C2. 19
Annex B (informative) Working width and vehicle intrusion for transitions . 20
Annex C (informative) Choice of the impact point for long transitions . 21
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.