Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification

This standard specifies the technical conditions for inspection and delivery, mechanical properties and tolerances on dimensions and form for aluminium and aluminium alloy extruded round, coiled tubes for general applications with outside or inside diameters in the range from 5 mm up to and including 30 mm.
Depending on the final application of the product, additional or stricter requirements can apply, after agreement between supplier and purchaser.
NOTE   Some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein is not be construed in any way as the granting of a licence under such patent right.
CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding standard.

Aluminium und Aluminiumlegierungen - Stranggepresste Rundrohre in Ringen für allgemeine Anwendungen - Spezifikation

Diese Europäische Norm legt die Technischen Lieferbedingungen, die mechanischen Eigenschaften und die Grenzabmaße und Formtoleranzen für stranggepresste Rundrohre aus Aluminium und Aluminiumlegierungen in Ringen für allgemeine Anwendungen fest. Sie gilt für Außen- oder Innendurchmesser von 5 mm bis 30 mm.
Abhängig von der Endanwendung des Erzeugnisses können zusätzliche oder engere Anforderungen nach Vereinbarung zwischen Lieferer und Kunden festgelegt werden.
ANMERKUNG   Einige in der vorliegenden Norm aufgeführte Produkte können Gegenstand von einem Patent oder Patent-anmeldungen sein. Ihre Auflistung in dieser Norm bedeutet aber keinesfalls, dass dadurch eine Lizenzübertragung unter diesem Patentrecht erfolgt.
CEN/TC 132 bekräftigt seine Vorgehensweise, dass in dem Fall, wenn ein Patentinhaber sich weigert, für genormte Produkte Lizenzen unter angemessenen und nicht diskriminierenden Bedingungen zu erteilen, dieses Produkt aus der entsprechenden Norm entfernt werden muss.

Aluminium et alliages d'aluminium - Tubes ronds filés, fournis en couronnes pour applications générales - Spécification

Cette Norme européenne spécifie les conditions techniques de contrôle et de livraison, les caractéristiques mécaniques et les tolérances sur dimensions et forme pour les produits filés ronds, les tubes enroulés pour applications générales avec un diamètre extérieur ou intérieur dans la plage de 5 mm jusqu'à et y compris 30 mm.
Après accord entre l'acheteur et le fournisseur des exigences additionnelles ou plus serrées peuvent être convenues, dépendant de l'application finale du produit.
NOTE   Des produits cités dans la présente norme peuvent faire l'objet de brevet ou de demandes de brevets, et leur inclusion dans la présente norme ne doit être en aucune façon considérée comme l'attribution d'une licence au regard des droits attachés à de tels brevets.
Le CEN/TC 132 confirme que dans le cas où le détenteur d'un brevet refuse de céder des licences sur les produits normalisés sous des conditions raisonnables et non discriminatoires, alors ce produit serait éliminé de la norme correspondante.

Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification

General Information

Status
Withdrawn
Publication Date
19-Aug-2003
Withdrawal Date
14-Oct-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Oct-2008
Completion Date
15-Oct-2008

Relations

Buy Standard

Standard
EN 13957:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - SpecificationAluminium und Aluminiumlegierungen - Stranggepresste Rundrohre in Ringen für allgemeine Anwendungen - SpezifikationAluminium et alliages d'aluminium - Tubes ronds filés, fournis en couronnes pour applications générales - SpécificationAluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 13957:2003SIST EN 13957:2004en01-junij-2004SIST EN 13957:2004SLOVENSKI
STANDARD



SIST EN 13957:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13957August 2003ICS 77.150.10English versionAluminium and aluminium alloys - Extruded round, coiled tubefor general applications - SpecificationAluminium et alliages d'aluminium - Tubes ronds filés,fournis en couronnes, pour applications générales -SpécificationsAluminium und Aluminiumlegierungen - StranggepressteRundrohre in Ringen für allgemeine Anwendungen -SpezifikationThis European Standard was approved by CEN on 2 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13957:2003 ESIST EN 13957:2004



EN 13957:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Technical conditions for inspection and delivery.43.1General.43.2Production and manufacturing process.43.3Coil size and weight.44Alloys and sizes.54.1Alloys.54.2Sizes.55Mechanical properties.56Tolerances on dimensions and form.56.1Diameter.56.2Wall thickness.6SIST EN 13957:2004



EN 13957:2003 (E)3ForewordThis document (EN 13957:2003) has been prepared by Technical Committee CEN /TC 132, "Aluminium andaluminium alloys", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.