EN 50583-1:2016
(Main)Photovoltaics in buildings - Part 1: BIPV modules
Photovoltaics in buildings - Part 1: BIPV modules
This document applies to photovoltaic modules used as construction products. It focuses on the properties of these photovoltaic modules relevant to essential building requirements as specified in the European Construction Product Regulation CPR 305/2011, and the applicable electro-technical requirements as stated in the Low Voltage Directive 2006/95/EC / or CENELEC standards. This document references international standards, technical reports and guidelines. For some applications in addition national standards (or regulations) for building products may apply in individual countries, which are not explicitly referenced here and for which harmonized European Standards are not yet available. The document is addressed to manufacturers, planners, system designers, installers, testing institutes and building authorities. This document does not apply to concentrating or building-attached photovoltaic modules. This document addresses requirements on the PV modules in the specific ways they are intended to be mounted but not the mounting structure itself, which is within the scope of FprEN 50583- 2.
Photovoltaik im Bauwesen - Teil 1: BIPV-Module
Eléments photovoltaïques dans la construction - Partie 1: Modules photovoltaïques incorporés au bâtiment
Le présent document s'applique aux modules photovoltaïques utilisés comme produits de construction. Il cible les propriétés des modules photovoltaïques se rapportant aux exigences de construction essentielles spécifiées dans le Règlement européen sur les produits de construction (CPR 305/2011), et les exigences électrotechniques applicables indiquées dans la Directive Basse tension 2006/95/CE / ou les normes CENELEC. Le présent document référence des normes internationales, des rapports techniques et des directives. Pour certaines applications, d'autres normes (ou règlementations) nationales pour les produits de construction peuvent s'appliquer dans certains pays, qui ne sont pas référencées de manière explicite dans la présente norme et pour lesquelles il n'existe pas encore de normes européennes harmonisées. Le document est destiné aux fabricants, planificateurs, concepteurs de systèmes, installateurs, laboratoires d'essai et autorités compétentes dans le domaine de la construction. Le présent document ne s'applique pas aux modules photovoltaïques à concentration ou attenant à un bâtiment 1). Le présent document traite des exigences concernant les modules photovoltaïques (PV) qui portent sur les méthodes spécifiques selon lesquelles ces modules sont destinés à être montés, mais ne traite pas de la structure de montage elle-même, qui relève du domaine d'application du prEN 50583-2.
Fotonapetostni elementi v stavbah - 1. del: Moduli, vgrajeni v konstrukcijo (BIPV)
Ta dokument velja za fotovoltaične module, ki se uporabljajo kot gradbeni proizvodi. Osredotoča se na tiste lastnosti takšnih fotovoltaičnih modulov, ki zadevajo bistvene gradbene zahteve, kot so določene v Uredbi (EU) št. 305/2011 (Uredba o gradbenih proizvodih), ter veljavne elektro-tehnične zahteve, kot so določene v nizkonapetostni Direktivi 2006/95/ES ali standardih CENELEC. Ta dokument se sklicuje na mednarodne standarde, tehnična poročila in smernice. Za nekatere uporabe gradbenih proizvodov lahko v posameznih državah dodatno veljajo državni standardi (ali predpisi), ki v tem dokumentu niso izrecno navedeni in za katere še niso na voljo usklajeni evropski standardi. Dokument je namenjen proizvajalcem, načrtovalcem, oblikovalcem sistemov, montažerjem, inštitutom za preskušanje in pristojnim organom na področju gradbeništva.
Ta dokument ne velja za koncentrirane fotovoltaične module ali fotovoltaične module, pritrjene na stavbe. 1 Ta dokument obravnava zahteve za fotovoltaične module glede na načine, na katere se pritrjujejo, vendar ne glede na dejansko strukturo za njihovo pritrditev, ki spada v obseg standarda EN 50583-2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
Fotonapetostni elementi v stavbah - 1. del: Moduli, vgrajeni v konstrukcijo (BIPV)
Photovoltaics in buildings - Part 1: BIPV modules
Photovoltaik im Bauwesen - Teil 1: BIPV-Module
Eléments photovoltaïques dans la construction - Partie 1: Modules photovoltaïques
incorporés au bâti
Ta slovenski standard je istoveten z: EN 50583-1:2016
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50583-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2016
ICS 27.160
English Version
Photovoltaics in buildings - Part 1: BIPV modules
léments photovoltaïques dans la construction - Partie 1: Photovoltaik im Bauwesen - Teil 1: BIPV-Module
Modules photovoltaïques incorporés au bâti
This European Standard was approved by CENELEC on 2015-10-05. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50583-1:2016 E
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 6
4 Requirements . 7
4.1 General . 7
4.2 Electrical requirements . 8
4.3 Building-related requirements . 8
4.3.1 General . 8
4.3.2 BIPV Modules containing glass panes . 8
4.3.3 BIPV Modules not containing glass panes . 16
5 Labelling . 18
6 Documentation and declaration of performance . 18
6.1 Data sheet. 18
6.2 Declaration of conformity . 19
6.3 Further documentation . 19
Annex A (normative) Further requirements on PV modules that contain glass . 20
A.1 General . 20
A.2 Mechanical requirements . 20
A.3 Energy economy requirements . 20
Bibliography . 22
European foreword
This document (EN 50583-1:2016) has been prepared by CLC/TC 82 "Solar photovoltaic energy systems".
The following dates are fixed:
(dop) 2016-10-05
• latest date by which this document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-10-05
standards conflicting with this
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
1 Scope
This document applies to photovoltaic modules used as construction products. It focuses on the properties of
these photovoltaic modules relevant to essential building requirements as specified in the European
Construction Product Regulation CPR 305/2011, and the applicable electro-technical requirements as stated
in the Low Voltage Directive 2006/95/EC / or CENELEC standards. This document references international
standards, technical reports and guidelines. For some applications in addition national standards (or
regulations) for building products may apply in individual countries, which are not explicitly referenced here
and for which harmonized European Standards are not yet available.
The document is addressed to manufacturers, planners, system designers, installers, testing institutes and
building authorities.
This document does not apply to concentrating or building-attached photovoltaic modules.
This document addresses requirements on the PV modules in the specific ways they are intended to be
mounted but not the mounting structure itself, which is within the scope of EN 50583-2.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 410, Glass in building — Determination of luminous and solar characteristics of glazing
EN 673, Glass in building — Determination of thermal transmittance (U value) — Calculation method
EN 674, Glass in building — Determination of thermal transmittance (U value) — Guarded hot plate method
EN 675, Glass in building — Determination of thermal transmittance (U value) — Heat flow meter method
prEN 1279-5, Glass in building — Insulating glass units — Part 5: Evaluation of conformity
EN 1990, Eurocode: Basis of structural design
EN 1991 (all parts), Eurocode 1: Actions on structures
EN 1993 (all parts), Eurocode 3: Design of steel structures
EN 1999 (all parts), Eurocode 9: Design of aluminium structures
EN 12179, Curtain walling — Resistance to wind load — Test method
prEN 12488, Glass in buildings — Glazing recommendations — Assembly principles for vertical and sloping
glazing
EN 12519, Windows and pedestrian doors — Terminology
EN 12600, Glass in building — Pendulum test — Impact test method and classification for flat glass
EN 12758, Glass in building — Glazing and airborne sound insulation — Product descriptions and
determination of properties
For the definition of building-attached photovoltaic modules refer to 3.2
EN 13022 (all parts), Glass in building — Structural sealant glazing
EN 13116, Curtain walling — Resistance to wind load — Performance requirements
EN 13119, Curtain walling — Terminology
EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using
data from reaction to fire tests
EN 13501-2, Fire classification of construction products and building elements — Part 2: Classification using
data from fire resistance tests, excluding ventilation services
EN 13501-5, Fire classification of construction products and building elements — Part 5: Classification using
data from external fire exposure to roofs tests
EN 13830, Curtain walling — Product standard
EN 13956, Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing —
Definitions and characteristics
EN 14351-1, Windows and doors — Product standard, performance characteristics — Part 1: Windows and
external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
EN 14449, Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/
Product standard
EN 14500, Blinds and shutters — Thermal and visual comfort — Test and calculation methods
EN 14782, Self-supporting metal sheet for roofing, external cladding and internal lining — Product
specification and requirements
EN 14783, Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product
specification and requirements
EN 15804, Sustainability of construction works — Environmental product declarations — Core rules for the
product category of construction products
CEN/TR 15941, Sustainability of construction works — Environmental product declarations — Methodology
for selection and use of generic data
EN 15942, Sustainability of construction works — Environmental product declarations — Communication
format business-to-business
EN 15978, Sustainability of construction works — Assessment of environmental performance of buildings —
Calculation method
EN 16002, Flexible sheets for waterproofing — Determination of the resistance to wind load of mechanically
fastened flexible sheets for roof waterproofing
EN 50380, Datasheet and nameplate information for photovoltaic modules
EN 61082-1, Preparation of documents used in electrotechnology — Part 1: Rules (IEC 61082-1)
EN 61215, Crystalline silicon terrestrial photovoltaic (PV) modules — Design qualification and type approval
(IEC 61215)
EN 61646, Thin-film terrestrial photovoltaic (PV) modules — Design qualification and type approval
(IEC 61646)
EN 61730-1, Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction
(IEC 61730-1)
EN 61730-2, Photovoltaic (PV) module safety qualification — Part 2: Requirements for testing (IEC 61730-2)
CLC/TS 61836, Solar photovoltaic energy systems — Terms, definitions, symbols (IEC/TS 61836)
EN 62446, Grid connected photovoltaic systems — Minimum requirements for system documentation,
commissioning tests and inspection (IEC 62446)
EN 82079-1, Preparation of instructions for use — Structuring, content and presentation — Part 1: General
principles and detailed requirements (IEC 82079-1)
EN ISO 12543-1, Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and
description of component parts (ISO 12543-1)
EN ISO 12543-2, Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated
safety glass (ISO 12543-2)
EN ISO 12543-3, Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated
glass (ISO 12543-3)
EN ISO 12543-4, Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods
for durability (ISO 12543-4)
EN ISO 12543-5, Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and
edge finishing (ISO 12543-5)
EN ISO 12543-6, Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
(ISO 12543-6)
EN ISO 12631, Thermal performance of curtain walling — Calculation of thermal transmittance (ISO 12631)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1990, EN ISO 12543 (Parts 1 to 6),
EN 12519, EN 13119, EN 13956, EN 14782, EN 14783, CLC/TS 61836, EN 13022, EN 16002 and the
following apply.
Annex-specific definitions are included in the annexes themselves.
NOTE Additional information are provided in the Low Voltage Directive 2006/95/EC, the Construction Product
Regulation 305/2011 and the Electromagnetic Compatibility Directive ECD 2004/108/EC.
3.1
Building-Integrated Photovoltaic modules
BIPV modules
photovoltaic modules are considered to be building-integrated, if the PV modules form a construction product
providing a function as defined in the European Construction Product Regulation CPR 305/2011. Thus the
BIPV module is a prerequisite for the integrity of the building’s functionality. If the integrated PV module is
dismounted (in the case of structurally bonded modules, dismounting includes the adjacent construction
product), the PV module would have to be replaced by an appropriate construction product.
The building’s fun
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.