iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 2310:1991

(Main)

Aerospace series - Test methods for the flame resistance rating of non-metallic materials

Aerospace series - Test methods for the flame resistance rating of non-metallic materials

This standard defines the test methods for the flame resistance rating of non-metallic materials. It applies exclusively to materials whose specific standard requires this type of test. It cannot be substituted for the statutory test required for a final specific use of the material concerned.

Luft- und Raumfahrt - Prüfverfahren zur Klassifizierung des Brandverhaltens von nichtmetallischen Werkstoffen

Diese Norm legt die Prüfverfahren zur Klassifizierung des Brandverhaltens von nichtmetallischen Werkstoffen fest. Sie ist nur bei Werkstoffen anzuwenden, deren Einzelnorm diese Prüfart vorsieht. Sie darf nicht an die Stelle der für eine spezielle Endverwendung des betroffenen Werkstoffes erforderlichen gesetzlich vorgeschriebenen Prüfungen treten.

Série aérospatiale - Méthodes d'essai de comportement au feu pour le classement des matériaux non métalliques

La présente norme définit les méthodes d'essai de comportement au feu pour le classement de matériaux non métalliques. Elle s'applique exclusivement aux matériaux dont la norme particulière exige ce type d'essai. Elle ne saurait se substituer aux essais réglementaires requis pour une utilisation spécifique finale du matériau concerné.

Aerospace series - Test methods for the flame resistance rating of non-metallic materials

General Information

Status
Published
Publication Date
12-Mar-1991
Withdrawal Date
12-Sep-1991
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
49.025.99 - Other materials
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 4 - Metallic
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
01-Jun-2017
Ref Project
SIST EN 2310:2001 - Aerospace series - Test methods for the flame resistance rating of non-metallic materials

Buy Standard

EN 2310:2001EN 2310:2001
PreviousNext
Standard
EN 2310:2001
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Test methods for the flame resistance rating of non-metallic materialsLuft- und Raumfahrt - Prüfverfahren zur Klassifizierung des Brandverhaltens von nichtmetallischen WerkstoffenSérie aérospatiale - Méthodes d'essai de comportement au feu pour le classement des matériaux non métalliquesAerospace series - Test methods for the flame resistance rating of non-metallic materials49.025.99Drugi materialiOther materials13.220.40Sposobnost vžiga in obnašanje materi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 2824:2011(Main)
Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media
SIST EN 2824:2012

This standard defines the test equipment, apparatus and media required for determination of the smoke density according to EN 2825 and the concentration of the gas components in the smoke according to EN 2826 due to pyrolitic decomposition of solid materials and composite materials of up to 25 mm in thickness under the influence of radiant heat only or with simultaneous flame application.
This test method applies exclusively to materials whose specific standard requires this type of test. It cannot be substituted for the statutory tests required for a final specific use of the material concerned.
NOTE   The smoke gas density and the gas components in the smoke are determined according to the specific environmental and test conditions defined in this standard, in EN 2825 and EN 2826. No studies have been made up to now to determine whether the results can be transferred to differing conditions, particularly to actual fire conditions. The inhalatory toxical risk and irritancy affect cannot be assessed by merely measuring the concentration of individual gas components in the smoke.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2825:2011(Main)
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density
SIST EN 2825:2011

This European Standard defines a test method for determination of the smoke density due to pyrolitic decomposition of solid materials and composite materials of up to 25 mm in thickness under the influence of radiant heat only or with simultaneous flame application.
The test results enable a comparison of the smoke production of different materials or material configurations under the conditions specified in this standard.
NOTE 1   The smoke gas density is determined according to the specific environmental and test conditions defined in EN 2824 and this standard. No studies have been made up to now to determine whether the results can be transferred to differing conditions, particularly to actual fire conditions.
NOTE 2   The burning behaviour - and consequently the smoke density - of aerospace materials are not only influenced by the type of material but also to a large extent by the configuration, the specific surface and mass, the combination with other materials, the means of joining as well as the processing technique.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2826:2011(Main)
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke
SIST EN 2826:2011

This European Standard defines a test method to determine the concentration of certain gas components due to pyrolitic decomposition of solid materials and composite materials under the influence of radiant heat only or with simultaneous flame application.
NOTE 1   The gas components in the smoke are determined according to the specific environmental and test conditions defined in EN 2824 and this standard. No studies have been made up to now to determine whether the results can be transferred to different conditions, particularly to actual fire conditions. The inhalatory toxical risk and irritancy affect cannot be assessed by merely measuring the concentration of individual gas components in the smoke.
NOTE 2   The burning behaviour and consequently the gas components in the smoke of aerospace materials are not only influenced by the type of material but also to a large extent by the configuration, the specific surface and mass, the combination with other materials, the means of joining as well as the processing technique.
NOTE 3   These influences shall be taken into account in the preparation of tests, the selection of test specimens and the interpretation of test results.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2824:2011(Main)
Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media
SIST EN 2824:2012

This standard defines the test equipment, apparatus and media required for determination of the smoke density according to EN 2825 and the concentration of the gas components in the smoke according to EN 2826 due to pyrolitic decomposition of solid materials and composite materials of up to 25 mm in thickness under the influence of radiant heat only or with simultaneous flame application.
This test method applies exclusively to materials whose specific standard requires this type of test. It cannot be substituted for the statutory tests required for a final specific use of the material concerned.
NOTE   The smoke gas density and the gas components in the smoke are determined according to the specific environmental and test conditions defined in this standard, in EN 2825 and EN 2826. No studies have been made up to now to determine whether the results can be transferred to differing conditions, particularly to actual fire conditions. The inhalatory toxical risk and irritancy affect cannot be assessed by merely measuring the concentration of individual gas components in the smoke.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2825:2011(Main)
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density
SIST EN 2825:2011

This European Standard defines a test method for determination of the smoke density due to pyrolitic decomposition of solid materials and composite materials of up to 25 mm in thickness under the influence of radiant heat only or with simultaneous flame application.
The test results enable a comparison of the smoke production of different materials or material configurations under the conditions specified in this standard.
NOTE 1   The smoke gas density is determined according to the specific environmental and test conditions defined in EN 2824 and this standard. No studies have been made up to now to determine whether the results can be transferred to differing conditions, particularly to actual fire conditions.
NOTE 2   The burning behaviour - and consequently the smoke density - of aerospace materials are not only influenced by the type of material but also to a large extent by the configuration, the specific surface and mass, the combination with other materials, the means of joining as well as the processing technique.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2826:2011(Main)
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke
SIST EN 2826:2011

This European Standard defines a test method to determine the concentration of certain gas components due to pyrolitic decomposition of solid materials and composite materials under the influence of radiant heat only or with simultaneous flame application.
NOTE 1   The gas components in the smoke are determined according to the specific environmental and test conditions defined in EN 2824 and this standard. No studies have been made up to now to determine whether the results can be transferred to different conditions, particularly to actual fire conditions. The inhalatory toxical risk and irritancy affect cannot be assessed by merely measuring the concentration of individual gas components in the smoke.
NOTE 2   The burning behaviour and consequently the gas components in the smoke of aerospace materials are not only influenced by the type of material but also to a large extent by the configuration, the specific surface and mass, the combination with other materials, the means of joining as well as the processing technique.
NOTE 3   These influences shall be taken into account in the preparation of tests, the selection of test specimens and the interpretation of test results.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-8:2024(Main)
Electronic invoicing - Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice
kSIST FprEN 16931-8:2024

This document establishes a semantic data model of an e-receipt or a simplified electronic invoice.
NOTE   In the remainder of this document, when “e-receipt” is mentioned, “simplified invoice” is also meant.
The semantic model includes essential information elements that an electronic receipt needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and domestic trade. The semantic model can be used by organizations in the private and the public sector for documenting by issuing a receipt for the purchase of services and /or goods. It can also be used for documenting a purchase between private sector enterprises. In addition, it has been designed for the use of consumers.

  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-5:2024(Main)
Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2024)
kSIST FprEN ISO 19403-5:2024

This document specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
If applied to liquids with non-Newtonian flow behaviour (see ISO 3219-1:2021, 3.22), restrictions can apply.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16286-1:2024(Main)
Railway applications - Gangway systems between vehicles - Part 1: Main applications
SIST EN 16286-1:2024

This document specifies the technical and safety requirements applicable to gangway systems used in heavy rail and urban rail vehicles that are designed to allow passengers or staff to move between adjacent vehicles.
It also specifies:
- the requirements for the safety for passengers and/or staff in the gangway while the train is running,
- the assessment methods as well as pass/fail criteria for gangways installed on vehicles.
NOTE Some requirements in this document may not be applicable for gangways designed for use by staff only.
This document is not intended to specify requirements for articulation systems which can be an integral part of gangway systems.
This document is not applicable for rubber tube gangways and interconnecting gangways for coaches travelling at speeds of up to 200 km/h on high-speed lines with tunnel sections. Information about these types of gangway systems are given in Annex A and Annex B.

  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17966:2024(Main)
Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified)
SIST EN 17966:2024

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems.
Design of systems where unclosable opening(s) of the protected volume exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day