iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12095:1997

(Main)

Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength

Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength

This standard specifies a method for testing the strength of fixing brackets intended to support plastics rainwater downpipe systems used externally on buildings. It is applicable to both metal and plastics brackets, and determines the amount of residual deformation after removal of a specified test load.

Kunststoff-Rohrleitungssysteme - Schellen für Regenwasser-Rohrleitungssysteme - Prüfverfahren der SchellenFestigkeit

Diese Norm legt ein Prüfverfahren für die Festigkeit von Befestigungsschellen als Halterung von Kunststoff-Regenwasser-Fallrohrsystemen außen an Gebäuden fest. Sie ist anwendbar sowohl für Metall- als auch für Kunststoff-Schellen und bestimmt den Betrag bleibender Verformung nach Wegnahme einer festgelegten Prüfbelastung.

Systèmes de canalisation en plastique - Colliers pour systèmes de descente pluviale - Méthode d'essai pour la résistance du collier

La présente norme spécifie une méthode d'essai de résistance des colliers de fixation destinés à supporter des systèmes de descente pluviale en plastique, à l'extérieur des bâtiments. Elle s'applique à la fois aux colliers métalliques et en plastique et détermine l'ampleur de la déformation résiduelle suite au retrait d'une charge d'essai spécifiée.

Cevni sistemi iz polimernih materialov - Nosilci za cevne sisteme za deževnico - Metoda za preskus trdnosti nosilcev

General Information

Status
Published
Publication Date
18-Feb-1997
Withdrawal Date
30-Aug-1997
ICS
21.060.70 - Clamps and staples
23.040.01 - Pipeline components and pipelines in general
91.140.80 - Drainage systems
Technical Committee
CEN/TC 155 - Plastics piping systems and ducting systems
Drafting Committee
CEN/TC 155 - Plastics piping systems and ducting systems
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2024
Completion Date
02-Dec-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 12095:1999 - Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength

Buy Standard

EN 12095:1999EN 12095:1999
PreviousNext
Standard
EN 12095:1999
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni sistemi iz polimernih materialov - Nosilci za cevne sisteme za deževnico - Metoda za preskus trdnosti nosilcevKunststoff-Rohrleitungssysteme - Schellen für Regenwasser-Rohrleitungssysteme - Prüfverfahren der SchellenFestigkeitSystemes de canalisation en plastique - Colliers pour systemes de descente pluviale - Méthode d'essai pour la résistance du collierPlasti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 13947:2024(Main)
Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2024)
kSIST FprEN ISO 13947:2024

This document specifies a metallographic test method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. This test method is applicable to repress powder-forged test specimens in which there has been minimal lateral flow (<1 %). The core region of the powder-forged test specimen must not contain porosity detectable at 100x magnification.
This test method can also be applied to determine the non-metallic inclusion content of powder-forged steel parts. However, in parts where there has been a significant amount of material flow, the near-neighbour separation distance needs to be changed, or the inclusion sizes agreed between the parties need to be adjusted.
This test method is not applicable for determining the non-metallic inclusion level of parts that have been forged such that the core region contains porosity. At the magnification used for this test method, residual porosity is hard to distinguish from inclusions. Too much residual porosity makes a meaningful assessment of the inclusion population impossible.
This test method can also be applied to materials that contain manganese sulphide (admixed or prealloyed), provided the near-neighbour separation distance is changed from 30 µm to 15 µm.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18034:2024(Main)
Algae and algae products - Methods of sampling and analysis - Determination of chlorophyll a content
kSIST FprEN 18034:2024

This document specifies a laboratory method for the determination of chlorophyll a content in algae. The method was initially tested and evaluated on the microalgae species Nannochloropsis sp. and a heat treated algal product tomato soup with Nannochloropsis sp. supplement, and the macro algae species Ulva sp., Furcellaria lumbricalis, and Saccharina latissima. During an Interlaboratory Trial the method was tested on the microalgae species Nannochloropsis sp. and the macro algae species Saccharina latissima. The microalgae species Nannochloropsis sp. and Phaodactlylum sp. and the macro algae species Ulva sp. and Saccharina latissima were tested in a Round Robin test. This document is only validated for chlorophyll a, but it can be used for other chlorophylls as well.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16605:2024(Main)
Space - Galileo Timing Receiver - Functional and Performance Requirements and associated Tests
oSIST prEN 16605:2024

This document is intended to stablish and define functional and performance requirements and associated tests for Galileo Timing Receivers. This document covers the following topics related to Galileo Timing Receivers:
- GNSS constellations and frequencies processed: Galileo plus additionally GPS, with nominal mode being dual-frequency processing,
- Time scales processed, including at least Galileo System Time and Universal Time Coordinate,
- User dynamics, with two operation modes: static users with well-known and static antenna position and dynamics users with moving antenna,
- Holdover devices,
- Nominal and back-up modes, including single-frequency modes, single-constellation modes and holdover mode.
- Processing of timing integrity information disseminated by the Galileo System,
- Time Receiver Autonomous Integrity Monitoring processing,
- Anti-jamming and anti-spoofing capabilities, including Automatic Gain Control monitoring and Galileo Open Service Navigation Message Authentication processing,
- Robustness to multipath.
In addition, this document gives guidelines for the installation and maintenance of the receiver, including antenna, cabling and receiver installation, initial and periodic receiver calibration, and periodic maintenance.
On top of the functional requirements, performance requirements this document defines in terms of different key performance indicators such as:
- Accuracy, availability, continuity and integrity requirements,
- T-RAIM performances, including time to alert,
- Holdover performances including maximum degradation of the timing solution with time and maximum holdover time,
This document also gives a simple test suite to verify the most fundamental requirements of the Galileo Timing Receivers.

  • Draft
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18001:2024(Main)
Curtain walling - Environmental product declarations - Product category rules for curtain walling
kSIST FprEN 18001:2024

This document provides product category rules (PCR) for Type III environmental declarations for curtain walling as defined in EN 13830:2015+A1:2020, excluding openable infills. Openable infills are addressed in EN 17213:2020.
This document complements the core rules for the product category of construction products as defined in EN 15804:2012+A2:2019. This document complements EN 15804:2012+A2:2019 and does not replace it.
NOTE   The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
-   defines the parameters to be declared and the way in which they are collated and reported;
-   describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   defines rules for the development of scenarios;
-   includes the rules for calculating the life cycle inventory and the life cycle impact assessment underlying the EPD, including the specification of the data quality to be applied;
-   includes the rules for reporting the predetermined, environmental and health information that is not covered by life cycle assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
-   defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-12:2024(Main)
Methods of testing cement - Part 12: Reactivity of cement constituents - Heat of hydration and bound water content methods
SIST EN 196-12:2025

This document specifies two equivalent test methods to assess the chemical reactivity of a pozzolanic or latent hydraulic cement constituent or concrete addition by measurements of heat of hydration (see Clause 5 and 8.3 Method A, Heat of Hydration) or bound water content (see Clause 5 and 8.4 Method B, Bound Water Content) of hydrated pastes composed of the cement constituent or concrete addition, calcium hydroxide, calcium carbonate, potassium sulfate, and potassium hydroxide cured at 40 °C for 72 h and 168 h (3 days and 7 days).
These two test methods measure chemical reactivity of test specimens intended for use as cementitious materials, such as cement constituents and concrete additions. The test methods do not distinguish between latent hydraulic and pozzolanic reactivity.
The test methods are used for qualification purposes if the cement constituents or concrete additions are tested at the fineness as specified by the respective product standards. In the absence of a product standard or a specification in the product standard, the constituents are tested at the fineness of the intended use.
NOTE   In case the test methods are used for purposes of comparison of intrinsic reactivity, cement constituents are tested at similar fineness, where possible.
The test methods are also used for testing other new constituents that are latent hydraulic or pozzolanic and that are not covered by EN 197 series product standards. However, for such new constituents the validity of the underlying correlations with strength development have not been verified; in consequence the test results can only be used for informative and indicative purposes.
Furthermore, these test methods are used in manufacturing control of cement constituents for assessing their latent hydraulic or pozzolanic reactivity.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4869-104:2024(Main)
Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 104: Multimode female termini size 12 - Technical specification
kSIST FprEN 4869-104:2024

This document details the dimensions and performance requirements of a multimode female size 12, non-physical contact expanded beam terminus. This terminus is suitable for use with connectors which have standard size 12 socket crimp contact cavities (series I and III): connectors with cavities for contact of type EN 3155-009F12.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 6059-203:2024(Main)
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 203: Coverage
kSIST FprEN 6059-203:2024

This document specifies methods for measuring and calculating the coverage of protection sleeves for electrical cables and cable bundles. It is presupposed to be used together with EN 6059 100.

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12122:2024(Main)
Chemicals used for treatment of water intended for human consumption - Ammonia solution
kSIST FprEN 12122:2024

This document is applicable to ammonia solution used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonia solution and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also provides basic information relating to safe handling and use of ammonia solution (see Annex B).

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12522:2024(Main)
Furniture removal activities - Furniture removal for private individuals - Service specification
kSIST FprEN 12522:2024

This document specifies the requirements for a furniture removal service and its provision and the general terms and conditions of contract subject always to any applicable national legislation, licensing or contractual constraints.
This document applies only to furniture removal services for private individuals where the contract is entered into by an individual or by an employer or relocation agent when the latter requires the moving of personal property, generally consisting of non-commercial property and/or property which is in current use.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1302:2024(Main)
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods
kSIST FprEN 1302:2024

This document is applicable to aluminium-based coagulants used for treatment of water intended for human consumption. It specifies analytical methods to be used for products described in EN 878, EN 882, EN 885, EN 886, EN 887, EN 935 and EN 17034.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day