EN 16002:2010

Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

This European Standard specifies a test method to determine the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing.
The assessment is limited to the performance of the mechanically fastened flexible sheets only. The test method does not include the determination of the performance of the mechanical fastener and/or the combination of the mechanical fastener and the substrate.

Abdichtungsbahnen - Bestimmung des Widerstandes gegen Windlast von mechanisch befestigten Dachabdichtungsbahnen

Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Windlastbeständigkeit mechanisch befestigter Dachabdichtungsbahnen fest.
Die Bewertung wird ausschließlich auf die Leistung der mechanisch befestigten Abdichtungsbahnen begrenzt. Das Prüfverfahren schließt weder die Bestimmung der Leistung der mechanischen Befestigung noch die Kombination aus der mechanischen Befestigung und dem Trägermaterial ein.

Feuilles souples d'étanchéité - Feuilles bitumineuses, en plastique et en caoutchouc destinées à assurer l'étanchéité des toitures - Détermination de la résistance à l'arrachement au vent

Cette norme européenne donne une méthode d'essai pour déterminer la résistance au vent des systèmes de
feuilles souples fixées mécaniquement d’étanchéité de toiture.
L’évaluation se limite à la performance des feuilles souples fixées mécaniquement. La méthode d'essai
n’inclut ni la détermination des caractéristiques de la fixation mécanique ni celle de l’ancrage de cette fixation
dans l’élément porteur.

Hidroizolacijski trakovi - Določanje odpornosti mehansko pritrjenih hidroizolacijskih trakov za tesnjenje streh proti obremenitvi z vetrom

Ta evropski standard določa preskusno metodo za določanje odpornosti mehansko pritrjenih hidroizolacijskih trakov za tesnjenje proti obremenitvi z vetrom. Ocena je omejena samo na delovanje mehansko pritrjenih trakov. Preskusna metoda ne vsebuje določanja delovanje mehanskih sponk in/ali kombinacije mehanske sponke in substrata.

General Information

• Status: Withdrawn
• Publication Date: 18-May-2010
• Withdrawal Date: 11-Dec-2018
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/WG 3 - Material properties relevant to wind uplift resistance
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-Dec-2018
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN 16002:2010 - Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

Relations

• Replaced By: EN 16002:2018 - Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
• Effective Date: 24-Jun-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LKHWURPAbdichtungsbahnen - Bestimmung des Widerstandes gegen Windlast von mechanisch befestigten DachabdichtungsbahnenFeuilles souples d'étanchéité - Feuilles bitumineuses, en plastique et en caoutchouc destinées à assurer l'étanchéité des toitures - Détermination de la résistance à l'arrachement au ventFlexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 16002:2010SIST EN 16002:2010en,fr,de01-oktober-2010SIST EN 16002:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16002
May 2010 ICS 91.100.50 English Version
Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
Feuilles souples d'étanchéité - Feuilles bitumineuses, en plastique et en caoutchouc destinées à assurer l'étanchéité des toitures - Détermination de la résistance à l'arrachement au vent
Abdichtungsbahnen - Bestimmung des Widerstandes gegen Windlast von mechanisch befestigten Dachabdichtungsbahnen This European Standard was approved by CEN on 23 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16002:2010: ESIST EN 16002:2010

2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10346:2009, Continuously hot-dip coated steel flat products — Technical delivery conditions EN 13162, Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification EN 13416, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Rules for sampling EN 13707:2004+A2:2009, Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics EN 13956:2005, Flexible sheet for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics ETAG 006:2000, Guideline for European Technical Approval systems of systems mechanically fastened flexible roof waterproofing membranes 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13707:2004+A2:2009 and EN 13956:2005 and the following apply. 3.1 fastener object to fasten the flexible sheet to a structural deck NOTE A fastener may be made of a washer, a metal sleeve and a screw or of a plastic washer with an integrated sleeve and a metal shank. 3.2 fastening system assembly of components intended to secure a waterproofing system to the structural deck by means of point fasteners or linear fasteners NOTE Whilst primarily intended to secure the covering against wind uplift forces, the system may contribute to securing intermediate layers such as thermal insulation, vapour control layers, etc. 3.3 jointing technique sealing of at least two layers of flexible sheets for roof waterproofing
mm b maximum spacing between individual fasteners in a row mm Ca geometric correction factor - Cd statistical correction factor - g number of gusts, specified for each "proportional" peak load in a cycle - i proportional part of P100%;n % l length of the test area inside the pressure chamber mm m width of the test area inside the pressure chamber mm nf number of cycles before failure - Pa app
...