CEN ISO/TS 22475-3:2007

Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007)

ISO/TS 22475-3:2007 is applicable to the conformity assessment of enterprises and personnel performing specified parts of sampling and groundwater measurements according to ISO 22475-1 and complying with the technical qualification criteria given in ISO/TS 22475-2 by third-party control.

Geotechnische Erkundung und Untersuchung - Probenentnahmeverfahren und Grundwassermessungen - Teil 3: Konformitätsbewertung von Unternehmen und Personal durch eine Zertifizierungsstelle (ISO/TS 22475-3-3:2007)

Diese Technische Spezifikation gilt für die Konformitätsbewertung von Unternehmen und Personal, die spezi¬fizierte Teile von Probenentnahmen und Grundwassermessungen nach ISO 22475 1 ausführen und den in ISO/TS 22475 2 angegebenen Qualifikationskriterien mittels Konformitätsbewertung durch eine Zertifi¬zierungsstelle entsprechen.

Reconnaissance et essais géotechniques - Méthodes de prélèvement et mesurages piézométriques - Partie 3: Évaluation de la conformité des entreprises et du personnel par un organisme tiers (ISO/TS 22475-3:2007)

Geotehnično preiskovanje in preskušanje - Metode vzorčenja in preiskav podzemne vode - 3. del: Ugotavljanje skladnosti za vodstvo in osebje tretje stranke (ISO/TS 22475-3:2007)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2007
• Withdrawal Date: 04-Oct-2022
• ICS: 03.100.30 - Management of human resources
• ICS: 03.120.20 - Product and company certification. Conformity assessment
• ICS: 93.020 - Earthworks. Excavations. Foundation construction. Underground works
• Technical Committee: CEN/TC 341 - Geotechnical Investigation and Testing
• Drafting Committee: CEN/TC 341 - Geotechnical Investigation and Testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-Oct-2022
• Ref Project: SIST-TS CEN ISO/TS 22475-3:2008 - Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007)

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2008
*HRWHKQLþQRSUHLVNRYDQMHLQSUHVNXãDQMH0HWRGHY]RUþHQMDLQSUHLVNDY
SRG]HPQHYRGHGHO8JRWDYOMDQMHVNODGQRVWL]DYRGVWYRLQRVHEMHWUHWMHVWUDQNH
,6276
Geotechnical investigation and testing - Sampling methods and groundwater
measurements - Part 3: Conformity assessment of enterprises and personnel by third
party (ISO/TS 22475-3:2007)
Geotechnische Erkundung und Untersuchung - Aufschluss- und
Probenentnahmeverfahren und Grundwassermessungen - Teil 3: Konformitätsbewertung
von Unternehmen und Personal durch eine Zertifizierungsstelle (ISO/TS 22475-3-
3:2007)
Reconnaissance et essais géotechniques - Méthodes de prélèvement et mesurages
piézométriques - Partie 3: Évaluation de la conformité des entreprises et du personnel
par un organisme tiers (ISO/TS 22475-3:2007)
Ta slovenski standard je istoveten z: CEN ISO/TS 22475-3:2007
ICS:
03.100.30 Vodenje ljudi Management of human
resources
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CEN ISO/TS 22475-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2007
ICS 03.120.20; 03.100.30; 93.020

English Version
Geotechnical investigation and testing - Sampling methods and
groundwater measurements - Part 3: Conformity assessment of
enterprises and personnel by third party (ISO/TS 22475-3:2007)
Reconnaissance et essais géotechniques - Méthodes de Geotechnische Erkundung und Untersuchung - Aufschluss-
prélèvement et mesurages piézométriques - Partie 3: und Probenentnahmeverfahren und
Évaluation de la conformité des entreprises et du personnel Grundwassermessungen - Teil 3: Konformitätsbewertung
par un organisme tiers (ISO/TS 22475-3:2007) von Unternehmen und Personal durch eine
Zertifizierungsstelle (ISO/TS 22475-3-3:2007)
This Technical Specification (CEN/TS) was approved by CEN on 22 November 2004 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 22475-3:2007: E
worldwide for CEN national Members.

Contents Page
Foreword.3
Foreword
This document (CEN ISO/TS 22475-3:2007) has been prepared by Technical Committee CEN/TC 341
"Geotechnical Investigation and Testing", the secretariat of which is held by DIN, in collaboration with
Technical Committee ISO/TC 182 "Geotechnics".
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

TECHNICAL ISO/TS
SPECIFICATION 22475-3
First edition
2007-09-15
Geotechnical investigation and testing —
Sampling methods and groundwater
measurements —
Part 3:
Conformity assessment of enterprises
and personnel by third party
Reconnaissance et essais géotechniques — Méthodes de prélèvement
et mesurages piézométriques —
Partie 3: Évaluation de la conformité des entreprises et du personnel
par un organisme tiers
Reference number
ISO/TS 22475-3:2007(E)
©
ISO 2007
ISO/TS 22475-3:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved

ISO/TS 22475-3:2007(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Conformity assessment of enterprises . 2
4.1 General. 2
4.2 Eligibility for conformity assessment. 2
4.3 Assessment of the enterprise . 2
5 Conformity assessment of personnel . 4
5.1 General. 4
5.2 Conformity assessment of the responsible expert . 4
5.3 Conformity assessment of the qualified operator. 6
Bibliography . 9

ISO/TS 22475-3:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In other circumstances, particularly when there is an urgent market requirement for such documents, a
technical committee may decide to publish other types of normative document:
— an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in
an ISO working group and is accepted for publication if it is approved by more than 50 % of the members
of the parent committee casting a vote;
— an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical
committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting
a vote.
An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a
further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is
confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an
International Standard or be withdrawn.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TS 22475-3 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 341, Geotechnical investigation and testing, in collaboration with Technical Committee ISO/TC 182,
Geotechnics, Subcommittee SC 1, Geotechnical investigation and testing, in accordance with the Agreement
on technical cooperation between ISO and CEN (Vienna Agreement).
ISO 22475 consists of the following parts, under the general title Geotechnical investigation and testing —
Sampling methods and groundwater measurements:
⎯ Part 1: Technical principles for execution
⎯ Part 2: Qualification criteria for enterprises and personnel [Technical Specification]
⎯ Part 3: Conformity assessment of enterprises and personnel by third party [Technical Specification]
iv © ISO 2007 – All rights reserved

ISO/TS 22475-3:2007(E)
Introduction
ISO 22475-1 specifies the technical principles for the execution of sampling and groundwater measurements.
The quality of these services can be proven by:
a) a declaration of conformity by a contractor (first party control);
b) a declaration of conformity by a client (second party control);
c) a declaration of conformity by a conformity assessment body (third party control).
Every enterprise or individual may decide if and how they can prove the fulfilment of the technically related
criteria: by first-, second- or third-party control because no part of ISO 22475 requires such a declaration.
ISO/TS 22475-2 specifies the qualification criteria for enterprises and personnel that perform sampling and
groundwater measurements in accordance with ISO 22475-1.
The conformity assessment by third-party control may be made in accordance with the technical principles for
execution of sampling and groundwater measurements in accordance with ISO 22475-1 as indicated in
ISO/TS 22475-2 and the conformity assessment procedure given in this Technical Specification.

TECHNICAL SPECIFICATION ISO/TS 22475-3:2007(E)

Geotechnical investigation and testing — Sampling methods
and groundwater measurements —
Part 3:
Conformity assessment of enterprises and personnel by third
party
1 Scope
This Technical Specification is applicable to the conformity assessment of enterprises and personnel
performing specified parts of sampling and groundwater measurements in accordance with ISO 22475-1 and
complying with the technical qualification criteria given in ISO/TS 22475-2 by third-party control.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the editi
...