FprEN 13991
(Main)Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods
Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods
This document specifies the requirements and the test methods for creosotes for industrial wood preservation.
Different grades of creosote are used depending on the desired properties of the treated wood.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document cannot address all of the safety implications associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and assess the applicability of regulatory limitations prior to use. The warnings to use are covered in Annex C.
Derivate der Kohlenpyrolyse - Öle aus Steinkohlenteer: Kreosot - Anforderungen und Prüfverfahren
Dieses Dokument legt die Anforderungen und Prüfverfahren für Kreosotöle für industriellen Holzschutz fest.
In Abhängigkeit von den gewünschten Eigenschaften des behandelten Holzes werden verschiedene Kreosotöltypen verwendet.
WARNUNG - Die Anwendung dieses Dokumentes kann den Einsatz gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Dieses Dokument kann nicht alle mit seiner Anwendung verbundenen Sicherheitsprobleme ansprechen. Es liegt in der Verantwortung des Anwenders dieses Dokumentes, vor der Verwendung angemessene Gesundheits- und Sicherheitsmaßnahmen festzulegen und die Anwendbarkeit regulatorischer Einschränkungen zu bewerten. Die Anwendungswarnungen werden in Anhang C behandelt.
Produits dérivés de la pyrolyse du charbon - Huiles de goudron de houille: Créosotes - Spécifications et méthodes d'essai
Le présent document spécifie les exigences et les méthodes d’essai pour les créosotes utilisées dans l’industrie de préservation du bois.
Les créosotes employées sont classées en fonction des propriétés attendues du bois traité.
AVERTISSEMENT - Le présent document peut impliquer l’utilisation de produits et la mise en oeuvre de modes opératoires et d’appareillages à caractère dangereux. Le présent document n’a pas pour but d’aborder tous les problèmes de sécurité liés à son utilisation. Il incombe à l’utilisateur du présent document d’établir, avant de l’utiliser, des pratiques d’hygiène et de sécurité et de déterminer l’applicabilité des restrictions réglementaires. Les avertissements pour l’utilisation sont traités à l’Annexe C.
Derivati pri pirolizi premoga - Olja iz premogovega katrana: kreozoti - Specifikacije in metode preskušanja
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13991:2022
01-marec-2022
Derivati pri pirolizi premoga - Olja iz premogovega katrana: kreozoti - Specifikacije
in metode preskušanja
Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test
methods
Derivate der Kohlenpyrolyse - Öle aus Steinkohlenteer: Kreosot - Anforderungen und
Prüfverfahren
Produits dérivés de la pyrolyse du charbon - Huiles de goudron de houille: Créosotes -
Spécifications et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 13991
ICS:
75.160.10 Trda goriva Solid fuels
oSIST prEN 13991:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13991:2022
---------------------- Page: 2 ----------------------
oSIST prEN 13991:2022
DRAFT
EUROPEAN STANDARD
prEN 13991
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2022
ICS 71.100.50; 75.140 Will supersede EN 13991:2003
English Version
Derivatives from coal pyrolysis - Coal tar based oils:
creosotes - Specifications and test methods
Produits dérivés de la pyrolyse du charbon - Huiles de Derivate der Kohlenpyrolyse - Öle aus Steinkohlenteer:
goudron de houille: Créosotes - Spécifications et Kreosot - Anforderungen und Prüfverfahren
méthodes d'essai
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 317.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13991:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13991:2022
prEN 13991:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Sampling . 4
5 Specifications and test methods . 5
Annex A (normative) Determination of the crystallization temperature of coal tar oil . 6
A.1 Scope . 6
A.2 Sampling . 6
A.3 Apparatus: an example of the apparatus is given in Figure A.1 . 6
A.4 Procedure.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.