EN 13880-13:2003

Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

This European Standard describes a method for determining the cohesive extensibility and the adhesion to con-crete of hot applied sealant-systems with or without priming simulating the moving of concrete pavement slabs during cooling conditions in wintertime.

Heiß verarbeitbare Fugenmassen - Teil 13: Prüfverfahren zur Bestimmung des Dehn- und Haftvermögens bei diskontinuierlicher Dehnung

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung des kohäsiven Dehnvermögens und des Haftvermögens von heiß verarbeitbaren Fugenmassensystemen mit oder ohne Grundierung auf Beton unter Simulierung der Bewegung von Betonfahrbahnplatten bei Abkühlungsbedingungen im Winter.

Produits de scellement de joints appliqués à chaud - Partie 13: Méthode d'essai pour la détermination de la traction discontinue (essai d'adhérence)

Cette Norme européenne décrit une méthode pour la détermination de la résistance cohésive à la traction et de l'adhésion de produits de scellement appliqués à chaud avec ou sans primaire visant à simuler le mouvement des dalles de revêtement en béton dans des conditions de refroidissement en hiver.

Tesnilne mase za stike, ki se vgrajujejo po vročem postopku – 13. del: Preskusna metoda za ugotavljanje prekinjenega raztezka (preskušanje adherence)

General Information

• Status: Withdrawn
• Publication Date: 19-Aug-2003
• Withdrawal Date: 05-Jun-2018
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Jun-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13880-13:2004 - Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

Relations

• Replaced By: EN 13880-13:2018 - Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
• Effective Date: 13-Jun-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FHHeiß verarbeitbare Fugenmassen - Teil 13: Prüfverfahren zur Bestimmung des Dehn- und Haftvermögens bei diskontinuierlicher DehnungProduits de scellement de joints appliqués a chaud - Partie 13: Méthode d'essai pour la détermination de la traction discontinue (essai d'adhérence)Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-13:2003SIST EN 13880-13:2004en01-junij-2004SIST EN 13880-13:2004SLOVENSKI
STANDARD



SIST EN 13880-13:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-13August 2003ICS 93.080.20English versionHot applied joint sealants - Part 13: Test method for thedetermination of the discontinuous extension (adherence test)Produits de scellement de joints appliqués à chaud - Partie13: Méthode d'essai pour la détermination de la tractiondiscontinue (essai d'adhérence)Heiß verarbeitbare Fugenmassen - Teil 13: Prüfverfahrenzur Bestimmung des Dehn- und Haftvermögens beidiskontinuierlicher DehnungThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-13:2003 ESIST EN 13880-13:2004



EN 13880-13:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Apparatus.45.1Tensile test rig.45.2Cooling chamber,.56Preparation and conditioning of test specimens.57Storage of test specimens.57.1Air conditioned test specimens.57.2Water immersed test specimens.58Procedure.59Calculation and expression of results.69.1Tensions.69.2Failures.
...