EN 12674-4:2006

Roll containers - Part 4: Performance requirements

This European Standard specifies appropriate tests and levels of performance for roll containers and dollies manufactured in all materials, assembled for use and stacked for storage when tested in accordance with EN 12674-3.

Rollbehälter - Teil 4: Leistungsanforderungen

Diese Europäische Norm legt Leistungsstufen für aus allen Werkstoffen bestehende Rollbehälter und Rollböcke fest, die diese bei Prüfung nach EN 12674 3: "Prüfverfahren" erreichen müssen. In Anhang A ist eine Zusammenfassung der normativen Leistungsstufen in Tabellenform angegeben. Anhang B enthält eine tabellarische Zusammenfassung der wahlweise zu erfüllenden Leistungsanforderungen.

Conteneurs à roulettes - Partie 4: Exigences de performances

La présente Norme européenne spécifie les essais appropriés et les niveaux de performances s’appliquant aux conteneurs à roulettes et aux plateaux roulants constitués de tous matériaux, prêts à l’emploi et empilés pour le stockage, lorsqu’ils sont soumis aux essais conformément à EN 12674-3.

Kontejnerji s kolesi - 4. del: Zahtevane lastnosti

General Information

• Status: Withdrawn
• Publication Date: 05-Dec-2006
• Withdrawal Date: 14-Apr-2015
• ICS: 55.180.10 - General purpose containers
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5 - Primary packaging and transport packaging
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Apr-2015
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: SIST EN 12674-4:2007 - Roll containers - Part 4: Performance requirements

Relations

• Replaced By: EN 12674-4:2015 - Roll containers - Part 4: Performance requirements
• Effective Date: 22-Apr-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Roll containers - Part 4: Performance requirementsKontejnerji s kolesi - 4. del: Zahtevane lastnostiConteneurs a roulettes - Partie 4: Exigences de performancesRollbehälter - Teil 4: LeistungsanforderungenTa slovenski standard je istoveten z:EN 12674-4:2006SIST EN 12674-4:2007en;fr;de55.180.10General purpose containersICS:SLOVENSKI
STANDARDSIST EN 12674-4:200701-april-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12674-4December 2006ICS 55.180.10 English VersionRoll containers - Part 4: Performance requirementsConteneurs à roulettes - Partie 4: Exigences deperformancesRollbehälter - Teil 4: LeistungsanforderungenThis European Standard was approved by CEN on 4 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12674-4:2006: E



EN 12674-4:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Sampling of roll containers to be tested.6 4.1 Sequence of tests.6 4.2 Applicability of normative tests.6 5 Performance requirements – normative tests.7 5.1 Stability tests (4.2.1 of EN 12674-3:2004).7 5.1.1 General.7 5.1.2 Dolly - dummy load.8 5.1.3 Dolly - stacked empty.8 5.1.4 Roll container (unloaded).8 5.1.5 Roll container (dummy load).8 5.2 Diagonal resistance test (4.2.2 of EN 12674-3:2004).8 5.3 Strength and stiffness of roll container sides (4.2.3 of EN 12674-3:2004).8 5.4 Side frame to base cantilever test (4.2.4 of EN 12674-3:2004).8 5.5 Castor lateral load resistance test (4.2.5 of EN 12674-3:2004).9 5.6 Distributed load floor test (4.2.6 of EN 12674-3:2004).9 5
...