EN 738-4:1998/A1:2002

Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment

To amend EN 738-4 so as to include requirements for use with nitric oxide/ nitrogen mixtures

Druckminderer zur Verwendung mit medizinischen Gasen - Teil 4: Niederdruckminderer zum Einsetzen in medizinische Geräte

Détendeurs pour l'utilisation avec les gaz médicaux - Partie 4: Détendeurs basse pression conçus pour le matériel médical

Ajouter à la liste des gaz médicaux :
"mélanges NO/N2 (NO £ 1 000 µl/l)"

Tlačni regulatorji za medicinske pline - 4. del: Nizkotlačni regulatorji za vgradnjo v medicinske naprave

General Information

• Status: Withdrawn
• Publication Date: 16-Apr-2002
• Withdrawal Date: 31-May-2008
• ICS: 11.040.10 - Anaesthetic, respiratory and reanimation equipment
• ICS: 23.060.40 - Pressure regulators
• Technical Committee: CEN/TC 215 - Respiratory and anaesthetic equipment
• Drafting Committee: CEN/TC 215/WG 3 - Medical gas supply systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Jun-2008
• Completion Date: 01-Jun-2008
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN 738-4:2000/A1:2002 - Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment

Relations

• Amends: EN 738-4:1998 - Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10524-4:2008 - Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 738-4:2000/A1:2002
01-november-2002
7ODþQLUHJXODWRUML]DPHGLFLQVNHSOLQHGHO1L]NRWODþQLUHJXODWRUML]DYJUDGQMRY
PHGLFLQVNHQDSUDYH
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
intended for incorporation into medical equipment
Druckminderer zur Verwendung mit medizinischen Gasen - Teil 4: Niederdruckminderer
zum Einsetzen in medizinische Geräte
Détendeurs pour l'utilisation avec les gaz médicaux - Partie 4: Détendeurs basse
pression conçus pour le matériel médical
Ta slovenski standard je istoveten z: EN 738-4:1998/A1:2002
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN 738-4:2000/A1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 738-4:2000/A1:2002

---------------------- Page: 2 ----------------------

SIST EN 738-4:2000/A1:2002
EUROPEAN STANDARD
EN 738-4:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2002
ICS 11.040.10; 23.060.40
English version
Pressure regulators for use with medical gases - Part 4: Low-
pressure regulators intended for incorporation into medical
equipment
Détendeurs pour l'utilisation avec les gaz médicaux - Partie Druckminderer zur Verwendung mit medizinischen Gasen -
4: Détendeurs basse pression conçus pour le matériel Teil 4: Niederdruckminderer zum Einsetzen in medizinische
médical Geräte
This amendment A1 modifies the European Standard EN 738-4:1998; it was approved by CEN on 4 March 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 738-4:1998/A1:2002 E
worldwide for CEN national M
...