EN 12767:2019
(Main)Passive safety of support structures for road equipment - Requirements and test methods
Passive safety of support structures for road equipment - Requirements and test methods
This document specifies performance test procedures to determine the passive safety properties of support structures such as lighting columns, sign posts, signal supports, structural elements, foundations, detachable products and any other components used to support a particular item of equipment on the roadside.
This document provides a common basis for the vehicle impact testing of items of road equipment support structures.
This document does not apply to road restraint systems.
Passive Sicherheit von Tragkonstruktionen für die Straßenausstattung - Anforderungen und Prüfverfahren
Dieses Dokument legt Leistungsprüfverfahren für die Bestimmung passiver Sicherheitseigenschaften von Tragkonstruktionen, wie z. B. Lichtmaste, Wegweiser, Lichtsignalanlagen, Konstruktionselemente, Fundamente, abnehmbare Produkte und alle anderen Komponenten, die zum Tragen eines bestimmten Ausstattungsgegenstandes am Straßenrand verwendet werden, fest.
Dieses Dokument stellt eine gemeinsame Grundlage für die Fahrzeuganprallprüfungen von Tragkonstruktionen für die Straßenausstattung bereit.
Dieses Dokument gilt nicht für Rückhaltesysteme an Straßen.
Sécurité passive des structures supports d’équipements de la route - Prescriptions et méthodes d’essai
Le présent document spécifie les procédures d’essai de performance servant à déterminer les caractéristiques de sécurité passive des structures supports, telles que les candélabres d’éclairage public, les panneaux de signalisation, les supports de feux de signalisation, les éléments structurels, les fondations, les produits détachables et tout autre composant servant à supporter un équipement particulier installé sur le bord de la route.
Le présent document fournit une base commune pour les essais de choc de véhicules avec des structures supports d’équipements de la route.
Le présent document ne s’applique pas aux dispositifs de retenue routiers.
Pasivna varnost nosilnih konstrukcij za opremo cest - Zahteve in preskusne metode
Ta dokument določa postopke preskušanja zmogljivosti za določanje lastnosti pasivne varnosti nosilnih konstrukcij, kot so drogovi za razsvetljavo, znaki, konstrukcijski elementi, temelji, odstranljivi produkti in vse druge komponente, ki se uporabljajo kot nosilna konstrukcija za določen del opreme ob cesti.
Ta dokument zagotavlja skupno podlago za preskušanje elementov nosilne konstrukcije cestne opreme ob naletu vozil.
Ta dokument se ne uporablja za varovalne ograje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12767:2019
01-oktober-2019
Nadomešča:
SIST EN 12767:2008
Pasivna varnost nosilnih konstrukcij za opremo cest - Zahteve in preskusne
metode
Passive safety of support structures for road equipment - Requirements and test
methods
Passive Sicherheit von Tragkonstruktionen für die Straßenausstattung - Anforderungen
und Prüfverfahren
Sécurité passive des structures supports d’équipements de la route - Prescriptions et
méthodes d’essai
Ta slovenski standard je istoveten z: EN 12767:2019
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 12767:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12767:2019
---------------------- Page: 2 ----------------------
SIST EN 12767:2019
EN 12767
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 93.080.30 Supersedes EN 12767:2007
English Version
Passive safety of support structures for road equipment -
Requirements and test methods
Sécurité passive des structures supports Passive Sicherheit von Tragkonstruktionen für die
d'équipements de la route - Prescriptions et méthodes Straßenausstattung - Anforderungen und
d'essai Prüfverfahren
This European Standard was approved by CEN on 24 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12767:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12767:2019
EN 12767:2019 (E)
Contents
European foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 10
5 General test parameters . 11
5.1 Test site . 11
5.2 Backfill . 11
5.3 Test vehicle . 12
6 General test item parameters . 13
6.1 General test item documentation . 13
6.2 Test item selection .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.