EN 12697-33:2003

Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor

This European Standard specifies the methods for compacting parallelepipedic specimens (slabs) of bituminous mixtures, to be used directly for subsequent testing, or from which test specimens are cut. For a given mass of bituminous mixture, the specimens can be prepared either under controlled compaction energy, or until a specified volume and therefore bulk density are obtained. This standard is applicable to bituminous mixtures manufactured in the laboratory or in a mixing plant.

Asphalt - Prüfverfahren für Heißasphalt - Teil 33: Probestückvorbereitung mit einem Walzenverdichtungsgerät

Diese Europäische Norm legt die Verfahren fest für die Verdichtung von planparallelen Probekörpern (Platten) aus Asphalt, die für nachfolgende Prüfungen direkt verwendet oder aus denen Prüfkörper geschnitten werden können. Von einer vorgegebenen Asphaltmasse können Probekörper entweder mit einer gesteuerten Verdichtungsenergie oder mit einem bestimmten Volumen und infolgedessen einer bestimmten Raumdichte hergestellt werden.

Mélange bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 33: Confection d'éprouvettes au compacteur de plaque

La présente norme européenne définit les méthodes de compactage des éprouvettes parallélépipédiques (plaques) de mélanges bitumineux, qui doivent être utilisées directement ou pour des essais ultérieurs ou à partir desquelles des éprouvettes sont prélevées. Pour une masse donnée de mélange bitumineux, les éprouvettes peuvent être préparées soit à une énergie de compactage contrôlée, soit à volume spécifié, et par conséquent à masse volumique apparente spécifiée. La présente norme s'applique aux mélanges bitumineux fabriqués en laboratoire ou dans une centrale d'enrobage.

Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 33. del: Preskušanci, pripravljeni z valjastim zgoščevalnikom

General Information

• Status: Withdrawn
• Publication Date: 16-Dec-2003
• Withdrawal Date: 03-Jul-2007
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Jul-2007
• Completion Date: 04-Jul-2007
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 12697-33:2004 - Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor

Relations

• Merged Into: EN 12697-33:2003+A1:2007 - Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactorMélange bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 33: Confection d'éprouvettes au compacteur de plaqueAsphalt - Prüfverfahren für Heißasphalt - Teil 33: Probestückvorbereitung mit einem WalzenverdichtungsgerätTa slovenski standard je istoveten z:EN 12697-33:2003SIST EN 12697-33:2004en93.080.20Materiali za gradnjo cestRoad construction materialsICS:SLOVENSKI
STANDARDSIST EN 12697-33:200401-junij-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-33December 2003ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part33: Specimen prepared by roller compactorMélange bitumineux - Méthodes d'essai pour mélangehydrocarboné à chaud - Partie 33: Confection d'éprouvettesau compacteur de plaqueAsphalt - Prüfverfahren für Heißasphalt - Teil 33:Probestückvorbereitung mit einemWalzenverdichtungsgerätThis European Standard was approved by CEN on 3 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-33:2003 E



EN 12697-33:2003 (E)2ContentsPageForeword.31Scope.62Normative references.63Terms, definitions, symbols and abbreviations.63.1Terms and definitions.63.2Symbols and abbreviations.74Principle.85Apparatus.85.1Method using a wheel or two wheels fitted with pneumatic tyres.85.2Methods using a smooth steel roller.95.2.1Smooth steel roller.95.2.2Steel roller used on wheel fitted with pneumatic tyres.105.3Method using a roller running on vertical sliding steel plates.106Preparation.116.1Mass of bituminous mixture.116.2Filling the mould.117Compaction procedure.127.1Method using wheels fitted with pneumatic tyres.127.1.1Test conditions.
...