EN ISO/IEC 15415:2005

Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbols (ISO/IEC 15415:2004)

ISO/IEC 15415:2004(E) specifies two methodologies for the measurement of specific attributes of two-dimensional bar code symbols, one of these being applicable to multi-row bar code symbologies and the other to two-dimensional matrix symbologies; defines methods for evaluating and grading these measurements and deriving an overall assessment of symbol quality; and gives information on possible causes of deviation from optimum grades to assist users in taking appropriate corrective action.
ISO/IEC 15415:2004(E) applies to those two-dimensional symbologies for which a reference decode algorithm has been defined, but its methodologies can be applied partially or wholly to other similar symbologies.

Informationstechnik - Automatische Identifikation und Datenerfassungsverfahren - Testspezifikation für Strichcode-Druckqualität - 2D-Symbole (ISO/IEC 15415:2004)

Technologies de l'information - Techniques automatiques d'identification et de capture des données - Spécification de test de qualité d'impression des symboles de code à barres - Symboles bi-dimensionnels (ISO/IEC 15415:2004)

Informacijska tehnologija – Tehnike za samodejno razpoznavanje in zajem podatkov – Specifikacija za preskušanje kakovosti tiska črtnih kod – Dvodimenzionalni simboli (ISO/IEC 15415:2004)

General Information

• Status: Withdrawn
• Publication Date: 27-Sep-2005
• Withdrawal Date: 01-Mar-2016
• ICS: 35.040 - Information coding
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: CEN/TC 225 - AIDC technologies
• Drafting Committee: CEN/TC 225 - AIDC technologies
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 02-Mar-2016
• Ref Project: SIST EN ISO/IEC 15415:2006 - Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbols (ISO/IEC 15415:2004)

Relations

• Corrected By: EN ISO/IEC 15415:2005/AC:2011 - Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbols - Technical Corrigendum 1 (ISO/IEC 15415:2004/Cor 1:2008)
• Effective Date: 26-Feb-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO/IEC 15415:2006
01-april-2006
,QIRUPDFLMVNDWHKQRORJLMD±7HKQLNH]DVDPRGHMQRUD]SR]QDYDQMHLQ]DMHP
SRGDWNRY±6SHFLILNDFLMD]DSUHVNXãDQMHNDNRYRVWLWLVNDþUWQLKNRG±
'YRGLPHQ]LRQDOQLVLPEROL,62,(&
Information technology - Automatic identification and data capture techniques - Bar code
print quality test specification - Two-dimensional symbols (ISO/IEC 15415:2004)
Informationstechnik - Automatische Identifikation und Datenerfassungsverfahren -
Testspezifikation für Strichcode-Druckqualität - 2D-Symbole (ISO/IEC 15415:2004)
Technologies de l'information - Techniques automatiques d'identification et de capture
des données - Spécification de test de qualité d'impression des symboles de code a
barres - Symboles bi-dimensionnels (ISO/IEC 15415:2004)
Ta slovenski standard je istoveten z: EN ISO/IEC 15415:2005
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
SIST EN ISO/IEC 15415:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO/IEC 15415:2006

---------------------- Page: 2 ----------------------

SIST EN ISO/IEC 15415:2006
EUROPEAN STANDARD
EN ISO 15415
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 35.040

English Version
Information technology - Automatic identification and data
capture techniques - Bar code print quality test specification -
Two-dimensional symbols (ISO/IEC 15415:2004)
Technologies de l'information - Techniques automatiques Informationstechnik - Automatische Identifikation und
d'identification et de capture des données - Spécification de Datenerfassungsverfahren - Testspezifikation für
test de qualité d'impression des symboles de code à barres Strichcode-Druckqualität - 2D-Symbole (ISO/IEC
- Symboles bi-dimensionnels (ISO/IEC 15415:2004) 15415:2004)
This European Standard was approved by CEN on 26 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15415:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO/IEC 15415:2006
EN ISO/IEC 15415:2005 (E)







Foreword


The text of ISO/IEC 15415:2004 has been prepared by Technical Committee ISO/IEC/JTC 1
"Information technology" of the International Organization for Standardization (ISO) and the
International Electrotechnical Commission (IEC) has been taken over as EN ISO/IEC
15415:2005 by Technical Committee CEN/TC 225 "AIDC technologies", the secretariat of which
is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2006, and conflicting national
standards shall be withdrawn at the latest by March 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO/IEC 15415:2004 has been approved by CEN as EN ISO/IEC 15415:2005 without
any modifications.


2

---------------------- Page: 4 ----------------------

SIST EN ISO/IEC 15415:2006

---------------------- Page: 5 ----------------------

SIST EN ISO/IEC 15415:2006


INTERNATIONAL ISO/IEC
STANDARD 15415
First edition
2004-06-15


Information technology — Automatic
identification and data capture
techniques — Bar code print quality test
specification — Two-dimens
...