EN 60297-3-108:2015

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units

IEC 60297-3-108:2014 provides dimensions and features for R-type subracks and plug-in units, i.e. ruggedized variants of the mechanical structures of the 482,6 mm (19 in) series, with enhanced vibration and shock resistance and/or improved EMC performance, for use in more harsh environment. This leads to a subrack standard which is externally compatible with IEC 60297-3-100 but internally largely incompatible with IEC 60297-3-101. R-type subracks, chassis integrated subracks and plug-in units incorporate dimensions and features which provide for a higher level of ruggedness, compared with IEC 60297-3-101 (test set-up and load definitions are selected from IEC 61587-1 and IEC 61587-5). Key words: R-Type, Subracks, Plug-in unit

Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise - Teil 3-108: Maße von Baugruppenträgern und steckbaren Baugruppen Typ R

Structures mécaniques pour équipements électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) - Partie 3-108: dimensions des bacs de type r et des blocs enfichables

IEC 60297-3-108:2014 donne les dimensions et caractéristiques des bacs de type R et des blocs enfichables, c'est-à-dire des variantes renforcées des structures mécaniques de la série 482,6 mm (19 pouces), avec une augmentation de la résistance aux vibrations et aux chocs et/ou une amélioration des performances CEM, pour utilisation dans un environnement plus sévère. Ceci donne lieu à une norme sur les bacs, qui est compatible d'un point de vue externe avec l'IEC 60297-3-100, mais largement incompatible d'un point de vue interne avec l'IEC 60297-3-101. Les bacs de type R, les bacs intégrés au châssis et les blocs enfichables comportent des dimensions et des caractéristiques qui fournissent un niveau plus élevé de robustesse, par rapport à l'IEC 60297-3-101 (les définitions relatives au montage d'essai et à la charge sont choisies dans l'IEC 61587-1 et l'IEC 61587-5). Mots-clés: type R, bacs, bloc enfichable

Mehanske konstrukcije za elektronsko opremo - Mere mehanskih konstrukcij serije 482,6 mm (19 palcev) - 3-108. del: Mere okvirov vrste R in vtičnih enot

Ta del standarda IEC 60297 podaja dimenzije in lastnosti okvirov vrste R in vtičnih enot, tj. odpornejše različice mehanskih struktur serije 482,6 mm (19 in) z izboljšano odpornostjo na vibracije in udarce in/ali izboljšanim delovanjem elektromagnetne združljivosti, namenjene uporabi v ostrejših okoljih. S tem se pridobi standard okvira, ki je eksterno združljiv s standardom IEC 60297-3-100, interno pa večinoma nezdružljiv s standardom IEC 60297-3-101. Dimenzije in lastnosti okvirov tipa R, okvirov, vgrajenih v šasijo, in vtičnih enot nudijo večjo stopnjo trpežnosti v primerjavi s standardom IEC 60297-3-101 (priprava preskusa in opredelitve bremena so izbrane iz standardov IEC 61587-1 in IEC 61587-5).

General Information

• Status: Published
• Publication Date: 15-Jan-2015
• Withdrawal Date: 13-Oct-2017
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 48D - Mechanical structures for electronic equipment
• Drafting Committee: IEC/SC 48D - IEC_SC_48D
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 16-Jan-2015
• Completion Date: 16-Jan-2015
• Ref Project: SIST EN 60297-3-108:2015 - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 108: Dimensions of R-type subracks and plug-in units

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60297-3-108:2015
01-september-2015
0HKDQVNHNRQVWUXNFLMH]DHOHNWURQVNRRSUHPR0HUHPHKDQVNLKNRQVWUXNFLMVHULMH
PPSDOFHYGHO0HUHRNYLURYYUVWH5LQYWLþQLKHQRW
0HFKDQLFDOVWUXFWXUHVIRUHOHFWURQLFHTXLSPHQW'LPHQVLRQVRIPHFKDQLFDOVWUXFWXUHVRI
WKHPPLQVHULHV3DUW'LPHQVLRQVRI5W\SH
VXEUDFNVDQGSOXJLQXQLWV
Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-in-)Bauweise - Teil
3-108: Maße von Baugruppenträgern und steckbaren Baugruppen Typ R
Structures mécaniques pour équipements électroniques - Dimensions des structures
mécaniques de la série 482,6 mm (19 pouces) - Partie 3-108: dimensions des bacs de
type r et des blocs enfichables
Ta slovenski standard je istoveten z: EN 60297-3-108:2015
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 60297-3-108:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60297-3-108:2015

---------------------- Page: 2 ----------------------

SIST EN 60297-3-108:2015


EUROPEAN STANDARD EN 60297-3-108

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2015
ICS 31.240

English Version
Mechanical structures for electronic equipment - Dimensions of
mechanical structures of the 482,6 mm (19 in) series - Part 3-
108: Dimensions of R-type subracks and plug-in units
(IEC 60297-3-108:2014)
Structures mécaniques pour équipements électroniques - Bauweisen für elektronische Einrichtungen - Maße der
Dimensions des structures mécaniques de la série 482,6 482,6-mm-(19-in-)Bauweise - Teil 3-108: Maße von
mm (19 pouces) - Partie 3-108: dimensions des bacs de Baugruppenträgern und steckbaren Baugruppen Typ R
type r et des blocs enfichables (IEC 60297-3-108:2014)
(IEC 60297-3-108:2014)
This European Standard was approved by CENELEC on 2014-10-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60297-3-108:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60297-3-108:2015
EN 60297-3-108:2015 - 2 -
Foreword
The text of document 48D/565/FDIS, future edition 1 of IEC 60297-3-108, prepared by SC 48D,
"Mechanical structures for electronic equipment", of IEC TC 48, "Electromechanical components and
mechanical structures for electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60297-3-108:2015.

The following dates are fixed:
(dop) 2014-07-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-10-14
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60297-3-108:2014 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60297-3-108:2015
- 3 - EN 60297-3-108:2015

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispe
...