iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12258-1:1998

(Main)

Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms

Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms

This European Standard defines general terms which are helpful for the communication within the aluminium industry and its customers relating to products of aluminium and aluminium alloys. Note: In some terms and definitions "metal" is used for aluminium and aluminium alloys". Definitions in other standards applying to a particular field of application can be more specific than the definitions of identical terms in this standard; these can be found in the relevant standards.

Aluminium et alliages d'aluminium - Termes et définitions - Partie 1: Termes généraux

La présente norme européenne définit les termes généraux concernant les produits en aluminium et alliages d'aluminium qui aident à la communication à l'intérieur de l'industrie de l'aluminium et ses clients. Note: Dans quelques termes et définitions, le mot "métal" est utilisé pour signifier "aluminium et alliages d'aluminium". Des définitions contenues dans d'autres normes qui s'appliquent à un domaine d'application particulier peuvent être plus spécifiques que les définitions des mêmes termes données dans la présente norme; elles peuvent être trouvées dans les normes correspondantes.

Aluminij in aluminijeve zlitine - Pojmi in definicije - 1. del: Splošni pojmi

General Information

Status
Withdrawn
Publication Date
16-Jun-1998
Withdrawal Date
12-Jun-2012
ICS
01.040.77 - Metallurgy (Vocabularies)
77.120.10 - Aluminium and aluminium alloys
Technical Committee
CEN/TC 132 - Aluminium and aluminium alloys
Drafting Committee
CEN/TC 132/WG 18 - Terminology
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Jun-2012
Completion Date
13-Jun-2012
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 12258-1:1999 - Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms

Relations

Replaces
EN 23134-3:1991 - Light metals and their alloys - Terms and definitions - Part 3: Wrought products (ISO 3134-3:1985)
Effective Date
22-Dec-2008
Replaces
EN 23134-4:1991 - Light metals and their alloys - Terms and definitions - Part 4: Castings (ISO 3134-4:1985)
Effective Date
22-Dec-2008
Replaces
EN 23134-1:1991 - Light metals and their alloys - Terms and definitions - Part 1: Materials (ISO 3134-1:1985)
Effective Date
22-Dec-2008
Replaces
EN 23134-2:1991 - Light metals and their alloys - Terms and definitions - Part 2: Unwrought products (ISO 3134-2:1985)
Effective Date
22-Dec-2008
Replaced By
EN 12258-1:2012 - Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
Effective Date
20-Jun-2012

Buy Standard

EN 12258-1:1999EN 12258-1:1999
PreviousNext
Standard
EN 12258-1:1999
English language
147 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Pojmi in definicije - 1. del: Splošni pojmiAluminium et alliages d'aluminium - Termes et définitions - Partie 1: Termes générauxAluminium and aluminium alloys - Terms and definitions - Part 1: General terms77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys01.040.77Metalurgija (Slovarji)Metallurgy (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 12258-1:1998SIST EN 12258-1:1999en01-november-1999SIST EN 12258-1:1999SLOVENSKI
STANDARDSIST EN 23134-3:1998SIST EN 23134-4:1998SIST EN 23134-1:1998SIST EN 23134-2:19981DGRPHãþD

SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 515:2017(Main)
Aluminium and aluminium alloys - Wrought products - Temper designations
SIST EN 515:2017

This European Standard establishes temper designations for all forms of wrought aluminium and aluminium alloys and for continuously cast aluminium and aluminium alloys drawing stock and strip intended to be wrought.
NOTE   Some of these temper designations may be subject of patent or patent applications and their listing herein is not to be construed in any way as the granting of a license under such patent right.
Additional temper designations, conforming to this standard, may be standardized with CEN/TC 132 and AECMA/5 provided:
-   the temper is used or is available for use by more than one user;
-   mechanical property limits are defined;
-   the characteristics of the temper are significantly different from those of all other tempers which have the same sequence of basic treatments and for which designations already have been assigned for the same alloy and product;
-   the following are also defined if characteristics other than mechanical properties are considered significant:
a)   test methods and limits for the characteristics; or
b)   the specific practices used to produce the temper.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-1:2012(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
SIST EN 12258-1:2012

This European Standard defines general terms relating to products of aluminium and aluminium alloys which are helpful for communication within the aluminium industry and with its customers .
It includes terms dealing with aluminium products, processing, sampling and testing, product characteristics and different types of visual quality characteristics.
It does not include terms dealing with bauxite mining, alumina and anode production and aluminium smelting.
This European Standard tries to adhere as closely as possible to the terms and definitions used in other standards or documents.
NOTE   For materials other than aluminium, different definitions can apply to terms which are defined in this document.
This European Standard tries to follow the "common language" as it is used in native English speaking countries, without giving preference to specific idioms of any one of these counties. In cases where in different English-speaking countries different terms are used for the same concept or different concepts refer to an identical term, the appropriate explanations are given.

  • Standard
    180 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-2:2004(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis
SIST EN 12258-2:2005

This European Standard defines general terms which are helpful for the communication within the aluminium industry and its customers relating to the chemical analysis.
A glossary (annex A) comprises all terms in alphabetical order which are defined in this standard.
NOTE   Most of the definitions are taken from or closely adapted to ISO standards and/or VIM.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-4:2004(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry
SIST EN 12258-4:2005

This European Standard contains definitions of terms which are helpful for the communication within the aluminium industry, authorities and subcontractors dealing with the shipment, recovery or disposal of residues. It only contains residues which are specific for the aluminium industry. Residues which generally occur with identical inherent properties in other industries and private households are defined in prEN 13965-1.
This European Standard does not contain terms and definitions related to aluminium scrap; such terms and de-finitions can be found in prEN 12258-3.
The inclusion of a material in this standard does not mean that the material is a waste.
Definitions of general terms which are helpful for the communication within the aluminium industry are laid down in EN 12258-1.
A glossary (clause 8) comprises all terms in alphabetical order which are defined in this standard.

  • Standard
    21 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-3:2003(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap
SIST EN 12258-3:2004

This part of EN 302 specifies a method for determining the resistance to delamination of bonded joints.
It is suitable for the following applications:
a) for assessing the compliance of adhesives with prEN 301;
b) for assessing the suitability and quality of adhesives for load-bearing timber structures;
c) for comparing the effects on the bond strength resulting from the choice of bonding conditions, from different climatic conditioning and from the treatment of the test pieces before and after bonding.
This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended for use to provide numerical design data and does not necessarily represent the performance of the bonded member in service. It is not intended to be used to assess the suitability of adhesives for the manufacture of wood-based panels.

  • Standard
    26 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 515:2017(Main)
Aluminium and aluminium alloys - Wrought products - Temper designations
SIST EN 515:2017

This European Standard establishes temper designations for all forms of wrought aluminium and aluminium alloys and for continuously cast aluminium and aluminium alloys drawing stock and strip intended to be wrought.
NOTE   Some of these temper designations may be subject of patent or patent applications and their listing herein is not to be construed in any way as the granting of a license under such patent right.
Additional temper designations, conforming to this standard, may be standardized with CEN/TC 132 and AECMA/5 provided:
-   the temper is used or is available for use by more than one user;
-   mechanical property limits are defined;
-   the characteristics of the temper are significantly different from those of all other tempers which have the same sequence of basic treatments and for which designations already have been assigned for the same alloy and product;
-   the following are also defined if characteristics other than mechanical properties are considered significant:
a)   test methods and limits for the characteristics; or
b)   the specific practices used to produce the temper.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-1:2012(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
SIST EN 12258-1:2012

This European Standard defines general terms relating to products of aluminium and aluminium alloys which are helpful for communication within the aluminium industry and with its customers .
It includes terms dealing with aluminium products, processing, sampling and testing, product characteristics and different types of visual quality characteristics.
It does not include terms dealing with bauxite mining, alumina and anode production and aluminium smelting.
This European Standard tries to adhere as closely as possible to the terms and definitions used in other standards or documents.
NOTE   For materials other than aluminium, different definitions can apply to terms which are defined in this document.
This European Standard tries to follow the "common language" as it is used in native English speaking countries, without giving preference to specific idioms of any one of these counties. In cases where in different English-speaking countries different terms are used for the same concept or different concepts refer to an identical term, the appropriate explanations are given.

  • Standard
    180 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-2:2004(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis
SIST EN 12258-2:2005

This European Standard defines general terms which are helpful for the communication within the aluminium industry and its customers relating to the chemical analysis.
A glossary (annex A) comprises all terms in alphabetical order which are defined in this standard.
NOTE   Most of the definitions are taken from or closely adapted to ISO standards and/or VIM.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-4:2004(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry
SIST EN 12258-4:2005

This European Standard contains definitions of terms which are helpful for the communication within the aluminium industry, authorities and subcontractors dealing with the shipment, recovery or disposal of residues. It only contains residues which are specific for the aluminium industry. Residues which generally occur with identical inherent properties in other industries and private households are defined in prEN 13965-1.
This European Standard does not contain terms and definitions related to aluminium scrap; such terms and de-finitions can be found in prEN 12258-3.
The inclusion of a material in this standard does not mean that the material is a waste.
Definitions of general terms which are helpful for the communication within the aluminium industry are laid down in EN 12258-1.
A glossary (clause 8) comprises all terms in alphabetical order which are defined in this standard.

  • Standard
    21 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-3:2003(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap
SIST EN 12258-3:2004

This part of EN 302 specifies a method for determining the resistance to delamination of bonded joints.
It is suitable for the following applications:
a) for assessing the compliance of adhesives with prEN 301;
b) for assessing the suitability and quality of adhesives for load-bearing timber structures;
c) for comparing the effects on the bond strength resulting from the choice of bonding conditions, from different climatic conditioning and from the treatment of the test pieces before and after bonding.
This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended for use to provide numerical design data and does not necessarily represent the performance of the bonded member in service. It is not intended to be used to assess the suitability of adhesives for the manufacture of wood-based panels.

  • Standard
    26 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day