FprEN ISO 11074
(Main)Soil quality - Vocabulary (ISO/FDIS 11074:2024)
Soil quality - Vocabulary (ISO/FDIS 11074:2024)
Bodenbeschaffenheit - Wörterbuch (ISO/FDIS 11074:2024)
Qualité du sol - Vocabulaire (ISO/FDIS 11074:2024)
Kakovost tal - Slovar (ISO/DIS 11074:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2023
Kakovost tal - Slovar (ISO/DIS 11074:2023)
Soil quality - Vocabulary (ISO/DIS 11074:2023)
Bodenbeschaffenheit - Wörterbuch (ISO/DIS 11074:2023)
Qualité du sol - Vocabulaire (ISO/DIS 11074:2023)
Ta slovenski standard je istoveten z: prEN ISO 11074
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.080.01 Kakovost tal in pedologija na Soil quality and pedology in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11074
ISO/TC 190 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-02-13 2023-05-08
Soil quality — Vocabulary
Qualité du sol — Vocabulaire
ICS: 01.040.13; 13.080.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11074:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
ISO/DIS 11074:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11074
ISO/TC 190 Secretariat: DIN
Voting begins on: Voting terminates on:
Soil quality — Vocabulary
Qualité du sol — Vocabulaire
ICS: 01.040.13; 13.080.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 11074:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
ISO/DIS 11074:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Terms and definitions . 1
Annex A (informative) Relationships between sampling operations .64
Bibliography .66
iii
ISO/DIS 11074:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 190, Soil quality.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/DIS 11074:2022(E)
Introduction
This vocabulary gives soil quality terms and their definitions. The previous versions of the vocabular
(ISO 11074:2015 and ISO 11074/Amd.1:2020) presented terms and definitions in separate clauses to
differentiate the terms about e.g., sampling, remediation, etc. This became more and more artificial,
since soil quality experts with different expertise need to work closely together and there is a greater
need for one term list instead of multiple ones, where experts first must find out in which sublist of
the International Standard the specific term could be found. In this new version of the International
Standard the terms are presented in one alphanumeric list.
For some terms, there are different definitions, depending on the context. These terms are presented
after each other, with the differentiating scopes between brackets: . Often this will be a
general and a specific scope, resulting in different definitions.
Though the terms apply for all other ISO/TC 190 Soil quality standards and most terms and definitions
from other ISO/TC 190 Soil quality standards are present in ISO 11074, not all terms and definitions are
taken onboard.
New and revised standards are published continuously though time. The revision periods of soil quality
standards defer. That means that, even if working groups work closely together, definitions of the same
terms can be different in specific soil quality standard and this vocabulary standard.
v
DRAFT INTERNATIONAL STANDARD ISO/DIS 11074:2022(E)
Soil quality — Vocabulary
1 Scope
This International Standard defines a list of terms used in the preparation of the standards in the field
of soil quality.
Some terms can have different definitions depending on the context. If so, the context of the term is
given as .
NOTE 1 See also the ISO online browsing platform (OBP): www .iso .org/ obp/ ui/
NOTE 2 For general terms relating to quality, see ISO 8402.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
2.1
abandoned hazardous site
hazardous site left by the owner or other responsible party in unmanaged condition
2.2
abandoned industrial site
industrial site left by the owner or other responsible party in unmanaged condition
2.3
abandoned potentially hazardous site
abandoned site whose history leads to a suspicion that it can be hazardous
2.4
abandoned waste disposal site
waste disposal site left by the owner or other responsible party in unmanaged condition
2.5
abiotic decomposition
decomposition by physical and/or chemical processes (e.g. photolysis, hydrolysis, oxidation, and
reduction)
2.6
abiotic degradation
degradation by physical and/or chemical processes
2.7
above-ground sampling
process of taking samples from material that has been deposited on the ground surface
EXAMPLE Samples are taken from a stockpile (including bulk volumes of excavated soils), deposit of waste
or embankment.
[SOURCE: ISO 18400-104:2018, 3.1]
ISO/DIS 11074:2022(E)
2.8
accumulation
increase of the concentration of a substance in soil due to the fact that the substance input is larger than
the substance output
Note 1 to entry: Substance output includes material which is degraded substances.
2.9
active protective measure
process designed, for example, to control groundwater or gas migrations
EXAMPLE Pumped water extraction or gas extraction system.
2.10
active soil-gas sampling
sampling by extracting a certain volume of soil gas
2.11
actual increment size
amount of material that is present in an increment
Note 1 to entry: See increment (2.217)
2.12
actual sample size
amount of material that is present in the sample
2.13
aerobic
descriptive of a condition with molecular oxygen available
2.14
aerobic biological treatment
biological treatment in the presence of oxygen
2.15
aerobic
descriptive of a condition with molecular oxygen available
2.16
aftercare management
measures applied on completion of remedial works or as an integral part of a containment strategy to
ensure continued effectiveness over the long-term
2.17
aggressive soil conditions
soil conditions potentially damaging to buildings and construction materials
2.18
air-sparging
introduction of air under pressure into the groundwater
2.19
aliphatic hydrocarbon
acyclic or cyclic, saturated or unsaturated carbon compound, excluding aromatic compounds
[SOURCE: ISO 11504:2012]
ISO/DIS 11074:2022(E)
2.20
aliquot
known amount of a homogeneous material, assumed to be taken with negligible sampling error
Note 1 to entry: The term is usually applied to fluids.
2.21
ammonification
microbial degradation of organic nitrogen to ammonia
2.22
amplicon
PCR product obtained by PCR from a template
Note 1 to entry: DNA fragment or RNA fragment amplified by PCR (Polymerase Chain Reaction)
[SOURCE: ISO 17601:2016]
2.23
anaerobic
descriptive of a condition in which molecular oxygen is not available
[SOURCE: ISO 17601:2016]
2.24
anaerobic biological treatment
biological treatment in the absence of gaseous or soluble oxygen
2.25
anaerobic transformation
reactions occurring under exclusion of oxygen (reducing conditions)
Note 1 to entry: These generally occur when the redox potential (Eh) is less than 200 mV.
2.26
analytical and testing strategy
plan comprising the samples to be analysed or tested, the parameters to be measured, sample
preparation methods, and the analytical or testing methods to be employed
Note 1 to entry: There should be associated quality assurance methods.
2.27
analytical sample
portion of material, resulting from the original sample or composite sample by means of an appropriate
method of sample pretreatment and having the size (volume/mass) necessary for the desired testing or
analysis
2.28
anisotropy
property of a soil or other volume of material to have different spatial variation structures depending
on direction and distance
Note 1 to entry: Usually illustrated in a variogram.
2.29
anthropogenic change
influence on soil properties caused by human activities
ISO/DIS 11074:2022(E)
2.30
anthropogenic concentration
concentration of a substance in a soil resulting from anthropogenic origin
[SOURCE: ISO 19258:2018]
2.31
anthropogenic ground
deposits which have accumulated through human activity
Note 1 to entry: These could consist of natural materials placed/replaced by man, e.g. clay, or man-made
materials, e.g. refuse.
[SOURCE: ISO 18400-104:2018, 3.2]
2.32
aromatic hydrocarbon
hydrocarbon of which the molecular structure incorporates one or more planar sets of six carbon atoms
that are connected by delocalized electrons, numbering the same as if they consisted of alternating
single and double covalent b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.