iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 22359

(Main)

Security and resilience - Guidelines for hardened protective shelters (ISO 22359:2024)

Security and resilience - Guidelines for hardened protective shelters (ISO 22359:2024)

Identical scope from ISO 22359:2024

Sicherheit und Resilienz - Leitfaden für verstärkte Schutzräume (ISO 22359:2024)

Sécurité et résilience - Lignes directrices relatives aux abris durcis (ISO 22359:2024)

Varnost in vzdržljivost - Smernice za utrjena zaklonišča (ISO 22359:2024)

General Information

Status
Not Published
Publication Date
06-Jun-2027
ICS
03.100.01 - Company organization and management in general
91.040.99 - Other buildings
Technical Committee
CEN/TC 391 - Societal and Citizen Security
Drafting Committee
CEN/TC 391 - Societal and Citizen Security
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
03-Apr-2025
Due Date
09-Dec-2025
Completion Date
03-Apr-2025
Ref Project
oSIST prEN ISO 22359:2025 - Security and resilience - Guidelines for hardened protective shelters (ISO 22359:2024)

Buy Standard

prEN ISO 22359:2025prEN ISO 22359:2025
PreviousNext
Draft
prEN ISO 22359:2025
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2025
Varnost in vzdržljivost - Smernice za utrjena zaklonišča (ISO 22359:2024)
Security and resilience - Guidelines for hardened protective shelters (ISO 22359:2024)
Sicherheit und Resilienz - Leitfaden für verstärkte Schutzräume (ISO 22359:2024)
Sécurité et résilience - Lignes directrices relatives aux abris durcis (ISO 22359:2024)
Ta slovenski standard je istoveten z: prEN ISO 22359
ICS:
03.100.01 Organizacija in vodenje Company organization and
podjetja na splošno management in general
91.040.99 Druge stavbe Other buildings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

International
Standard
ISO 22359
First edition
Security and resilience —
2024-08
Guidelines for hardened protective
shelters
Sécurité et résilience — Lignes directrices relatives aux abris durcis
Reference number
ISO 22359:2024(en) © ISO 2024
ISO 22359:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 22359:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design of a shelter . 2
4.1 Design process .2
4.2 Design criteria .3
4.2.1 Hazards .3
4.2.2 General parameters .4
4.2.3 Type and purpose of a shelter .4
4.2.4 Location .5
4.3 Shelter sections and layout design .5
4.3.1 General .5
4.3.2 Entrance and exit passages .6
4.3.3 Living section .7
4.3.4 Service section .8
4.3.5 Technical section .9
4.4 Structural design .10
4.4.1 General .10
4.4.2 Calculation of the loads .11
4.4.3 Bedrock and concrete shelters .11
4.5 Heating, ventilation, air conditioning (HVAC) and other mechanical systems. 12
4.5.1 Ventilation and air conditioning . 12
4.5.2 Water supply and sewage . 13
4.6 Electrical and electronic systems . 13
4.6.1 Power generation . 13
4.6.2 External communication . 13
4.6.3 Internal communication . 13
4.6.4 Situational awareness. 13
4.6.5 Intentional electromagnetic interference IEMI (EMP and HPM) protection . 13
4.6.6 Monitoring and control . 13
4.7 Shelter protective equipment .14
4.7.1 General .14
4.7.2 Blast protection .14
4.7.3 Gas tightness .14
4.7.4 Tightness of penetrations . 15
4.7.5 Ground shock isolation . 15
4.7.6 CBRN protection . 15
4.7.7 Removal of carbon dioxide and addition of oxygen.16
4.8 Safety and security .16
4.8.1 Physical safety and security .16
4.8.2 Fire safety .16
5 Commissioning of a shelter . 17
6 Use and maintenance of a shelter . 17
6.1 Sheltering cycle .17
6.2 Normal time use .18
6.3 Activation period – preparing the shelter for crisis time use.18
6.4 Crisis time – use of the shelter in various sheltering modes .19
6.5 Deactivation period – preparing the shelter for normal time use .19
6.6 Modifications and alterations during the service life of a shelter .19
Annex A (informative) Sheltering modes .20

iii
ISO 22359:2024(en)
Annex B (informative) Examples of shelters.23
Bibliography .26

iv
ISO 22359:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was p
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 868-7:2025(Main)
Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
SIST EN 868-7:2025

This document specifies test methods and values for sealable adhesive coated paper manufactured from paper complying with EN 868-6, used as single-use sterile barrier systems and/or single-use packaging systems for terminally sterilized medical devices by the means of low temperature sterilization processes.
Other than the general requirements as specified in EN ISO 11607-1 and EN ISO 11607-2 [2], this part of EN 868 specifies materials, test methods and values that are specific to the products covered by this document.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 397:2025(Main)
Industrial protective helmets
kSIST FprEN 397:2025

This document specifies requirements for design, performance, test methods and markings for industrial protective helmets. The requirements apply to helmets for general use in industry.
Additional performance requirements for special applications are included to apply only when specifically claimed by the helmet manufacturer.
Industrial protective helmets are intended to reduce the risk of head injuries caused by impacts and therefore can reduce consequential effects.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16732:2025(Main)
Slide fasteners (zips) - Specification
SIST EN 16732:2025

This document specifies performance levels and test methods for the following characteristics of slide fasteners made from interlocking components mounted on tapes: strengths of puller attachment, closed-end slide fastener bottom stop, top stop, open-end slide fastener box, reciprocating mechanism, closed slide fastener when extended laterally, open-end attachment when extended laterally, slider locking device, and open-end slide fastener single stringer slider retention and slider resistance to torque.
NOTE   The tests specified in Annexes B to K have been specifically devised to permit their direct application to finished slide fasteners with a view to giving the user reasonable assurance that a slide fastener conforming to the requirements of this document can satisfactorily fulfil its intended purpose. Annex L gives information about sampling procedures for bulk quantities of slide fasteners.
In addition, performance levels are also specified for colour fastness to washing, dry cleaning and water, and for dimensional stability to washing and dry cleaning.
This document is applicable to all different types of slide fasteners for general use and is not applicable to slide fasteners for specialist purposes (for example: pressure sealed slide fasteners for diving suits).

  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16798-3:2025(Main)
Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
SIST EN 16798-3:2025

This document applies to the design, energy performance of buildings and implementation of ventilation, air conditioning and room conditioning systems for non-residential buildings subject to human occupancy, excluding applications like industrial processes. It focuses on the definitions of the various parameters that are relevant for such systems.
The guidance for design given in this document and accompanying CEN/TR 16798-4 are mainly applicable to mechanical supply and/or exhaust ventilation systems. Natural ventilation systems or natural parts of hybrid ventilation systems are not covered by this document.
Applications for residential ventilation are not covered in this document. Performance of ventilation systems in residential buildings is covered in EN 15665 and CEN/TR 14788.
The classification uses different categories. For some values, examples are given and, for requirements, typical ranges with default values are presented. The default values are given in Annex B and a template for national specification is given in Annex A. It is important that the classification is always appropriate to the type of building and its intended use, and that the basis of the classification is explained if the examples given in this document are not used.
NOTE 1   Different standards can express the categories for the same parameters in a different way, and also the category symbols can be different.
Table 1 shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE 2   In CEN ISO/TR 52000-2 the same Table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 3   The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Table A.1 and Table B.1.
Table 1 - Position of this standard (in case M5-1, M5-4), within the modular structure of the set of EPB standards

  • Draft
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 868-4:2025(Main)
Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods
SIST EN 868-4:2025

This document specifies test methods and values for single-use paper bags manufactured from paper specified in EN 868-3, used as sterile barrier systems and/or packaging systems for terminally sterilized medical devices.
Other than the general requirements as specified in EN ISO 11607-1 and EN ISO 11607-2, this part of EN 868 specifies materials, test methods and values that are specific to the products covered by this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 868-6:2025(Main)
Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
SIST EN 868-6:2025

This document specifies test methods and values for paper used in the manufacture of single-use preformed sterile barrier systems and/or packaging systems for terminally sterilized medical devices by means of low temperature sterilization processes.
Other than the general requirements as specified in EN ISO 11607-1 and EN ISO 11607-2 [2], this part of EN 868 specifies materials, test methods and values that are specific to the products covered by this document.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13852-1:2025(Main)
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
SIST EN 13852-1:2025

This document applies to general purpose offshore cranes including their supporting pedestals and structures.
This document is applicable to general purpose offshore cranes, whose structures are made of steel.
This document provides requirements for all significant hazards, hazardous situations and events relevant to general purpose offshore cranes, for lifting of goods and lifting of persons, when used as intended and under the conditions foreseen by the risk assessment (see Clause 4).
This document is applicable to general purpose offshore cranes, which are manufactured after the date of approval by CEN of this document.
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping, installation or erecting of the crane;
b)   any item attached to the hook, such as loads, non-fixed load lifting attachments, lifting accessories, baskets, carriers and containers;
c)   lifting operations in ambient temperatures below - 20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   accidental loads as result of collisions, earthquakes, explosions, etc., which are not covered by exceptional loads defined in Table B.7 ;
f)   floating cranes (covered by EN13852-2), light offshore cranes (covered by FprEN13852-3) and 2D/3D motion compensated cranes;
g)   subsea lifting operations;
h)   lifting operations involving more than one crane;
i)   emergency rescue operations (except training).

  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17681-1:2025(Main)
Textiles and textile products - Per- and polyfluoroalkyl substances (PFAS) - Part 1: Analysis of an alkaline extract using liquid chromatography and tandem mass spectrometry
SIST EN 17681-1:2025

This document specifies a test method, including the degradation of certain side-chain fluorinated polymers during the extraction with simultaneous alkaline hydrolysis, and using liquid chromatography (LC) and tandem mass spectrometry (MS/MS) for identification and quantification of certain per- and polyfluoroalkyl substances (PFAS). The document is applicable to all materials of textile products.
Table 2 indicates a list of target PFAS which can be analysed with this document. PFAS of Table 2 marked with the footnote e) and footnote f) undergo alkaline hydrolysis and only their per- or polyfluorinated degradation products such as PFOA or n:2 fluorotelomer alcohols (n:2 FTOHs, n = 4, 6, 8, 10) can be determined.
Through the methods outlined in the informative Annex E and Annex F, free n:2 FTOHs, PFOA and non-polymeric PFAS of Table 2 marked with the footnote e) and footnote f), that are not stable to alkaline hydrolysis, can be identified and quantified.
Certain side-chain fluorinated polymers release n:2 FTOHs (n = 4, 6, 8, 10) under the described extraction conditions. Since these side-chain fluorinated polymers can be PFOA or C9-C14 PFCA-related substances restricted by the EU-POPs [1] or EU-REACH [2] regulations, the amounts of released n:2 FTOHs can be used to indirectly assess whether the concentration of the aforementioned side-chain fluorinated polymers exceed limits for PFOA or C9-C14 PFCA-related substances.
This document is also applicable to the determination of further PFAS, provided that the method is validated with the additional substances and that these PFAS are stable to alkaline hydrolysis and dehydrofluorination.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9073-5:2025(Main)
Nonwovens - Test methods - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO 9073-5:2025)
SIST EN ISO 9073-5:2025

This document specifies a method for determining the resistance to mechanical penetration of nonwoven fabrics by a ball of a given diameter.
The method is primarily designed to be used on nonwovens with some degree of elasticity, for which a regular burst test does not apply.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18139:2025(Main)
Personal identification - European guide for biometric recognition applications based on ID documents (ERG)
kSIST-TS FprCEN/TS 18139:2025

This document defines requirements and provides guidance on:
•   capturing of facial images to be used for verification or identification purposes in applications based on reference images in identity or similar documents and traveller or visa databases;
•   capturing of fingerprint images to be used for verification or identification purposes in applications based on reference images in identity or similar documents and traveller or visa databases;
•   data quality maintenance for biometric data captured by/for verification or identification applications;
•   data authenticity maintenance for biometric data captured by/for verification or identification ap-plications.
This document addresses the following aspects which are specific for biometric data capturing:
•   biometric data quality and interoperability assurance;
•   data authenticity assurance;
•   morphing and other presentation attacks and biometric data injection attacks;
•   accessibility and usability;
•   recognition algorithms and their evaluation;
•   privacy and data protection;
•   optimal process design.
The following aspects are out of scope:
•   other aspects of IT security;
•   data capturing for ID document enrolment purposes, e.g. passport or ID card enrolment.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day