Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes (ISO/TR 27165:2012)

ISO/TR 27165:2012 provides definitions for wall constructions of thermoplastics pipes intended to be used in pressure and non-pressure pipe applications. It takes into account as far as possible already existing definitions in published product standards and gives guidance for a common text when drafting new deliverables or revising existing ones.

Rohrleitungssysteme aus thermoplastischen Kunststoffen - Anleitung für die Benennung der Wandkonstruktionen thermoplastischer Rohre (ISO/TR 27165:2012)

Systèmes de canalisations thermoplastiques - Lignes directrices pour les définitions relatives à la construction des parois de tubes (ISO/TR 27165:2012)

Cevni sistemi iz polimernih materialov - Navodilo za definicijo strukture sten za cevi (ISO/TR 27165:2012)

To tehnično poročilo zagotavlja definicijo strukture sten termoplastičnih cevi, ki je namenjena za uporabo pri tlačnih in breztlačnih ceveh. V čim večji meri upošteva že obstoječe definicije v objavljenih standardih za izdelke in daje navodila za običajno besedilo pri pripravi osnutka novih izsledkov ali spreminjanju obstoječih.

General Information

Status
Published
Publication Date
14-Oct-2012
Current Stage
6060 - Definitive text made available (DAV) - Publishing

Buy Standard

Technical report
-TP CEN ISO/TR 27165:2012
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 27165:2012
01-december-2012

Cevni sistemi iz polimernih materialov - Navodilo za definicijo strukture sten za

cevi (ISO/TR 27165:2012)

Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes

(ISO/TR 27165:2012)

Rohrleitungssysteme aus thermoplastischen Kunststoffen - Anleitung für die Benennung

der Wandkonstruktionen thermoplastischer Rohre (ISO/TR 27165:2012)

Systèmes de canalisations thermoplastiques - Lignes directrices pour les définitions

relatives à la construction des parois de tubes (ISO/TR 27165:2012)
Ta slovenski standard je istoveten z: CEN ISO/TR 27165:2012
ICS:
83.140.30 Cevi, fitingi in ventili iz Plastics pipes, fittings and
polimernih materialov valves
SIST-TP CEN ISO/TR 27165:2012 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN ISO/TR 27165:2012
---------------------- Page: 2 ----------------------
SIST-TP CEN ISO/TR 27165:2012
TECHNICAL REPORT
CEN ISO/TR 27165
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
October 2012
ICS 23.040.20; 91.140.60
English Version
Thermoplastics piping systems - Guidance for definitions of wall
constructions for pipes (ISO/TR 27165:2012)

Systèmes de canalisations thermoplastiques - Lignes Rohrleitungssysteme aus thermoplastischen Kunststoffen -

directrices pour les définitions relatives à la construction Anleitung für die Benennung der Wandkonstruktionen

des parois de tubes (ISO/TR 27165:2012) thermoplastischer Rohre (ISO/TR 27165:2012)

This Technical Report was approved by CEN on 8 October 2012. It has been drawn up by the Technical Committee CEN/TC 155.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 27165:2012: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN ISO/TR 27165:2012
CEN ISO/TR 27165:2012 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST-TP CEN ISO/TR 27165:2012
CEN ISO/TR 27165:2012 (E)
Foreword

This document (CEN ISO/TR 27165:2012) has been prepared by Technical Committee CEN/TC 155 “Plastics

piping systems and ducting systems", the secretariat of which is held by NEN, in collaboration with Technical

Committee ISO/TC 138 "Plastics pipes, fittings and valves for the transport of fluids".

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

---------------------- Page: 5 ----------------------
SIST-TP CEN ISO/TR 27165:2012
---------------------- Page: 6 ----------------------
SIST-TP CEN ISO/TR 27165:2012
TECHNICAL ISO/TR
REPORT 27165
First edition
2012-10-15
Thermoplastics piping systems —
Guidance for definitions of wall
constructions for pipes
Systèmes de canalisations thermoplastiques — Lignes directrices pour
les définitions relatives à la construction des parois de tubes
Reference number
ISO/TR 27165:2012(E)
ISO 2012
---------------------- Page: 7 ----------------------
SIST-TP CEN ISO/TR 27165:2012
ISO/TR 27165:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s

member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST-TP CEN ISO/TR 27165:2012
ISO/TR 27165:2012(E)
Contents Page

Foreword ............................................................................................................................................................................iv

Introduction ........................................................................................................................................................................ v

1 Scope ...................................................................................................................................................................... 1

2 Normative references ......................................................................................................................................... 1

3 Terms and definitions ......................................................................................................................................... 1

3.1 Materials ................................................................................................................................................................. 1

3.2 Coated pipes ......................................................................................................................................................... 1

3.3 Solid wall pipes .................................................................................................................................................... 2

3.4 Multilayer pipes .................................................................................................................................................... 2

3.5 Structured wall pipes ......................................................................................................................................... 3

3.6 Double wall piping system ................................................................................................................................ 3

© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST-TP CEN ISO/TR 27165:2012
ISO/TR 27165:2012(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International

Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

In exceptional circumstances, when a technical committee has collected data of a different kind from that

which is normally published as an International Standard (“state of the art”, for example), it may decide by a

simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely

informative in nature and does not have to be reviewed until the data it provides are considered to be no longer

vali
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.