EN ISO 9241-410:2008

Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices (ISO 9241-410:2008)

ISO 9241-410:2008 specifies criteria based on ergonomics factors for the design of physical input devices for interactive systems including keyboards, mice, pucks, joysticks, trackballs, trackpads, tablets and overlays, touch‑sensitive screens, styli and light pens, and voice- and gesture‑controlled devices. It gives guidance on the design of these devices, taking into consideration the capabilities and limitations of users, and specifies generic design criteria for physical input devices, as well as specific criteria for each type of device. Requirements for the design of products are given either as a result of context-free considerations, or else can be determined based on the specified design criteria for the intended use; such specified criteria generally having been subdivided into task‑oriented categories, wherever applicable.
ISO 9241-410:2008 does not specify the categories that are appropriate for devices as, according to the concept of usability, a product has no inherent usability. Selecting the category to which a certain property of a device belongs is subject to the design of a product.
ISO 9241-410:2008 is expected to be used by the manufacturers of physical input devices, including product designers and test organizations, in determining the design characteristics of a device for its intended context of use (user population, task, software or environment, etc.). The data generated by the users of ISO 9241-410:2007 for the description of the properties of their products can be applied in the selection of a device adequate for the actual context of use on the basis of the task primitives relevant for the task of the specific user population, and for achieving the required level of efficiency and effectiveness for a given system.

Ergonomie der Mensch-System-Interaktion - Teil 410: Gestaltungskriterien für physikalische Eingabegeräte (ISO 9241-410:2008)

Dieser Teil von ISO 9241 beschreibt Gestaltungskriterien auf der Basis ergonomischer Regeln für die physi¬kalischen Eingabegeräte interaktiver Systeme, einschließlich Tastaturen, Mäusen, Pucks, Joysticks, Roll¬kugeln (Trackballs), Trackpads, Tabletts und Overlays, Berührungsbildschirmen (Touchscreens), Griffeln und Lichtgriffeln, sprachgesteuerten Geräten und Gestik gesteuerten Geräten und berücksichtigt die Fähigkeiten und Grenzen der Benutzer. Dieser Teil von ISO 9241 enthält generische Gestaltungskriterien für physi¬kalische Eingabegeräte sowie spezifische Kriterien für jeden Gerätetyp. Anforderungen an die Produkt¬gestaltung erfolgen entweder auf der Basis kontextunabhängiger Aspekte oder können auf der Basis spezifischer Gestaltungskriterien für die vorgesehene Nutzung bestimmt werden, welche im Allgemeinen, sofern möglich, in aufgabenorientierte Kategorien unterteilt wurden.
BEISPIEL   Die Auflösung eines Zeigegerätes wird in Abhängigkeit von den vier Schwierigkeitsgraden (ID) des Fitts-Tests angegeben. Die erforderliche Kategorie für die Auflösung kann bestimmt werden auf der Basis der Aufgaben¬merkmale, der Benutzerpopulation und des Nutzungskontextes für die vorgesehene Anwendung.
Dieser Teil von ISO 9241 bestimmt nicht die Kategorien die für Geräte angemessen sind, da ein Produkt entsprechend dem Gebrauchstauglichkeitskonzept keine inhärente Gebrauchstauglichkeit besitzt. Die Wahl der Kategorie für eine bestimmte Geräteeigenschaft ist Gegenstand der Produktgestaltung.
Dieser Teil von ISO 9241 ist vorgesehen für die Hersteller von physikalischen Eingabegeräten einschließlich Produktdesigner und Prüforganisationen, um die Gestaltungsmerkmale eines Gerätes für den vorgesehenen Nutzungskontext zu bestimmen (Benutzerpopulation, Aufgabe, Software oder Umgebung usw.).

Ergonomie de l'interaction homme-système - Partie 410: Critères de conception des dispositifs d'entrée physiques (ISO 9241-410:2008)

L'ISO 9241-410:2008 spécifie des critères en fonction de facteurs ergonomiques pour la conception des dispositifs d'entrée physiques pour systèmes interactifs comprenant les claviers, souris, curseurs à réticule, manettes, boules roulantes, pavés tactiles, tablettes et barres graphiques, écrans tactiles, stylets et photostyles, dispositifs à commande vocale, et dispositifs à commande gestuelle. Elle fournit des recommandations de conception de ces dispositifs qui tiennent compte des capacités et des limites des utilisateurs, et spécifie des critères de conception génériques pour les dispositifs d'entrée physiques, ainsi que des critères de conception spécifiques à chaque type de dispositif. Les exigences de conception des produits sont indiquées comme le résultat de réflexions sans contexte ou peuvent être déterminées en fonction des critères de conception spécifiés, adaptés à l'application prévue des produits; ces critères spécifiés sont généralement subdivisés en catégories axées sur les tâches, le cas échéant.
L'ISO 9241-410:2008 ne spécifie pas les catégories appropriées aux dispositifs car, selon le concept d'utilisabilité, l'utilisabilité inhérente d'un produit n'existe pas. La sélection de la catégorie à laquelle appartient une propriété donnée d'un dispositif dépend de la conception d'un produit.
L'ISO 9241-410:2008 est destinée à être utilisée par les fabricants de dispositifs d'entrée physiques, notamment les concepteurs de produits et les organismes d'essais, pour déterminer les caractéristiques de conception du dispositif dans le contexte d'utilisation prévu (la population d'utilisateurs, la tâche, le logiciel ou l'environnement, etc.). Les données générées par les utilisateurs de l'ISO 9241-410:2008 pour décrire les propriétés de leurs produits peuvent être utilisées pour sélectionner le dispositif approprié au contexte d'utilisation réel, déterminé par les tâches élémentaires pertinentes pour la tâche exécutée par la population d'utilisateurs spécifique. Ces données peuvent également être utilisées pour atteindre le niveau d'efficience et d'efficacité requis pour un système donné.

Ergonomija medsebojnega vpliva človek-sistem - 410. del: Merila za oblikovanje naprav za vnos podatkov (ISO 9241-410:2008)

Ta del standarda ISO 9241 določa kriterije na osnovi ergonomičnih faktorjev za načrtovanje naprav za fizični vnos podatkov za interaktivne sisteme, vključno s tipkovnicami, miškami, ploščki, igralnimi palicami, sledilnimi kroglicami, sledilnimi ploščicami, tablicami in prevlekami, zasloni na dotik, pisali ter napravami z glasovnim nadzorom in nadzorom s kretnjami. Podaja navodila za načrtovanje teh naprav, pri čemer upošteva zmožnosti in omejitve uporabnikov ter določa splošne kriterije načrtovanja za naprave za fizični vnos podatkov ter tudi določene kriterije za posamezno vrsto naprave. Zahteve za načrtovanje izdelkov so podane kot rezultat vidikov brez konteksta ali so določene na osnovi določenih kriterijev načrtovanja za predvideno uporabo; takšni določeni kriteriji so običajno razdeljeni na opravilno usmerjene kategorije, kjer je to primerno. Zahtevano kategorijo za ločljivost je mogoče določiti na osnovi lastnosti opravila, populacije uporabnikov in konteksta uporabe za predvideno uporabo. Ta del standarda ISO 9241 ne določa kategorij, ki ustrezajo napravam, ker glede na koncept uporabnosti izdelek nima temeljne uporabnosti. Izbira kategorije, ki ji pripada določena lastnost naprave, je odvisna od načrtovanja izdelka. Ta del standarda ISO 9241 naj bi uporabljali proizvajalci naprav za fizični vnos podatkov, vključno z načrtovalci izdelkov in organizatorji preskusov, in sicer za določanje lastnosti načrtovanja naprave za predviden kontekst uporabe (populacija uporabnikov, opravilo, programska oprema ali okolje itd.). Podatke ki jih generirajo uporabniki tega dela standarda ISO 9241 za opis lastnosti svojih izdelkov, je mogoče uporabiti pri izbiri naprave, ki ustreza dejanskemu kontekstu uporabe glede na osnove opravila, pomembne za opravilo določene uporabniške populacije ter za doseganje zahtevane ravni učinkovitosti in uspešnosti danega sistema.

General Information

• Status: Published
• Publication Date: 13-Feb-2008
• Withdrawal Date: 30-Aug-2008
• ICS: 13.180 - Ergonomics
• ICS: 35.180 - IT Terminal and other peripheral equipment
• Technical Committee: CEN/TC 122 - Ergonomics
• Drafting Committee: CEN/TC 122/WG 5 - Ergonomics of human-computer interaction
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 10-Apr-2009
• Completion Date: 10-Apr-2009
• Ref Project: SIST EN ISO 9241-410:2008 - Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices (ISO 9241-410:2008)

Relations

• Amended By: EN ISO 9241-410:2008/A1:2012 - Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices (ISO 9241-410:2008/AMD 1:2012)
• Effective Date: 22-Apr-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices (ISO 9241-410:2008)Ergonomie de l'interaction homme/systeme - Partie 410: Criteres de conception pour les dispositifs d'entrée physiques (ISO 9241-410:2008)Ergonomie der Mensch-System-Interaktion - Teil 410: Gestaltungskriterien für physikalische Eingabegeräte (ISO 9241-410:2008)Ta slovenski standard je istoveten z:EN ISO 9241-410:2008SIST EN ISO 9241-410:2008en,fr,de35.18013.180ICS:SLOVENSKI
STANDARDSIST EN ISO 9241-410:200801-april-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 9241-410February 2008ICS 13.180; 35.180 English VersionErgonomics of human-system interaction - Part 410: Designcriteria for physical input devices (ISO 9241-410:2008)Ergonomie de l'interaction homme-système - Partie 410:Critères de conception des dispositifs d'entrée physiques(ISO 9241-410:2008)Ergonomie der Mensch-System-Interaktion - Teil 410:Gestaltungskriterien für physikalische Eingabegeräte (ISO9241-410:2008)This European Standard was approved by CEN on 11 February 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 9241-410:2008: E

.
Reference numberISO 9241-410:2008(E)© ISO 2008
INTERNATIONAL STANDARD ISO9241-410First edition2008-02-15Ergonomics of human-system interaction — Part 410: Design criteria for physical input devicesErgonomie de l'interaction homme-système — Partie 410: Critères de conception des dispositifs d'entrée physiques

ISO 9241-410:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2008 – All rights reserved

ISO 9241-410:2008(E) © ISO 2008 – All rights reserved iiiContents Page Foreword.v Introduction.vii 1 Scope.1 2 Normative references.1 3 Terms and definitions.2 4 Procedure for applying this part of ISO 9241.4 5 Performance criterion.6 6 Properties of physical input devices relevant for usability.6 7 Generic design requirements for physical input devices.6 8 Device-specific design requirements.10 9 Documentation.11 Annex A (informative)
Overview of the ISO 9241 series.12 Annex B (normative)
Keyboards.16 Annex C (normative)
Computer mice.36 Annex D (normative)
Pucks.46 Annex E (normative)
Joysticks.54 Annex F (normative)
Trackballs.62 Annex G (normative)
Touchpads.70 Annex H (normative)
Tablets and overlays.77 Annex I (normative)
Styli and light-pens.87 Annex J (normative)
Touch-sensitive screens.93 Annex K (informative)
Designing input devices to accommodate diverse users.98 Bibliography.100

ISO 9241-410:2008(E) iv © ISO 2008 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9241-410 was prepared by Technical Committee ISO/TC 159, Ergonomics, Subcommittee SC 4, Ergonomics of human-system interaction. This first edition of ISO 9241-410, together with ISO 9241-400, ISO 9241-4111), ISO 9241-4201) and ISO 9241-4211), partially replaces ISO 9241-4:1998 and ISO 9241-9:2000, technically revised as follows: ⎯ terms and definitions from ISO 9241-4 and ISO 9241-9 have been transferred to ISO 9241-400; ⎯ all guiding principles have been incorporated into ISO 9241-400 and unified so that they correspond to the scope of the new ISO 9241 series; ⎯ these principles are applied in ISO 9241-410 in order to generate provisions for product design. ⎯ an application procedure has been specified in ISO 9241-410, for reasons related to the structure of the “400” subseries of ISO 9241 and its usability- rather than property-based nature;
⎯ for greater convenience, a separate normative annex covering each of the different devices, as well as an informative annex addressing issues related to accessibility, have been included in ISO 9241-410. ISO 9241 consists of the following parts, under the general title Ergonomic requirements for office work with visual display terminals (VDTs): ⎯ Part 1: General introduction ⎯ Part 2: Guidance on task requirements ⎯ Part 3: Visual display requirements ⎯ Part 4: Keyboard requirements ⎯ Part 5: Workstation layout and postural requirements
1) Planned or under preparation. (See Annex A)

ISO 9241-410:2008(E) © ISO 2008 – All rights reserved v⎯ Part 6: Guidance on the work environment ⎯ Part 9: Requirements for non-keyboard input devices ⎯ Part 11: Guidance on usability ⎯ Part 12: Presentation of information ⎯ Part 13: User guidance ⎯ Part 14: Menu dialogues ⎯ Part 15: Command dialogues ⎯ Part 16: Direct manipulation dialogues ⎯ Part 17: Form filling dialogues The following part is under preparation: ⎯ Part 129: Guidance on software individualization ISO 9241 also consists of the following parts, under the general title Ergonomics of human-system interaction: ⎯ Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services ⎯ Part 110: Dialogue principles ⎯ Part 151: Guidance on World Wide Web user interfaces ⎯ Part 171: Guidance on software accessibility ⎯ Part 300: Introduction to electronic visual display requirements ⎯ Part 302: Terminology for electronic visual displays ⎯ Part 303: Requirements for electronic visual displays ⎯ Part 304: User performance test methods ⎯ Part 305: Optical laboratory test methods for electronic visual displays ⎯ Part 306: Field assessment methods for electronic visual displays ⎯ Part 307: Analysis and compliance test methods for electronic visual displays
⎯ Part 308: Surface-conduction electron-emitter displays (SED) [Technical Report] ⎯ Part 400: Principles and requirements for physical input devices ⎯ Part 410: Design criteria for physical input devices ⎯ Part 920: Guidance on tactile and haptic interactions Framework for tactile and haptic interaction is to form the subject of a future part 910.

ISO 9241-410:2008(E) vi © ISO 2008 – All rights reserved Introduction Input devices are a means for users to enter data into interactive systems. Generally speaking, an input device is a sensor that can detect changes in user behaviour (gestures, moving fingers, etc.) and transform it into signals to be interpreted by the interactive system. An input device is regarded as the combination of hardware with the software designed to use it (e.g. a driver). This part of ISO 9241 defines design criteria for products on the basis of relevant properties of physical input devices as laid down in ISO 9241-400:2007. It is intended to cover assessment methods for laboratory use (in order to accelerate future development of test and evaluation methods) and user organizations in future parts of ISO 9241. Most of the principles presented in this part of ISO 9241 have previously been defined or outlined in International Standards for keyboards and other input devices (ISO 9241-4 and ISO 9241-9). Where necessary, definitions of terms have been reformulated so that they are applicable for all input devices. ISO 9241 was originally developed as a seventeen-part International Standard on the ergonomics requirements for office work with visual display terminals. As part of the standards review process, a major restructuring of ISO 9241 was agreed to broaden its scope, to incorporate other relevant standards and to make it more usa
...