iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 9121:2009

(Main)

Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)

Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)

The scope of this document is to define the content and the presentation of the Assessment Report of the section 1 of EN 9100 standard (based on ISO 9001:2000).

Luft- und Raumfahrt - Qualitätsmanagementsysteme - Audit für Händler und Lagerhalter (basiert auf ISO 9001:2000)

Série aérospatiale - Systèmes de management de la qualité - Évaluation applicable aux distributeurs stockistes (basé sur ISO 9001:2000)

Aeronavtika - Sistemi vodenja kakovosti - Ocenjevanje, ki se uporablja za distributerje skladiščnike (na podlagi ISO 9001:2000)

General Information

Status
Withdrawn
Publication Date
24-Mar-2009
Withdrawal Date
19-Jul-2011
ICS
03.100.70 - Management systems
03.120.10 - Quality management and quality assurance
03.120.20 - Product and company certification. Conformity assessment
49.020 - Aircraft and space vehicles in general
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 6 - Quality
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Jul-2011
Ref Project
SIST EN 9121:2009 - Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)

Relations

Replaces
EN 9121:2005 - Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)
Effective Date
08-Jun-2022
Replaced By
EN 9101:2011 - Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations
Effective Date
11-Feb-2015

Buy Standard

EN 9121:2009EN 9121:2009
PreviousNext
Standard
EN 9121:2009
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 9121:2009
01-maj-2009
1DGRPHãþD
SIST EN 9121:2008
$HURQDYWLND6LVWHPLYRGHQMDNDNRYRVWL2FHQMHYDQMHNLVHXSRUDEOMD]D
GLVWULEXWHUMHVNODGLãþQLNH QDSRGODJL,62
Aerospace series - Quality management systems - Assessment applicable to stockist
distributors (based on ISO 9001:2000)
Luft- und Raumfahrt - Qualitätsmanagementsysteme - Audit für Händler und Lagerhalter
(basiert auf ISO 9001:2000)
Série aérospatiale - Systèmes de management de la qualité - Évaluation applicable aux
distributeurs stockistes (basé sur ISO 9001:2000)
Ta slovenski standard je istoveten z: EN 9121:2009
ICS:
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9121:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 9121:2009

---------------------- Page: 2 ----------------------

SIST EN 9121:2009
EUROPEAN STANDARD
EN 9121
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2009
ICS 03.120.10; 49.020 Supersedes EN 9121:2005
English Version
Aerospace series - Quality management systems - Assessment
applicable to stockist distributors (based on ISO 9001:2000)
Série aérospatiale - Systèmes de management de la Luft- und Raumfahrt - Qualitätsmanagementsysteme -
qualité - Évaluation applicable aux distributeurs stockistes Audit für Händler und Lagerhalter (basiert auf ISO
(basé sur ISO 9001:2000) 9001:2000)
This European Standard was approved by CEN on 11 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9121:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 9121:2009
EN 9121:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 QUALITY SYSTEM ASSESSMENT REPORT CONTENT .4
Annex A (normative) QUALITY MANAGEMENT SYSTEM QUESTIONNAIRE . 12
1 PURPOSE . 12
2 USE OF THE QUESTIONNAIRE . 12
3 USE OF THE ASESSMENT SCORING CHART . 13
Annex B (normative) QUALITY MANAGEMENT SYSTEM AUDIT SCORING . 36

2

---------------------- Page: 4 ----------------------

SIST EN 9121:2009
EN 9121:2009 (E)
Foreword
This document (EN 9121:2009) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2009, and conflicting national standards shall be
withdrawn at the latest by September 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 9104-1:2023(Main)
Aerospace series - Quality management systems - Part 1: Requirements for Certification of aviation, space, and defense
SIST EN 9104-1:2024

This document defines the industry-accepted requirements for the ICOP scheme, which provides confidence to ASD customers, that organizations with certification of their QMS, issued by accredited CBs, meet applicable AQMS standard requirements. The requirements in this document are applicable to all participants in the ICOP scheme. If there is a conflict between the requirements of this document, and customer or applicable statutory/regulatory requirements, the latter takes precedence.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9101:2023(Main)
Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management Systems
SIST EN 9101:2024

1.1   General
This document defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the EN 9100-series standards, the organization’s QMS documentation, and customer and statutory/regulatory requirements.
The requirements in this document are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e. ISO/IEC 17000:2020, ISO/IEC 17021 1). When there is conflict with these standards, the requirements of this document take precedence.
NOTE 1   In this document, the term “EN 9100-series standards” comprises the EN 9100, EN 9110, and EN 9120 standards; developed by the IAQG and published by various national standards bodies.
NOTE 2   In addition to this document, the IAQG publishes deployment support material on the IAQG website (see http://www.iaqg.org) that can be used by audit teams, when executing the audit process.
1.2   Application
This document is intended to be used for audits of EN 9100-series standards by Certification Bodies (CBs) for certification of organizations, under the auspices of the ASD industry certification scheme [also known as the Industry Controlled Other Party (ICOP) scheme]. The ICOP scheme requirements are defined in the EN 9104-series standards (i.e. FprEN 9104-1, prEN 9104-2, EN 9104 3).
NOTE   Relevant parts of this document can also be used by an organization in support of internal audits (1st party) and external audits at suppliers (2nd party).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9104-002:2016(Main)
Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
SIST EN 9104-002:2016

Die in diesem Dokument festgelegten Anforderungen gelten für die IAQG und zugehörige Sektoren, die die Überwachung festgelegter Anforderungen nach der Normenreihe EN 9104 (d. h. EN 9104 001, EN 9104 002, EN 9104 003) steuern. Die Anforderungen gelten für IAQG-Arbeitsgruppen für die Überwachung/Kontrolle.
ANMERKUNG   Alle erforderlichen Formulare sind in Anhang A abgebildet. Diese Beispiel-Formulare werden zu Referenzzwecken dargestellt; die aktuellen Versionen dieser Formulare stehen auf der IAQG-Webseite zur Verfügung.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9104-1:2023(Main)
Aerospace series - Quality management systems - Part 1: Requirements for Certification of aviation, space, and defense
SIST EN 9104-1:2024

This document defines the industry-accepted requirements for the ICOP scheme, which provides confidence to ASD customers, that organizations with certification of their QMS, issued by accredited CBs, meet applicable AQMS standard requirements. The requirements in this document are applicable to all participants in the ICOP scheme. If there is a conflict between the requirements of this document, and customer or applicable statutory/regulatory requirements, the latter takes precedence.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9101:2023(Main)
Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management Systems
SIST EN 9101:2024

1.1   General
This document defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the EN 9100-series standards, the organization’s QMS documentation, and customer and statutory/regulatory requirements.
The requirements in this document are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e. ISO/IEC 17000:2020, ISO/IEC 17021 1). When there is conflict with these standards, the requirements of this document take precedence.
NOTE 1   In this document, the term “EN 9100-series standards” comprises the EN 9100, EN 9110, and EN 9120 standards; developed by the IAQG and published by various national standards bodies.
NOTE 2   In addition to this document, the IAQG publishes deployment support material on the IAQG website (see http://www.iaqg.org) that can be used by audit teams, when executing the audit process.
1.2   Application
This document is intended to be used for audits of EN 9100-series standards by Certification Bodies (CBs) for certification of organizations, under the auspices of the ASD industry certification scheme [also known as the Industry Controlled Other Party (ICOP) scheme]. The ICOP scheme requirements are defined in the EN 9104-series standards (i.e. FprEN 9104-1, prEN 9104-2, EN 9104 3).
NOTE   Relevant parts of this document can also be used by an organization in support of internal audits (1st party) and external audits at suppliers (2nd party).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9104-002:2016(Main)
Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
SIST EN 9104-002:2016

Die in diesem Dokument festgelegten Anforderungen gelten für die IAQG und zugehörige Sektoren, die die Überwachung festgelegter Anforderungen nach der Normenreihe EN 9104 (d. h. EN 9104 001, EN 9104 002, EN 9104 003) steuern. Die Anforderungen gelten für IAQG-Arbeitsgruppen für die Überwachung/Kontrolle.
ANMERKUNG   Alle erforderlichen Formulare sind in Anhang A abgebildet. Diese Beispiel-Formulare werden zu Referenzzwecken dargestellt; die aktuellen Versionen dieser Formulare stehen auf der IAQG-Webseite zur Verfügung.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day