EN 450-1:2005+A1:2007

Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

This European Standard specifies requirements for the chemical and physical properties as well as quality control procedures for fly ash, as defined in clause 3.2, for use as a type II addition for preparation of concrete, mortar and grout, including in particular cast-in-situ or prefabricated structural concrete conforming to EN 206-1. )
It is, however, beyond the scope of this standard to specify provisions governing the practical application of fly ash in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing fly ash. As regards such provisions, reference should be made to other European or national standards for concrete, such as EN 206-1.
Fly ash for use in the manufacture of cements according to EN 197-1 is outside the scope of this standard.

Flugasche für Beton - Teil 1: Definition, Anforderungen und Konformitätskriterien

Dieses Dokument legt Anforderungen an die chemischen und physikalischen Eigenschaften sowie Verfahren für die Güteüberwachung von siliciumreicher Flugasche nach der Definition in 3.2 fest, die als Zusatzstoff Typ II für die Herstellung von Beton, einschließlich insbesondere auch von Ortbeton oder Betonfertigteilen für tragende Zwecke, nach EN 206 1 verwendet wird. Flugasche entsprechend dieser Norm kann auch in Mörteln und Einpressmörteln verwendet werden.
Flugasche, die mit anderen Typen oder höheren Prozentsätzen von Mitverbrennungsstoffen als in Abschnitt 4 vorgesehen hergestellt wird, ist nicht Gegenstand dieser Norm.
Festlegungen für die praktische Verwendung von Flugasche bei der Betonherstellung, d. h. Anforderungen an die Zusammensetzung, das Mischen, den Einbau, die Nachbehandlung usw. von Flugasche enthaltendem Beton, sind nicht Gegenstand dieser Norm. Für diesbezügliche Festlegungen wird auf andere Europäische oder Nationale Normen über Beton, wie z. B. EN 206 1, verwiesen.

Cendres volantes pour béton - Partie 1: Définition, spécifications et critères de conformité

La présente norme européenne définit les exigences relatives aux propriétés chimiques et physiques ainsi qu'aux procédures de maîtrise de la qualité pour les cendres volantes, telles que définies en 3.2, utilisées comme addition de Type II pour l'élaboration de béton, de mortier ou de coulis, et notamment, de béton de structure coulé en place ou préfabriqué, en accord avec l'EN 206-1 ).
Les règles concernant l'utilisation pratique des cendres volantes dans l'élaboration du béton, c'est-à-dire les dispositions concernant la composition, le malaxage, la mise en place, la cure etc. de bétons qui contiennent des cendres volantes, sortent toutefois du champ d'application de la présente norme. Pour ces règles, il convient de se référer à d'autres normes européennes ou nationales traitant du béton, comme l'EN 206-1 par exemple.
Les cendres volantes destinées à être utilisées pour la fabrication de ciments selon l'EN 197-1 ne sont pas couvertes par la présente norme.

Elektrofiltrski pepel - 1. del: Definicije, specifikacije in merila skladnosti

General Information

• Status: Withdrawn
• Publication Date: 16-Oct-2007
• Withdrawal Date: 07-Aug-2012
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/WG 4 - EN 450 fly ash for concrete
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Aug-2012
• Completion Date: 08-Aug-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 450-1:2005+A1:2008 - Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

Relations

• Merged From: EN 450-1:2005 - Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
• Effective Date: 22-Dec-2008
• Replaced By: EN 450-1:2012 - Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
• Effective Date: 15-Aug-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fly ash for concrete - Part 1: Definition, specifications and conformity criteriaElektrofiltrski pepel - 1. del: Definicije, specifikacije in merila skladnostiCendres volantes pour béton - Partie 1: Définition, spécifications et criteres de conformitéFlugasche für Beton - Teil 1: Definition, Anforderungen und KonformitätskriterienTa slovenski standard je istoveten z:EN 450-1:2005+A1:2007SIST EN 450-1:2005+A1:2008en,fr91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 450-1:2005+A1:200801-januar-2008

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 450-1:2005+A1
October 2007 ICS 91.100.30 Supersedes EN 450-1:2005 English Version
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
Cendres volantes pour béton - Partie 1: Définition, spécifications et critères de conformité
Flugasche für Beton - Teil 1: Definition, Anforderungen und Konformitätskriterien This European Standard was approved by CEN on 22nd December 2004 and includes Amendment 1 approved by CEN on 10 September 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 450-1:2005+A1:2007: E

Release of dangerous substances and emission of radioactivity.20 Annex B (normative)
Method of determining the water requirement for Category S fly ash.21 Annex C (normative)
Determination of the content of soluble phosphate (expressed as P2O5).23 C.1 Principle of the method.23 C.2 Sample for analysis.23 C.3 Reagents.23 C.4 Apparatus.23 C.4 Procedure.23 C.6 Calculation.24 C.7 Report.24 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.25 Bibliography.33
Figures Figure ZA.1 — Example CE marking information.31 Tables Table 1 — Types of co-combustion materials.9
...