prEN ISO 10873
(Main)Dentistry - Denture adhesives (ISO/DIS 10873:2025)
Dentistry - Denture adhesives (ISO/DIS 10873:2025)
This document classifies denture adhesives used by wearers of removable dentures; it also specifies requirements, test methods and instructions to be supplied for the use of such products.
This document is applicable to denture adhesives for use by the consumer and excludes the dental lining materials prescribed or applied by dental professionals.
Zahnheilkunde - Prothesenhaftmittel (ISO/DIS 10873:2025)
Médecine bucco-dentaire - Adhésifs pour prothèses dentaires (ISO/DIS 10873:2025)
Zobozdravstvo - Lepila za zobne proteze (ISO/DIS 10873:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2025
Zobozdravstvo - Lepila za zobne proteze (ISO/DIS 10873:2025)
Dentistry - Denture adhesives (ISO/DIS 10873:2025)
Zahnheilkunde - Prothesenhaftmittel (ISO/DIS 10873:2025)
Médecine bucco-dentaire - Adhésifs pour prothèses dentaires (ISO/DIS 10873:2025)
Ta slovenski standard je istoveten z: prEN ISO 10873
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
71.100.70 Kozmetika. Toaletni Cosmetics. Toiletries
pripomočki
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 10873
ISO/TC 106/SC 7
Dentistry — Denture adhesives
Secretariat: JISC
Médecine bucco-dentaire — Adhésifs pour prothèses dentaires
Voting begins on:
2025-03-05
ICS: 71.100.70
Voting terminates on:
2025-05-28
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 10873:2025(en)
DRAFT
ISO/DIS 10873:2025(en)
International
Standard
ISO/DIS 10873
ISO/TC 106/SC 7
Dentistry — Denture adhesives
Secretariat: JISC
Médecine bucco-dentaire — Adhésifs pour prothèses dentaires
Voting begins on:
ICS: 71.100.70
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 10873:2025(en)
ii
ISO/DIS 10873:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
4.1 General .2
4.2 Types and classes .2
5 Requirements . 2
5.1 General .2
5.1.1 Biocompatibility .2
5.1.2 Microbiology .2
5.1.3 Stability .2
5.2 Specific requirements for Type 1 adhesives .2
5.2.1 Washability.2
5.2.2 Strength of the adhesion to the prosthesis .2
5.3 Specific requirements for Type 2 adhesives .2
5.3.1 Adhesion strength .2
5.3.2 Peeling property .2
5.3.3 Consistency .3
6 Sampling . 3
7 Measurements and test methods . 3
7.1 Test conditions .3
7.2 Determination of stability — Aging procedure .3
7.3 Test of washability (for Type 1 adhesives) .3
7.3.1 Apparatus and materials .3
7.3.2 Reagent .3
7.3.3 Procedure .3
7.4 Adhesion strength test I (for Type 1 adhesives) .3
7.4.1 General .3
7.4.2 Apparatus .3
7.4.3 Procedure .5
7.5 Adhesion strength test II (for Type 1 adhesives) .7
7.5.1 General .7
7.5.2 Apparatus .7
7.5.3 Procedure .7
7.6 Adhesion strength test (for Type 2 adhesives) .8
7.6.1 Apparatus .8
7.6.2 Procedure .9
7.7 Peeling test (for Type 2 adhesives) .9
7.7.1 Apparatus and materials .9
7.7.2 Reagent .10
7.7.3 Procedure .10
7.8 Consistency test (for Type 2 adhesives) .10
7.8.1 Apparatus .10
7.8.2 Procedure . 12
7.9 A ssessment . 12
8 Packaging.13
9 Accompanying information .13
9.1 Information to be included in the instructions for use . 13
9.2 Labelling on the package . 13
iii
ISO/DIS 10873:2025(en)
Bibliography . 14
iv
ISO/DIS 10873:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing In
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.