iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 2538:2003

(Main)

Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998)

Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998)

Geometrische Produktspezifikation (GPS) - Reihen von Winkeln und Neigungen an Prismen (ISO 2538:1998)

Spécification géométrique des produits (GPS) - Séries d'angles et d'inclinaisons de prismes (ISO 2538:1998)

La présente Norme internationale spécifie deux séries d'angles de prismes allant de 120° à 0°30'et une série d'inclinaisons de prismes allant de 1:10 à 1:500, à l'usage de la mécanique générale.

Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998)

General Information

Status
Withdrawn
Publication Date
18-Feb-2003
Withdrawal Date
02-Sep-2014
ICS
17.040.01 - Linear and angular measurements in general
Technical Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Drafting Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
03-Sep-2014
Ref Project
SIST EN ISO 2538:2004 - Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998)

Relations

Replaced By
EN ISO 2538-2:2014 - Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
Effective Date
08-Jun-2022
Replaced By
EN ISO 2538-1:2014 - Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 2538:2004EN ISO 2538:2004
PreviousNext
Standard
EN ISO 2538:2004
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2538:2004
01-maj-2004
Geometrical product specfications (GPS) - Series of angles and slopes on prisms
(ISO 2538:1998)
Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO
2538:1998)
Geometrische Produktspezifikation (GPS) - Reihen von Winkeln und Neigungen an
Prismen (ISO 2538:1998)
Spécification géométrique des produits (GPS) - Séries d'angles et d'inclinaisons de
prismes (ISO 2538:1998)
Ta slovenski standard je istoveten z: EN ISO 2538:2003
ICS:
17.040.01 Linearne in kotne meritve na Linear and angular
splošno measurements in general
SIST EN ISO 2538:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2538:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 2538:2004
EUROPEAN STANDARD
EN ISO 2538
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2003
ICS 17.040.01
English version
Geometrical product specfications (GPS) - Series of angles and
slopes on prisms (ISO 2538:1998)
Spécification géométrique des produits (GPS) - Séries Geometrische Produktspezifikation (GPS) - Reihen von
d'angles et d'inclinaisons de prismes (ISO 2538:1998) Winkeln und Neigungen an Prismen (ISO 2538:1998)
This European Standard was approved by CEN on 15 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2538:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2538:2004
EN ISO 2538:2003 (E)
Foreword
The text of ISO 2538:1998 has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" of the International
Organization for Standardization (ISO) and has been taken over as EN ISO 2538:2003 by
Technical Committee CEN/TC 290 "Dimensional and geometrical product specification and
verification", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by August 2003, and conflicting national
standards shall be withdrawn at the latest by August 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden,
Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2538:1998 has been approved by CEN as EN ISO 2538:2003 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 2538:2004
INTERNATIONAL ISO
STANDARD 2538
Second edition
1998-09-15
Geometrical Product Specifications
(GPS) — Series of angles and slopes on
prisms
Spécification géométrique des produits (GPS) — Séries d'angles et
d'inclinaisons de prismes
A
Reference number
ISO 2538:1998(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 2538:2004
ISO 2538:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO collab-
orates closely with the International Electrotechnical Commission (IEC) on
all matters of electrotechnical standardization.
Draft International Standards adopted by the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 1:2022(Main)
Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
SIST EN ISO 1:2022

This document defines the concepts of a reference temperature and the standard reference temperature and specifies the standard reference temperature value for the specification of geometrical and dimensional properties of an object. Some examples of geometrical and dimensional properties include size, location, orientation (including angle), form and surface texture of a workpiece.
This document is also applicable to the definition of the measurand used in verification or calibration.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21204:2020(Main)
Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)
SIST EN ISO 21204:2020

This document defines a number of specification operators for the specification of extended edge transition features between features. An edge transition feature is an integral feature connecting two adjacent integral features. The extended edge transition feature includes portions of the adjacent features. All these specifications apply to any line in a defined direction in the extended edge transition feature. This document also defines the specification modifiers and the drawing indications for such transition specifications.
The proportions and dimensions of the graphical symbols to be used are also specified.
The specifications defined in this document are suitable for relatively simple edge transition functions, for example ensuring assembly without interference. For more complex functions, geometrical tolerancing offers more precise tools.
This document is by intention limited to only edge transition features between two planes and between a cylinder and a plane nominally perpendicular to it.
Annex A gives the first approach for an algorithm to identify toleranced features and adjacent reference sections. This algorithm is subject to change as more experience is gathered.
This document provides a set of tools to express several transition specifications. It does not present any information on the relationship between a function or a use and a transition specification.
NOTE 1  Corners (the transition between three or more features) are not edge transition features and are consequently not covered by this document.
NOTE 2  An edge transition feature exists between two single features. A defined edge transition feature has a defined nominal shape and is not sharp (r = 0).

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20170:2019(Main)
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
SIST EN ISO 20170:2019

This document describes principles and tools to control a manufacturing process in accordance with a GPS specification. For this purpose a set of one or more complementary, independent characteristics (size, form, orientation, and location characteristics independent to each other) that correlate to the manufacturing process parameters and to the manufacturing process coordinate system established from the manufacturing datum system are used.
This document describes the concept of decomposition of the macro-geometrical part of the GPS specification. It does not cover the micro-geometry, i.e. surface texture.
The objective of the decomposition presented in this document is to define correction values for manufacturing control or to perform a statistical analysis of the process.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-4:2018(Main)
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
SIST EN ISO 17450-4:2018

ISO 17450-4:2017 specifies general rules for quantifying GPS deviations for individual GPS characteristics.
NOTE       GPS deviations can be local or global. A GPS characteristic defined from local GPS deviations is a parameter that transforms the set of local deviations into a global characteristic using a quantifying function (for more details, see Table 1).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14253-1:2017(Main)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
SIST EN ISO 14253-1:2018

ISO 14253-1:2017 establishes the rules for verifying the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or with a given maximum permissible errors for a metrological characteristic of a measuring equipment, including when the measured value falls close to the specification limits, taking measurement uncertainty into account.
ISO 14253-1:2017 applies to specifications defined in general GPS standards (see ISO 14638), i.e. standards prepared by ISO/TC 213, including:
-      workpiece specifications and population specifications (usually given as an upper specification limit or a lower specification limit or both);
-      measuring equipment specifications (usually given as maximum permissible errors).
ISO 14253-1:2017 only applies for characteristics and maximum permissible errors expressed as quantity values.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18391:2016(Main)
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
SIST EN ISO 18391:2017

ISO 18391:2016 defines rules to establish and to indicate population specifications, which are used to specify conditions on population characteristics, which are established from a set of characteristic values obtained one on each workpiece of a population of workpieces.
A population specification (as applied to a population of workpieces considered as a collection and not as individual items) can be seen as a complementary requirement to the individual specification (as applied to each workpiece considered as individual items). Population specifications express the statistical hypotheses used on the population of workpieces.
NOTE 1       A population specification is a complement to an individual GPS specification.
NOTE 2       ISO 18391:2016 is not intended to mandate a given tolerancing method or how to calculate tolerance values. Its intent is to specify tools to allow the expression of population specifications.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-3:2016(Main)
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
SIST EN ISO 17450-3:2016

ISO 17450-3:2016 gives default definitions for the extracted features (integral or derived) of workpieces, which are toleranced features in GPS specifications (dimensional, geometrical, or surface texture specifications). This part of ISO 17450 defines default geometrical features used to define GPS characteristics.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14253-5:2015(Main)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
SIST EN ISO 14253-5:2015

ISO 14253-5:2015 specifies concepts and terms for evaluating the uncertainties of the test values derived according to a test protocol agreed upon by the parties and relative to instrument indication(s), obtained in verification testing of GPS indicating measuring instruments.
NOTE          The uncertainty of the test values, referred to as test value uncertainty, is not to be confused with the measurement uncertainty associated with using that indicating measuring instrument to measure workpieces. The former only is covered in this part of ISO 14253; for guidance on the latter see the ISO/IEC Guide 98‑3 (GUM) and ISO 14253‑2.
When a test of an indicating measuring instrument comprises several test values, some relative to the instrument indication and some to other metrological characteristics, this part of ISO 14253 is concerned with the uncertainty of the former only.
This part of ISO 14253 does not provide guidelines to ensure the adequacy of a test protocol; rather, once a test protocol is given, it describes how to evaluate the consequent test value uncertainty.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14638:2015(Main)
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
SIST EN ISO 14638:2015

ISO 14638:2014 is a fundamental ISO GPS standard. It explains the concept of Geometrical Product Specification (ISO GPS), and provides a framework to illustrate how current and future ISO GPS standards address the requirements of the ISO GPS system.
The framework is intended to be of use to users of ISO GPS standards, by illustrating the extent of the scope of the different standards, and showing how they relate to each other.
The framework is also used for structuring the development of standards for GPS by technical committee ISO/TC 213.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2538-1:2014(Main)
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
SIST EN ISO 2538-1:2014

ISO 2538-1:2014 specifies terms and definitions for wedges, three series of wedge angles from 120° to 0° 30′ and a series of wedge slopes from 1:10 to 1:500, for general mechanical engineering purposes.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day