EN ISO 10517:2009
(Main)Powered hand-held hedge trimmers - Safety (ISO 10517:2009)
Powered hand-held hedge trimmers - Safety (ISO 10517:2009)
ISO 10517:2009 specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades.
It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
It deals with all significant hazards, hazardous situations and events relevant to hand-held powered hedge trimmers when they are used as intended.
It does not deal with low noise design. It is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor to hedge trimmers manufactured before the date of its publication.
Tragbare motorbetriebene Heckenscheren - Sicherheit (ISO 10517:2009)
Diese Internationale Norm legt sicherheitstechnische Anforderungen und Prüfungen für die Gestaltung und Konstruktion von tragbaren benzinbetriebenen Heckenscheren fest, nachfolgend „Hecken¬scheren“ genannt, die für die Benutzung durch einen Bediener zum Schneiden von Hecken und Büschen bestimmt und mit einem oder mehreren sich linear bewegenden Messern ausgestattet sind.
Sie legt Maßnahmen zur Vermeidung oder Verminderung der sich aus dem Gebrauch ergebenden Gefährdungen fest. Außerdem spezifiziert sie die Art der Informationen über sicheres Arbeiten, die vom Hersteller zur Verfügung zu stellen sind.
Diese Internationale Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und ereignisse, die bei bestimmungsgemäßer Anwendung für tragbare motorbetriebene Heckenscheren relevant sind (siehe Abschnitt 4).
Diese Internationale Norm behandelt keine geräuscharmen Konstruktionen. Sie gilt nicht für Heckenscheren mit einem Hubraum über 80 cm3 und auch nicht für Heckenscheren, die vor dem Datum dieser Veröffentlichung hergestellt worden sind.
Taille-haies portatifs à moteur - Sécurité (ISO 10517:2009)
L'ISO 10517:2009 spécifie des exigences de sécurité pour la conception et la construction des taille-haies portatifs à moteur thermique intégré, par la suite nommés taille-haies, conçus pour être utilisés par un opérateur pour tailler les haies et les arbustes, et comportant une ou plusieurs lames de coupe à mouvement linéaire alternatif. Elle spécifie également le mode de vérification de ces exigences.
L'ISO 10517:2009 établit des méthodes permettant d'éliminer ou de réduire les phénomènes dangereux inhérents à leur utilisation. En outre, elle spécifie le type d'informations que le fabricant doit donner sur les pratiques d'utilisation sûres.
L'ISO 10517:2009 traite de tous les événements et phénomènes dangereux significatifs spécifiques des taille-haies portatifs à moteur lorsqu'ils sont utilisés normalement.
L'ISO 10517:2009 ne traite pas de la limitation du niveau sonore pendant la phase de conception. Elle n'est applicable ni aux taille-haies motorisés à plus de 80 cm3, ni aux taille-haies fabriqués avant sa date de publication.
Prenosni motorni obrezovalniki žive meje - Varnost (ISO 10517:2009)
Ta mednarodni standard določa varnostne zahteve in njihovo preverjanje za načrtovanje in izdelavo prenosnih bencinskih motornih obrezovalnikov žive meje, v nadaljnjem besedilu: »obrezovalniki žive meje«, ki so namenjeni za enega samega upravljavca za obrezovanje žive meje in grmovja z uporabo enega ali več linearnih povratnih rezil. Določa metode za odpravo ali zmanjšanje nevarnosti, ki izhajajo iz uporabe obrezovalnikov. Poleg tega določa vrsto informacij, ki jih mora predložiti proizvajalec v zvezi z varnimi delovnimi postopki. Ta mednarodni standard opisuje vsa večja tveganja, nevarne razmere in dogodke v zvezi s prenosnimi motornimi obrezovalniki žive meje, kadar se uporabljajo v skladu z njihovim namenom (glej točko 4). Ta mednarodni standard ne obravnava tišje zasnove. Ne uporablja se za obrezovalnike žive meje s prostornino motorja, večjo od 80 cm3, in obrezovalnike žive meje, izdelane pred objavo tega standarda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2009
1DGRPHãþD
SIST EN 774:1996
SIST EN 774:1996/A1:2000
SIST EN 774:1996/A2:1998
SIST EN 774:1996/A3:2001
Prenosni motorni obrezovalniki žive meje - Varnost (ISO 10517:2009)
Powered hand-held hedge trimmers - Safety (ISO 10517:2009)
Tragbare motorbetriebene Heckenscheren - Sicherheit (ISO 10517:2009)
Taille-haies portatifs à moteur - Sécurité (ISO 10517:2009)
Ta slovenski standard je istoveten z: EN ISO 10517:2009
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 10517
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 65.060.70 Supersedes EN 774:1996
English Version
Powered hand-held hedge trimmers - Safety (ISO 10517:2009)
Taille-haies portatifs à moteur - Sécurité (ISO 10517:2009) Tragbare motorbetriebene Heckenscheren - Sicherheit
(ISO 10517:2009)
This European Standard was approved by CEN on 24 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10517:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2006/42/EC .5
Foreword
This document (EN ISO 10517:2009) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 774:1996.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA and Annex ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10517:2009 has been approved by CEN as a EN ISO 10517:2009 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and
the Essential Requirements of EU Directive 98/37/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/37/EC on machinery, amended by the New Approach Directive 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements, except Essential Requirement 1.5.8 of that Directive, and
associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
Annex ZB
(informative)
Relationship between this European Standard and
the Essential Requirements of EC Directive 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements, except Essential Requirement 1.5.8 of that Directive, and
associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 10517
Second edition
2009-07-15
Powered hand-held hedge trimmers —
Safety
Taille-haies portatifs à moteur — Sécurité
Reference number
ISO 10517:2009(E)
©
ISO 2009
ISO 10517:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 10517:2009(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope .1
2 Normative references .1
3 Terms and definitions .2
4 List of significant hazards .6
5 Safety requirements and/or verification of safety measures .8
5.1 General.8
5.2 Handles and cutting device .8
5.3 Starting and idling .18
5.4 Controls .18
5.5 Power drive parts protection.19
5.6 Heat protection.19
5.7 Fuel tank .20
5.8 Engine exhaust .20
5.9 Electrical requirements of ignition system .20
5.10 Vibration .21
5.11 Noise .21
6 Information for use .22
6.1 Instructions for use .22
6.2 Marking .23
6.3 Warnings.23
6.4 Durability of marking and warnings.24
Annex A (informative) Safety instructions.25
Annex B (informative) Symbols and pictograms .28
Annex C (normative) Vibration .31
Annex D (normative) Noise test code — Engineering method (grade 2) .39
Annex E (informative) Example of material and construction fulfilling the requirements for an
artificial surface for the noise test code.48
Bibliography .50
ISO 10517:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.